Devcon Brushable Ceramic Blue
Description : Devcon Brushable Ceramic putty is brushable, high performance ceramic-filled epoxy for sealing, protecting and repairing surfaces subject to erosion.
Intended Use of Devcon Brushable Ceramic : Seal and protect new equipment exposed to erosion and corrosion; protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat for providing exceptionally smooth surface to repaired surfaces.
Features of Devcon Brushable Ceramic : Excellent chemical resistance, Temperature resistance to 350 Degrees F, Applies easily with short - bristle brush or roller, Low viscosity, self - leveling liquid.
Limitations of Devcon Brushable Ceramic : None
Features of Devcon Brushable Ceramic: Excellent chemical resistance, Temperature resistance to 350 oF, Applies easily with short - bristle brush or roller, Low viscosity, self - leveling liquid.
Limitations: None
Properties Devcon Brushable Ceramic :
Color - Blue
Mix Ratior by Volume 3.4:1
Mix Ratior by Weight 5.6:
% Solids by Volume 100
Pot Life @ 75F 40
Specific Volume 16.5 in. (3)/lb
Cured Shrinkage 0.0020 in./in
Specific Gravity 1.53 gm/cc
Temperature Resistance Wet : 150 Degrees Farenheight ; Dry: 350 Degrees Farenheight
Co eff of Thermal Expansion ASTM D 696
Coverage/lb 7.6 sq.ft./lb mils ( 0.15in.)
Cured Hardness 90D
Dielectric Strength 382 volts/mils
Dielectric Constant 3.87 @ 1 MHz
Adhesive Tensile Shear -2,000 psi
Compressive Strength -15,200 psi
Modulus of Elasticity - 9.0 psi x 10(5)
Flexural Strength - 8,000 psi
Coefficient of Expansion Thermal 19 [(in.) x (in). x Degrees Farenheight) ] x 10 (-6)
Thermal Conductivity 1.92 [(cal x cm) x degree centigrade C)] x 10 (-3)
Brush Coat Thickness 10-20 mils (.010-.020 in.)
Cure Time - 16 hrs
Recoat Time: 4-6 hrs
Salt Spray Resistance 5,000 hrs
Mixed Viscosity 32,000 cps
Chemical resistance of Devcon Brushable Ceramic is calculated with a 7 day, room temp. cure ( 30 days immersion @ 70 degrees Degrees Farenheight )
Resistance to :
Benzene -Excellent
Sodium Hydroxide 10% - Excellent
Gasoline (Unleaded) - Excellent
Sodium Hydroxide 50% -Excellent
Hydrdegrees centigradehloric 10% - Very good
Sodium HypoChlorite- Very good
Kerosene - Excellent
Sulfuric 10% - Very good
Mineral Spirits - Excellent
Sulfuric 50% - Fair
Nitric 50% - Poor
Toluene - Excellent
Phosphoric10% - Very good
Xylene - Fair
Potassium Hydroxide 40% - Excellent
Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul, INDUSTRIAL EPOXY PUTTIES, 180 Degrees Centigrade, ON LINE LEAK ARRESTOR, DEVCON, EPOXY PUTTY, BRUSHABLE CERAMIC, TITANIUM PUTTY, STEEL PUTTY, HIGH TEMPERATURE, RESISTANT, PUTTY, BELZONA 1111, BELZONA BRUSHABLE CERAMIC, BELOZONA EPOXY PUTTY, WURTH SILICON SPRAY, Instant Adhesive, Anti Corrosive Coating, Metal Repair Putties, Cold welding Compound, Bronze Putty, Wet Surface Putty, Abrasion Resistant Putty, Under water Putty, Devcon Plastic Steel Putty, Devcon 5 Minutes Epoxy Putty, Devcon 5 Minute Epoxy Putty, Devcon Stainless Steel Putty, Devcon Metal Magic Bond, Devcon Aluminum Putty, Machinable Putty, Easily Drilled Putty, Online Leak Arrestor, High temperature resistant leak arrestor.
