Qinhuangdao Yuanchen Hardware Co.,Ltd.

Related Standard:

• EN ISO 12543 - 4 Glass in building -Laminated glass and laminated safety glass - Part 4: Test methods for durability – Clause 5 High-temperature test
• AS/NZS 2208 Safety glazing materials in buildings – Appendix F Boil Test
• GB Safety glazing materials in building Part 3:Laminated glass – Clause Heat resistance test
• ANSI Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause – ( 1 ) Boil Test

Data：

• Power: 220V 50Hz 3Kw (Customized)
• Outside Size: 430mm*290mm*575 mm
• Inner Size: 400mm*255mm*480mm
• Rack：340mm*235mm*350mm
• At most 6 samples with 300mm*300mm

Scope:

• Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling

Principle:

• Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and others defects

Apparatus:

• The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.

Samples:

• Three specimen of size 300mm*300mm manufacture in a manner identical with impact test specimens and of like thickness shall be tested.
• These specimens may be cut from production samples of the size and thickness submitted for impact testing.
• For heat strengthened or toughened laminated glass, test specimen may be cut from a similar original sheet of annealed laminated glass

Procedure:

• Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C±3°C for 3 min
• Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h
• Remove the specimens and examine for the bubbles and others defects