Enable your multi-type-small-lot production with the CF2.
The CF2 Series flat bed cutting plotter capable of cutting various kinds of media with high accuracy without dies. Out of a total of 30 kinds of line-up, you can choose the one best suited for your needs. By cutting the printed media, you may produce high value-added products on demand required. Begin multi-type small-lot production with unprecedented high quality.
|
CF2-0912** |
CF2-1215** |
CF2-1218** |
Effective plotting area |
X (Sensor model) |
1,170mm() |
1,470mm() |
1,770mm() |
X (No sensor model) |
1,200mm() |
1,500mm() |
1,800mm() |
Y |
900mm() |
1,200mm() |
Motorization |
X,Y,Z,θ 4 axes DC software servo |
Maximum plotting speed |
50cm() / s |
Maximum acceleration |
|
Mechanical resolution |
X:() Y:() θ: |
Command resolution |
() / () (changeable from operation panel) |
Static accuracy *1 |
Repetition accuracy |
±() |
Distance accuracy |
±() or ± whichever is greater |
Origin repetition accuracy |
±() |
Maximum thickness of set work |
T / TD:25mm(1″) RT / RC:20mm() |
Work fixation |
Air suction by a blower |
Receiver buffer size |
1MB |
Command |
MGL-IIc3(Support MGL-IIc) *2 |
Interface |
RS-232C |
Dimension |
Width |
1,760mm() or less |
2060mm() or less |
2360mm() or less |
Depth |
1,600mm() or less |
1900mm() or less |
Height |
1,100mm() or less |
Weight |
140kg(308lbs) |
165kg(364lbs) |
180kg(397lbs) |
Operation environment |
Temperaturet : 5-40ºC Humidityt : 35-75%(Rh)No condensation |
Power requirement |
Main Unitt : 50/60Hz AC100/120/220/240V(tap changing) Blowert : Stated separately |
Power consumption |
Main Unit : 300VA Blowert : Stated separately |
★:Possible to cut with standard accessories
●:Possible to cut with the use of optional items
|
T |
TF |
RT |
TD |
RC |
Corrugated fiberboard(E to B corrugation)* |
|
|
|
★ |
★ |
Corrugated fiberboard(AB corrugation)* |
|
|
|
|
★ |
Coated board for packaging* |
|
|
|
★ |
★ |
Vinyl chloride for clear package* |
|
|
|
★ |
★ |
Plastic corrugated fiberboard |
|
|
|
★ |
★ |
Vinyl chloride sheet for signboard |
★ |
★ |
★ |
★ |
★ |
Soft vinyl chloride( to 10mm) |
● |
● |
|
|
|
Reflecting sheet |
★ |
★ |
★ |
★ |
★ |
Sand-blast rubber |
★ |
★ |
★ |
★ |
★ |
Industrial sheet rubber(3mm or less) |
★ |
★ |
★ |
★ |
★ |
Industrial sheet rubber( to 10 mm) |
● |
● |
|
|
|
Pattern Happort |
★ |
★ |
★ |
★ |
★ |
Teflon( to ) |
|
★ |
|
★ |
★ |
Resin belt. ( or less) |
★ |
★ |
|
|
|
Various foam(20mm or less) |
|
|
★ |
|
|
Note) As the property of the media may vary depending on the material manufacturers, the above data is just a guide. Make sure to perform your own testing.
Note) *shows material to which drawing of the ruled line is possible.
CF2-0912T |
Effective cutting area: 900 x 1,200 mm ( x ) |
CF2-0912TF |
Effective cutting area: 900 x 1,200 mm ( x ) |
CF2-0912RT |
Effective cutting area: 900 x 1,200 mm ( x ) |
CF2-0912TD |
Effective cutting area: 900 x 1,200 mm ( x ) |
CF2-0912RC |
Effective cutting area: 900 x 1,200 mm ( x ) |
CF2-1215T |
Effective cutting area: 1,200 x 1,500 mm ( x ) |
CF2-1215TF |
Effective cutting area: 1,200 x 1,500 mm ( x ) |
CF2-1215RT |
Effective cutting area: 1,200 x 1,500 mm ( x ) |
CF2-1215TD |
Effective cutting area: 1,200 x 1,500 mm ( x ) |
CF2-1215RC |
Effective cutting area: 1,200 x 1,500 mm ( x ) |
CF2-1218T |
Effective cutting area: 1,200 x 1,800 mm ( x ) |
CF2-1218TF |
Effective cutting area: 1,200 x 1,800 mm ( x ) |
CF2-1218RT |
Effective cutting area: 1,200 x 1,800 mm ( x ) |
CF2-1218TD |
Effective cutting area: 1,200 x 1,800 mm ( x ) |
CF2-1218RC |
Effective cutting area: 1,200 x 1,800 mm ( x ) |