MODEL |
GX-300 |
GX-400 |
GX-500 |
GX-640 |
Cutting method |
Media-movement method |
Driving method |
Digital control servo motor |
Friction feed/Digital control servo motor |
Maximum cutting area |
29 x 984-1/8″ (737 x 24,998mm) |
39 x 984-1/8″ (1000 x 24,998mm) |
47 x 984-1/8″ (1195 x 24,998mm) |
Width: 65″ (1651 mm) |
Acceptable media width |
2 to 36″ (50 to 915mm) |
3-1/2 to 46″ (90 to 1178mm) |
3-1/2 to 54″ (90 to 1372mm) |
5-1/16″ to (130 mm to 1842 mm) |
Maximum cutting speed |
During cutting: 33ips (850mm/sec.) [in all directions] During tool-up: 47 ips (1202mm/sec) [in 45º direction] |
During cutting: (850 mm/sec) (in all directions) During tool-up: 47″/sec (1202 mm/sec) |
Cutting force |
20 to 350 gf |
1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > |
Mechanical resolution |
() |
( mm/step) |
Software resolution |
() |
( mm/step) |
Distance accuracy |
Error of less than ± of distance traveled, or (), whichever is greater |
Error of less than of distance traveled, or ( mm), which is greater |
Repetition accuracy |
or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only) For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) |
( mm) or less |
Interface |
Serial (RS-232C compatible), USB (Rev. ) |
Serial (RS-232C-compatible), USB (Rev ) |
Buffer size |
8MB (2MB for re-plot buffer) |
2 MB (buffer size: 8 MB) |
Power supply |
AC 100V to 240V +/- 10% 50/60Hz |
AC 100V to 240V =/- 10% 50/60Hz A |
AC 100V to 240V ±10% 50/60Hz |
Power consumption |
Approx. 95W |
Approx. 100WApprox. 100W |
Acoustic noise level |
Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) |
|
Dimensions with stand |
45-1/16(W) x 28-5/8(D) x 43-13/16″(H) 1144(W) x 727(D) x 1113mm (H) |
55-3/8(W) x 28-5/8(D) x 43-13/16″(H) 1407(W) x 727(D) x 1113mm(H) |
63-1/16(W) x 28-5/8(D) x 43-13/16(H) 1602(W) x 727(D) x 1113mm (H) |
83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) |
Weight with stand |
97lb. (44 kg) |
. (51 kg) |
lb. (55 kg) |
14 lb (64 kg) |
Operating temperature |
41 to 104F (5 to 40C) |
Operating humidity |
35 to 80% (non-condensing) |
Standard accessories |
Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual |
Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual |