Heanjia Super-Metals Co., Ltd

Heanjia Super-Metals Co., Ltd

Company Product

  • Monel 400 sheet
  • Monel 400 alloy Sheet offers tremendous resistance to the variety of corrosive media including non oxidizing solutions, salt and caustic solutions. The alloy is recommended for using at the elevated temperatures in the reducing and oxidizing conditions. It inhibits the stress corrosion cracking.

     

    Monel 400 alloy Sheet attains high strength. It is highly purposeful for using in the sea engineering and freshwater tanks as it offers more resistance than the copper alloys. It causes resistance to pitting corrosion in the fresh and used waters.

     

    Chemical composition of Monel 400 Sheet:

    C

    Mn

    S

    Si

    Ni

    Cu

    Fe

    0.30

    2.00

    0.024

    0.50

    63.0

    28.0-34.0

    2.50

     

    Bearing strength of Monel 400 Sheet:

    Temper

    Yield strength, ksi

    Ultimate Strength, ksi

    Annealed

    58.0

    145.0

    Half-Hard

    98.1

    166.0

    Full-Hard

    162.0

    211.5

     

    Characteristics of Monel 400 Sheet:

    1. Excellent resistance to brackish water, stress corrosion cracking in freshwaters.
    2. Intense resistance to de-aerated hydrochloric, hydrofluoric and sulfuric acids
    3. Superior resistance to neutral and alkaline salt and chloride induced stress corrosion cracking

    4 Tremendous resistance to alkalis and seawater and steam at the elevated temperatures

     

    Manufacture's Objective Comments to Monel 400 Sheet/Plate/Strip:
    The Monel 400 sheet offers significant resistance to the extensive range of corrosive conditions as mentioned above but it is not suitable to use in the oxidizing conditions like nitric acid and nitrous acid. It is cheap and has good mechanical character.

     

    Applications of Monel 400 sheet:

    1.Chemical and hydrocarbon treatment device

    2.Gasoline and freshwater tanks

    3.Crude petroleum stills and marine operations

    4.De-aerating heaters

    5.Boiler feed water heaters and other heat exchangers

     

  • Send Inquiry
  • Inconel plate/sheet
  • Inconel plate/sheet provides extensive resistance to the wide array of corrosive conditions. It causes resistance to the oxidizing and reducing media, alkaline conditions. It is suitable for implementing in the natural chloride conditions such as water and oxygen and hardly stands against stress corrosion cracking. Heanjia Super Metals manufactures highly versatile and economical straight plate/sheet.

     

    The Inconel plate/sheet can be friction driven to achieve the required properties, such as strength, high temperature resistance and corrosion resistance for particular tracking.

     

    Features of Inconel plate/sheet

    1.It offers the maximum opening area for supply

    2.Easily cleanable and good drive

    3.Sleek belt surface

    4.Large stress tolerable

    5.No belt slip and enhanced design

    6.Minor contact surface and improved heat supply

     

    Applications of Inconel plate/sheet

    1.Textiles and chemical processing via oven dryers

    2.Washing, annealing, quenching and polishing processes

    3.Food processing for clean, dry, bake and freeze

    4.Sintering furnaces

    5.Electronics and agriculture

    6.Automotive

  • Send Inquiry
  • Inconel 625 wire
  • Inconel 625 wire is widely purposeful in the elevated temperatures while it maintains its mechanical strength. It offers superior combination of large strength and excellent resistance to the various corrosive media. The presence of nickel and chromium offers the inconel alloy exceptionally high strength at the elevated temperature ranges. 

     

    With extended fatigue strength, Inconel 625 wire is useful in the pressure tubes at temperatures of 815oC. It is employed at the cryogenic temperatures upto 980oC. 

     

    Chemical Composition of Inconel 625 Wire

    Alloy

    %

    Ni

    Cr

    Mo

    Al

    Nb

    C

    Co

    Mn

    Ti

    Si

    Fe

    Inconel 625

    Min.

     

    20.0

    8.0

    0.80

    3.15

     

     

     

     

     

     

    Max.

