DEVCON Plastic Steel 5 Minute Putty SF
Description: Devcon Plastic Steel 5 Minute Putty is a Steel-filled, fast-setting epoxy putty for filling, and bonding metal surfaces.
Intended Use: Devcon Plastic Steel 5 Minute Putty Restores worn on fatiqued metals; patches castings; makes jigs and fixtures; rebuilds pump and valve bodies; restores bearing journals and races,
Devcon Plastic Steel 5 Minute PuttCan also stop online Leakages in Transformers, Pipes, Radiators Etc.
Devcon Plastic Steel 5 Minute Putty : Bonds to aluminum, concrete, and many other metals
Features of Devcon Plastic Steel 5 Minute Putty: It is Resistant to chemicals and most acids, bases, solvents, and alkalis. Applies easily to vertical surfaces.
Limitations of Devcon Plastic Steel 5 Minute Putty: Machinable to metallic finish not recommended for long term exposure to concentrated acids or o organic solvents.
Typical: Technical data should be considered.
Physical Properties of Devcon Plastic Steel 5 Minute Putty: representative or typical only and should not be used for specification purposes.
Cured 7 days @ 70 degrees Degrees Farenheight
Devcon Plastic Steel 5 Minute Putty Color - Dark Grey
Devcon Plastic Steel 5 Minute Putty Mix Ratio by Volume - 1:1
Devcon Plastic Steel 5 Minute Putty Mix Ratio by Weight - 1.7:1
Devcon Plastic Steel 5 Minute Putty % Solids by Volume - 100
Devcon Plastic Steel 5 Minute Putty Pot Life @ - 75F 5min
Devcon Plastic Steel 5 Minute Putty Specific Volume - 12.2 in (3)/lb
Devcon Plastic Steel 5 Minute Putty Cured Shrinkage - 0.0006 in./in
Devcon Plastic Steel 5 Minute Putty Specific Gravity - 1.96 gm/cc
Devcon Plastic Steel 5 Minute Putty Temperature Resistance - Dry: 200degree centigrade F
Devcon Plastic Steel 5 Minute Putty Coverage/lb - 49 sq.in. / lb.½
Devcon Plastic Steel 5 Minute Putty Cured Hardness - 85D
Devcon Plastic Steel 5 Minute Putty Dielectric - 30
Devcon Plastic Steel 5 Minute Putty Strength - volts/mils
Devcon Plastic Steel 5 Minute Putty Dielectric Constant - 35
Devcon Plastic Steel 5 Minute Putty Adhesive Tensile Shear - 2,026 psi
Devcon Plastic Steel 5 Minute Putty Compressive Strength - 10,400 psi
Devcon Plastic Steel 5 Minute Putty Modulus Degrees Faren
Devcon Plastic Steel 5 Minute Putty Height Elasticity - 7.5 psi x 10(5) in
Devcon Plastic Steel 5 Minute Putty Flexural Strength - 7,680 psi
Devcon Plastic Steel 5 Minute Putty Coefficient Thermal Expansion - 34 [(in.) x (in). x F)] x 10(-6)
Devcon Plastic Steel 5 Minute Putty Thermal - 2.65 [(cal x Conductivity cm) / (sec x cm(2) x C)] x 10 (-3)
Devcon Plastic Steel 5 Minute Putty Cure Time - 1 hrs
Devcon Plastic Steel 5 Minute Putty Recoat Time - 15-30 min
Devcon Plastic Steel 5 Minute Putty Mixed Viscosity - Putty
Tests Condected
Cure Shrinkage ASTM D 2566
Adhesive Tensile Shear ASTM D 1002
Dielectric Strength, volts/mil ASTM D 149
Co ef. of Thermal Expansion ASTM D 696
Flexural Strength ASTM D 790
Thermal Conductivity ASTM C 177
Compressive Strength ASTM D 695
Cured Hardness Shore D ASTM D 2240
Dielectric Constant ASTM D 150
Modulus Elasticity ASTM D 638
Surface Preparation: 1. Thoroughly clean the surface with Devcon Cleaner Blend 300 to remove all oil, grease, and dirt.