| Product Code | HFA Series |
|---|---|
| BrandName | Hongtek |
| Country of Origin | China |
| Keywords | high flow filters, pleated high flow filters, high flow filter cartridges, high flow pleated cartridges,High Flow Pleated Filter Cartridges, High Flow Pleated Filters, High Flow Filters, High Flow Filter Cartridges, High Flow Water Filters, Water filter elements, Pleated filter element, Pleated filter cartridges, Pleated water filter cartridges, Pleated water filters, High flow cartridges, Pleated high flow filter |
| Price | USD 41.69 Piece |
| Min. Order | 2 Piece |
| Payment Terms | L/C,T/T |
| Send Inquiry | |
HFA Series Pleated High Flow Cartridges Replace to Pall Ultipleat High Flow Filters
Description
The large diameter geometrical design of polypropylene pleated high flow filter cartridges enlarge surface filtration area, high dirt holding capacity to save the quantities of filter cartridges, high flow rate when filtration efficiency exceed 99%. high flow filter cartridges are wide range of chemical compatibility and applications, the ideal option for industrial high flow water filtration system to protect RO membrane.
Feature
1. Gradient pore structure of high flow filter cartridges provide layered filter function
2. Outer hard cage can withstand higher pressure than Pall Ultipleat high flow filters made by soft netting
3. High flow filter cartridges are high filtration efficiency, lower waste disposal costs and more economical
4. Inside to outside filtration pattern of High flow filter cartridges ensure holding all impurities stay inside the pleated media
5. The highest flow rate of High flow filter cartridges could get 110 M3/H and Beta 5000 rated ( efficiency)
6. The reduction of filtration system space maximum 50% and lower maintenance costs when use High flow filter cartridges
7. Materials meet FDA requirements, wide chemical compatibility, no resins, binders, or adhesives and 100% integrity testing
| Filter Media | Polypropylene(PP) Pleated |
| Length | 20"(508mm), 40"(1016mm), 60"(1524mm) |
| Outside Diameter | 6 inch (152mm) |
| Inside Diameter | |
| Filtration Rating | 1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm |
| Support/Drainage | Polypropylene (PP) |
| End Cap Material | Glass fiber reinforced Polypropylene (PP) |
| Outside | Rigid Hard Cage, Stainless Steel(special) |
| Seal Material | EPDM, Buna-N, Viton |
Operation Data for HFA Series Pall Ultipleat Replacement Pleated High Flow Filter Cartridges
| Maximum Operating Temperature | 180°F @ 20 psid (82°C @ bar) |
| 160°F @ 30 psid (71°C @ bar) | |
| 77°F @ 50 psid (25°C @ bar) | |
| Suggested Maximum Flow Of Water | 20inch length: 660 LPM |
| 40inch length: 1,300 LPM | |
| 60inch length: 1,900 LPM | |
| Liquid Flow Direction | Inside to outside |
| Typical Surface Area | ㎡ per 20" filter cartridge |
| 7㎡ per 40" filter cartridge | |
| ㎡ per 60" filter cartridge | |
| Recommend Change out Differential Pressure | Bar at 20 ℃ |
Pressure-Drop Rate for 40" HFA Series Pall Ultipleat Replacement Pleated High Flow Filter Cartridges
| Design for High Flow Filter Cartridges | ||
|
● The 3D high-end design show the advantages of structure HF Series pleated high flow filter cartridges ● The complete design is very important to research, development and manufacture of high flow pleated cartridges ● Powerful technical team can help to customize the special pleated high flow filters to replace Pall Ultipleat high flow filters ● Pay high attention to every detail, better design to create higher quality of high flow filter cartridges for water filtration system |
||
| Installation for High Flow Filter Cartridges | ||
|
● Inside to outside flow pattern and no bypass ● Replace to Pall Ultipleat high flow filter directly ● Outside hard cage to make stable structure and reliably good sealing ● High flow rate & low delta pressure, absolute rated filters are designed ● Smaller and more economical filter systems, lower maintenance and waste disposal costs |
||
| HFA | Material | Length | Filtration Rating |
O-ring Material |
Inside (selective) |
|
HFA Series Pall Ultipleat Replacement Pleated High Flow Filter Cartridges |
P = PP Pleated | 20 = 20"(508mm) | 1 = 1μm | E = EPDM | C = Central PP core |
| 2 = 2μm | |||||
| 3 = 3μm | |||||
| 40 = 40"(1016mm) | 5 = 5μm | B = Buna-N | |||
| 10 = 10μm | |||||
| 20 = 20μm | |||||
| 60 = 60"(1524mm) | 40 = 40μm | V = Viton | |||
| 50 = 50μm | |||||
| 70 = 70μm | |||||
| 100 = 100μm |
For Example:
HFA-P-40-5-E
HFA Series Pall Ultipleat Replacement Pleated High Flow Filter Cartridges - Material: Polypropylene - Length = 40" - Filtration Rating = 5μm - O-ring Material = EPDM
Special specifications high flow pleated cartridges can be customized, such as central PP core, special end caps or Stainless Steel outside cage etc.