    58.0

    23.0

    10.0

    1.50

    4.15

    0.1

    1.0

    0.50

    0.40

    0. 5

    5.00

    Mechanical Properties of Inconel 625 Wire

    Item

    Annealed

    Solution annealed

    Tensile Strength, (Mpa)

    830

    690

    Yield Strength (0.2% Offset), (Mpa)

    415

    275

    Elongation, %

    30

    30

    Characteristics of Inconel 625 Wire

    1. Excellent resistance to corrosion provided by different sources
    2. Superior resistance to pitting and crevice corrosion.
    3. Large resistance to corrosion of fresh water, sea water, neutral salts and alkaline media.

    Applications of Inconel 625 Wire

    1. Aerospace Components
    2. Chemical processing houses
    3. Marine applications
    4. Power Houses
  • Send Inquiry
  • Hastelloy c276 plate
  • Hastelloy C-276 plate  is featured with the superior resistance to corrosion. It restricts the grain precipitation in the welded regions that makes it fit for employing in the chemical operations. It gives extensive resistance to the oxidizing and reducing conditions. It offers resistance to chlorides, organic and inorganic acids. Heanjia Super-Metals manufactures highly versatile and economical straight moving Hastelloy C-276 plate.

    The Hastelloy C-276 plate offers the required properties such as strength, high temperature resistance and corrosion resistance for particular tracking.

    Size

    Thickness: above 1mm, width: 100mm-1700mm, length: 800mm-3000mm

     

    Features of Hastelloy C-276 plate

    1.It offers the maximum opening area for supply

    2.Easily cleanable and good drive

    3.Sleek belt surface

    4.Large stress tolerable

    5.No belt slip and enhanced design

    6.Minor contact surface and improved heat supply

     

    Applications of Hastelloy C-276 plate

    1.Textiles and chemical processing via oven dryers

    2.Washing, annealing, quenching and polishing processes

    3.Food processing for clean, dry, bake and freeze

    4.Sintering furnaces

    5.Electronics and agriculture

    6.Automotive

  • Send Inquiry
  • Inconel round bar
  • Inconel Round Bar offers superior resistance to oxidation and carburization. It shows excellent combination of resistance to different corrosive media and elevated temperature strength. It resists the chloride ion stress corrosion cracking, pitting and crevice corrosion and high mechanical strength. It offers service temperature up to 1800oF.

    Inconel Round Bar is categorized into following grades:

    Inconel 600 Round Bar

    Inconel 601 Round Bar

    Inconel 617 Round Bar

    Inconel 625 Round Bar

    Inconel 718 Round Bar

     

    Inconel Round Bar is a wide regulatory class of wire fabric that is made through specific weaving methods. The Wire Mesh screen has four primary operations such as screening, filter, printing and intensification. We produce and export wire mesh in coarse to fine aperture of sieving and screening. We manufacture the fine mesh with apertures about 300 mesh(max) and coarse mesh with wire diameter of 16mm(max).

  • Send Inquiry
  • C276 bar
  • Hastelloy C 276 Rod endows with wider resistance to corrosion in the variety of corrosive and chemical media as well as pitting and crevice corrosion. It resists oxidation at about 1900oF.

    Specification of Hastelloy C-276 Rod

    Rod Size

    diameter: 3mm above, length: 20mm above

     Chemical Properties of Hastelloy C-276 Rod:-

     

    Ni

    Cr

    Mn

    Mo

    C

    Si

    Fe

    Max

    Bal.

    16.5

    1.0

    17.0

    0.010

    0.08

    7.0

    Min

     

    14.5

     

    15.0

     

     

    4.0

    Physical Properties of Hastelloy C-276 Rod:- 

    Property

    Density

    Melting Point

    Co-efficient of Expansion

    Modulus of Rigidity

    Modulus of Elasticity

    Metric

    8.89 g/cm3

    1370 °C

    11.2 μm/m.°C (20-100 °C)

    78.6 kN/mm2

    205.5 kN/mm2

    Imperial

    0.321 lb/in3

    2500 °F

    6.2x10-6 in/in.°F (70-212°F)

    11400 ksi

    29806 ksi

     Minimum mechanical properties in the room temperature of Hastelloy C-276 Rod Alloy:-

    Alloy status

    Tensile strengthRm N/mm2

    Yield strength RP0.2 N/mm2

    Elongation A5 %

    Solution treatment

    690

    283

    40

    Characteristics of Hastelloy C-276 Rod:-

    1. Resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.
    2. Outstanding resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides.
    3. Suitable for many chemical process applications. 

