CRC Engine Flush
1.GENERAL DESCRIPTION
Fast motor flush.
A blend of highly active polar and non-polar solvents, paraffinic oil, dispersant and anti-wear additives.
CRC Engine Flush cleans the engine's interior of sludge, gum, rust and varnish prior to oil change.
2. FEATURES
Dissolves deposits from pistons and rings and frees sticky valves and lifters.
Holds the deposits in suspension until they are drained with the oil.
Contains anti-wear, anti-corrosion and anti-oxidation additives protecting the engine whilst flushing it.
Helps to restore compression.
Improves performance, fuel economy and engine life.
Non-acid, non-alkaline and non-corrosive.
Harmless to all metal parts.
Can be used in diesel as well as in gasoline engines.
Compatible with all commonly used types of oil.
3. APPLICATIONS
Motor bikes
Cars
Trucks
Busses
Boats
Farm and garden equipment
Stationary combustion engines
4. DIRECTIONS
Shake before use.
Pour content of can into crankcase, whilst engine is warm
Run engine for about 10 minutes at increased idle, 1500 rpm., then switch off and drain out old oil.
Replace oil filter, as required.
Refill with clean engine oil.
A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
5. TYPICAL(*) PRODUCT DATAAppearance : amber liquid
-
Specific gravity @ 20° C : 0.83
Pour point : <-20°C
Flash point (open cup) : 65°C
Solvent blend properties
- Distillation range : 170-250°C
CRC AEROSOL, ELECTRICAL MAINTENANCE Spray, CRC 2-26, CRC CO CONTACT CLEANER, CRC LECTRA CLEAN, CRC N F Precision, ONLINE CONTACT CLEANER, CRC URETHANE ISOLATION RED, CRC PLASTIC 70, CRC BATTERY TERMINAL COATING, CRC 3-36, CRC 5-56, CRC GASKET REMOVER, CRC FAST DRY DEGREASER, GALVABRITE, CRC RUST REMOVER, CRC COPPER PASTE, CRC METAL FREE PASTE, CRC HAND CLEANER, CRC ANTI FRICTIONAL TEFLON COATING, CRC FREEZE 75, CRC SP-400, CRC SP - 350
