Devcon Brushable Ceramic Red
Description: Devcon Brushable Ceramic Putty is A brushable, high performance ceramic-filled epoxy for sealing, protecting and repairing surfaces subject to erosion.
Intended Use of Devcon Brushable Ceramic: Seal and protect new equipment exposed to erosion and corrosion; protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat for providing exceptionally smooth surface to repaired surfaces.
Product: Devcon Brushable Ceramic Red is Acceptable for use in meat and poultry plants,
Features of Devcon Brushable Ceramic: Excellent chemical resistance, Temperature resistance to 350 Degrees Farenheight , Applies easily with short - bristle brush or roller, Low viscosity, self - leveling liquid.
Limitations for Devcon Brushable Ceramic : None
Compliance : Approved for use in meat and poultry plants (red only)
Properties of Devcon Brushable Ceramic :
Color - Red or Blue
Mix Ratior by Volume 3.4:1
Mix Ratior by Weight 5.6:
% Solids by Volume 100
Pot Life @ 75F 40
Specific Volume 16.5 in. (3)/lb
Cured Shrinkage 0.0020 in./in
Specific Gravity 1.53 gm/cc
Temperature Resistance Wet : 150 Degrees Farenheight; Dry: 350 Degrees Farenheight
Co eff of Thermal Expansion ASTM D 696
Coverage/lb 7.6 sq.ft./lb mils ( 0.15in.)
Cured Hardness 90D
Dielectric Strength 382 volts/mils
Dielectric Constant 3.87 @ 1 MHz
Adhesive Tensile Shear -2,000 psi
Compressive Strength -15,200 psi
Modulus of Elasticity - 9.0 psi x 10(5)
Flexural Strength - 8,000 psi
Coefficient of Expansion Thermal 19 [(in.) x (in). x Degrees Farenheight) ] x 10 (-6)
Thermal Conductivity 1.92 [(cal x cm) x degree centigrade C)] x 10 (-3)
Brush Coat Thickness 10-20 mils (.010-.020 in.)
Cure Time - 16 hrs
Recoat Time: 4-6 hrs
Salt Spray Resistance 5,000 hrs
Mixed Viscosity 32,000 cp
Chemical resistance of Devcon Brushable Ceramic is calculated with a 7 day, room temp. cure ( 30 days immersion @ 70 degrees Degrees Farenheight )
Resistance to :
Benzene -Excellent
Sodium Hydroxide 10% - Excellent
Gasoline (Unleaded) - Excellent
Sodium Hydroxide 50% -Excellent
Hydrdegrees centigradehloric 10% - Very good
Sodium HypoChlorite- Very good
Kerosene - Excellent
Sulfuric 10% - Very good
Mineral Spirits - Excellent
Sulfuric 50% - Fair
Nitric 50% - Poor
Toluene - Excellent
Phosphoric10% - Very good
Xylene - Fair
Potassium Hydroxide 40% - Excellent
Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul, INDUSTRIAL EPOXY PUTTIES, 180 Degrees Centigrade, ON LINE LEAK ARRESTOR, DEVCON, EPOXY PUTTY, BRUSHABLE CERAMIC, TITANIUM PUTTY, STEEL PUTTY, HIGH TEMPERATURE, RESISTANT, PUTTY, BELZONA 1111, BELZONA BRUSHABLE CERAMIC, BELOZONA EPOXY PUTTY, Devcon Aluminum Putty, Online Leak Arrestor, High temperature resistant leak arrestor, Marine Grade Putties, Food Grade Epoxy Putty, Devcon Plastic Steel Putty (A), Devcon Plastic Steel 5 Min Putty (SF), Devcon Titanium Putty, Devcon Brushable Ceramic Blue / Red, Devcon Wet Surface Repair Putty (UW), Devcon Wet Surface Repair Putty (UW), Devcon Aluminium Putty (F), Devcon Bronze Putty (BR), Devcon Stainless Steel Putty (ST), Devcon Flexane 80, Aquafix, Aquafix Pipe repair kit, Transformer Oil leak Sealant, Online Oil Leak Sealant, Pipe Leak Sealant,BELZONA 1111.