    Applications of Hastelloy C-276 Rod:-

    1. Digester and bleach plants in the paper industry.
    2. Components exposed to sour gas.
    3. Equipment for flue-gas desulfurization plants.
    4. Evaporators, heat exchangers, filters and mixers used in sulphuric acid environments.

     

  • Send Inquiry
  • Monel sheet
  • Monel Sheet has a greater tendency toward stress-corrosion cracking in some conditions than Monel 400 alloy Sheet. The strength of this nickel Copper alloy is maintained to 1200ºF but stays ductile and tough down to temperatures of 400ºF.

     

    Monel Sheet offers higher tendency to the stress corrosion cracking, improved tensile strength and yield strength rather than Monel k500 sheet. It maintains large potential and ductile nature at temperatures even lower than 400oF.

    The resistance to corrosion Monel Sheet/Strip offers intense resistance to the sour gas, hydrogen sulfide solutions in the acidic and basic mediums.  The permutation of nominal corrosion rate in the fast moving sea water and high potential makes Monel K500 sheet best for the production of sea water operation components.


    Specification

    Sheet Size

    thickness: above 1mm, width: 100mm-1700mm, length: 800mm-3000mm

     


    The physical properties of Monel K-Sheet are:

    Density

    8.44 g/cm3

    Melting Range

    1315-1350 oC or 2400-2600oF

    Modulus of Elasticity,

    103 ksi

    Tension

    26.0

    Torsion

    9.5

    Poisson’s Ratio

    0.32

     

    Characteristics of Monel sheet:

    1.Excellent resistance to the stress corrosion cracking.

    2.Highly ductile and hard

    3.Resistance to sour gas conditions and pitting corrosion

    4.High Yield strength and Tensile strength


    Applications of Monel Sheet:

    1. Oil well drill collars and equipments,
    2. Pump shafts and impellers and non magnetic operations,
    3. Protected lifting and valves for oil and gas generation
    4. Sensing equipment and other electronics.
  • Send Inquiry
  • Inconel bar
  • Inconel Rod offers enormous resistance to heat, oxidation and corrosion at the elevated temperatures. It also resists aqueous corrosion and possesses significant mechanical potential. Moreover it can be conveniently formed and weldable.

    Specification:

    Rod Size

    diameter: 3mm above, length: 20mm above

     

    Chemical composition of Inconel 601 Rod is provided below:

    Nickel

    58.0-63.0 %

    Chromium

    21.0-25.0 %

    Iron

    Bal.

    Aluminum

    1.0-1.7 %

    Carbon

    0.10 %

    Manganese

    1.0 %

    Sulfur

    0.015 %

    Silicon

    0.50 %

    Copper

    1.0 %

     

    The below table shows the physical properties of Inconel bar

    Density

    8.11 Mg/m3

    Melting Range

    1360-1411 °C

    Specific Heat, 70°F,

    448, J/kg-°C

    Permeability at 200 oersted (15.9 kA/m) at 24°C

    1.003

    Curie Temperature °C

    -196

     

    The thermal and electrical characteristics of Inconel Rod are given below:

    Temperature,°F

    Electrical Resistivity

    ohm-circ mil/f

    Thermal

    Conductivity

    Btu-in./ft 2-hr°F

    Coeff. of

    Expansion

    10-6  in./in./°F

    Specific

    Heat Btu/lb-°F

    70

    710

    78

    -

    0.107

    200

    716

    87

    7.60

    0.112

    400

    727

    100

    8.01

    0.119

    600

    735

    113

    8.11

    0.126

    800

    741

    126

    8.30

    0.133

     

    Features of Inconel Rod:

    1. Superior resistance to sodium hydroxide solutions, chloride stress corrosion cracking.
    2. As with austenitic stainless steels Inconel 601 can be sensitized to intergranular corrosion in some aggressive media after heating in the temperatures range 540ºC - 760ºC.

