Hongtek Filtration Co., Ltd.

Description

PP Pleated Cartridge Filters are made of Polypropylene fiber media. PP pleated cartridge filters provide excellent filtration efficiency and chemical compatibility across a wide range of liquid filtration process constitution of nominal PP pleated filter cartridges adopt thermal welding techniques to seal all components, so no side leakage and optimizing PP pleated cartridge 100% integrity. PP pleated filter cartridges have large surface area that allow for greater system flow rate and higher dirt holding capacity than depth filters. PP pleated cartridges are widely used in prefiltration field requiring high purity.

Feature

1. PP pleated cartridge filters are manufactured in clean room and high cleaning environment
2. PP pleated cartridges are low pressure drop, high capacity of impurities and long service life
3. Polypropylene pleated cartridges are strict election materials which according to FDA standard
4. Ulti-layers structure, good filtration efficiency and consistent of performance for broad application range

components of PP pleated filters are assembled in fully sealed condition by thermal bond, free of binder

Applications

1. Etchants
2. Chemicals
3. Cosmetics
4. Oil industry
5. Semiconductor
6. Food & Beverage
7. Medicine Filtering
8. Paints and Coatings
9. Prefiltration for RO/DI

Specification

Filter Media	Polypropylene
Length	5", ", ", 10", 20", 30", 40"
Outside Diameter	"(70mm)
Filtration Rating	, , , , , 1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 30μm, 40μm, 50μm, 60μm
Core	Polypropylene
Support/Drainage	Polypropylene
Gasket/O-ring	Silicone, EPDM, Viton, NBR, Teflon encapsulated Viton
End Cap/Cage	Polypropylene
End Cap Type	DOE, 222/Flat, 222/Fin, 226/Flat, 226/Fin, 215/Flat, 215/Fin

Performance

Operation Data for PCF Series Nominal PP Pleated Cartridge Filters

Maximum Operating Temperature	80℃(176℉)
Max. Differential Pressure	bar at 20℃ (70 psi at 68℉)
	bar at 50℃ (50 psi at 122℉)
	bar at 80℃ (20 psi at 176℉)
Maximum reverse pressure	40 psid @ 70°F ( bar @ 21°C)
Recommended Change Out Differential Pressure	bar (35 psid)
Sterilization Temperature Time	121˚C (250˚F) for 30 minutes at bar (14 psi)

Pressure Drop Rate for 10" PP Pleated Cartridge Filters

Tech Support

Electron Microscopic Photo of PP Membrane

 

3D Drawing for PP Pleated Cartridge Filters
				● Thermal welding techniques ensure PP pleated filter cartridges no side leakage ● Ulti-layers pleated, low pressure drop, high capacity of impurities and long service life ● 100% integrity tested, ineer core and outside cage strengthen capacity of high flow pressure ● Large surface area that allow for high flow rate and higher dirt holding capacity than normal depth filters

Installation Example for PP Pleated Cartridge Filters
				● Manufactured in continuous lengths up to 40 inches and vrious of filtration ratings ● Wide range of chemical compatibility used in prefiltration fields with high flow rate ● Special PP pleated cartridge filters can be made, such as special length and . inner core ● Various of end caps fit for standard filter housings, easy to install help to save some manpower and time

 

End Caps of PP Pleated Cartridge Filters

Order Information

PCF	Length	Micron Rating	End Cap	Gasket/O-ring	Adders
PCF Series Nominal PP Pleated Cartridge Filters	5 = 5"	=	A = Double Open End (DOE)	S = Silicone	K = Thicker PP Cage
		=
	= "	=	B = 222/Flat(SOE)
		=		E = EPDM
	= "	=	C = 222/Fin(SOE)
		1 = 1μm			I = Stainless Steel Insert End Cap
	10 = 10"	2 = 2μm	D = 226//Flat(SOE)	N = NBR
		3 = 3μm
	20 = 20"	5 = 5μm	F = 226/Fin(SOE)
		10 = 10μm		V = Viton
	30 = 30"	20 = 20μm	G = 215/Flat(SOE)		S = Stainless Steel Core
		30 = 30μm
	40 =40"	40 = 40μm	H = 215/Fin(SOE)	T = Teflon Encapsulated Viton
		50 = 50μm
		60 = 60μm

For Example:

PCF-10-1-B-S

PCF Series Nominal PP Pleated Cartridge Filters - 10" - 1μm - 222/Flat(SOE) - Silicone O-ring