     

    Applications of Inconel Bar

    1. Thermal processing baskets, trays, fixtures, radiant tubes, muffles, retorts, flame shields, and electrical resistance heating wires.
    2. Thermocouple safety tubes, process heaters, condenser tubes and catalyst supports
  • Send Inquiry
  • Inconel 625 Bar
  • Inconel 625 Bar resists corrosion by pitting and crevice corrosion, chloride ion stress corrosion cracking, oxidation and scaling at the elevated temperature. It gets stabilized against sensitization while welding process so avoid the rapid intergranular cracking.

    Specification:

    Bar Size

    diameter: 3mm above, length: 20mm above

     

    Chemical Composition of Inconel 625 Bar

    Alloy

    %

    Ni

    Cr

    Mo

    Al

    Nb

    C

    Co

    Mn

    Ti

    Si

    Fe

    Inconel 625

    Min.

     

    20.0

    8.0

    0.80

    3.15

     

     

     

     

     

     

    Max.

    58.0

    23.0

    10.0

    1.50

    4.15

    0.1

    1.0

    0.50

    0.40

    0. 5

    5.00

     

    Mechanical Properties of Inconel 625 Bar

    Item

    Annealed

    Solution annealed

    Tensile Strength, (Mpa)

    830

    690

    Yield Strength, (Mpa)

    415

    275

    Elongation, %

    30

    30

     

    Characteristics of Inconel 625 Bar

    1. Intense resistance to corrosion in the variety of corrosive media, pitting and crevice corrosion.

    2 Excellent resistance to corrosion of fresh water, sea water, neutral salts and alkaline media.

     

    Applications

    1. Aerospace Components
    2. Chemical processing houses
    3. Marine applications
    4. Power Houses
  • Send Inquiry
  • Nichrome strip
  • Nichrome strip is basically an austenitic Ni-Cr alloy that is utilized in the elevated temperature conditions about 1200oC. Nikrothal 80 resistance wire exhibits higher formation competency and weldability. It offers superior resistance to corrosion as well as oxidation. The alloy wire retains its ductile character even after long use.

     

    Nichrome strip is purposeful as the electric heating equipments in the domestic as well a commercial furnaces. Due to high electric resistivity coefficient at the elevated temperatures it generates large amount of heat when warmed up. Its resistance increases with further increase in temperature.

     

    Chemical composition of Nichrome 80 strip

     

    C %

    Si %

    Mn %

    Cr %

    Ni %

    Fe %

    Trace elements

    Min

    -

    1.0

    -

    19.0

    Bal

    -

    Added

    Max

    0.10

    1.7

    1.0

    21.0

    -

    2.0*

    Added

     

    Physical properties of Nichrome strip

    Density g/cm3

    8.30

    Electrical resistivity at 20̊C ¦¸ mm2/m

    1.09

     

    Applications of Nichrome strip

    1. Flat irons, ironing machines, water heaters
    2. Plastic molding dies, soldering irons
    3. Metal sheathed tubular elements and cartridges.
  • Send Inquiry
  • Hastelloy sheet
  • Hastelloy sheet/plate offers tremendous consistency at the grand temperature limits, extremely ductile and introduces broad resistance to corrosion even after aging about 1200oF to 1900oF. It restricts the development of grain precipitates in the welded heating zones.

     

    Specification

    Sheet Size

    thickness: above 1mm, width: 100mm-1700mm, length: 800mm-3000mm

     

    Characteristics of Hastelloy sheet/plate

    1. Enhanced mechanical features at grand level temperatures
    2. Resists corrosion at ambient temperatures and resistance to oxidation
    3. Precipitation Hardenable

    Applications of Hastelloy sheet/plate

    1. Chemical processes
    2. Vacuum Furnaces
    3. Mechanical sections in reducing conditions.

     

  • Send Inquiry