CRC Gasket Remover Spray
1. GENERAL DESCRIPTION of CRC Gasket Remover Spray
Gaskets, paints and adhesives stripper.
CRC Gasket Remover is a blend of non-chlorinated powerful solvents, formulated for the easy removal of gasket cement, paints, adhesives and sealants. It helps to protect equipment surfaces by eliminating damage caused by excessive scraping.
2. FEATURES of CRC Gasket Remover Spray
High penetrating power
Controlled evaporation
Clings to vertical surfaces, ideal for fixed industrial equipment.
Softens and eases removal of conventional and formed in-place gaskets, gasket cements and sealants.
Excellent stripper for paints, varnishes and lacquers
Loosens carbon deposits
Dissolves tar, greases, dried oils, adhesives, resinous deposits, etc.
Avoids accidental and costly damage caused by excessive scraping.
3. APPLICATIONS CRC Gasket Remover Spray
Removal of Gasket residues on cylinder heads,crank cases, gear boxes, water pump flanges,
Carbon deposits on valve seats, cylinder heads, metal engine components,
Paints and coatings on metals, stone, hard surfaces,
Mastics, Putties, Sealants, Adhesives
4. DIRECTIONS for use of CRC Gasket Remover Spray
Mask painted surfaces from over spray. Wear eye protection and non-porous (rubber) gloves.
Shake well or stir before application and apply a thick film on area to be treated.
Allow product to work for 10-20 minutes. Remove residues with a rag, stiff bristled brush or putty knife. Repeat application if necessary.
Clean treated surface with a solvent cleaner (CRC Fast Dry Degreaser, CRC Industrial Degreaser, ...) to remove waxy product film.
Test before use on plastics or rubber. Do not use on energised equipment.
Use only in well ventilated areas. A safety data sheet (MSDS) according EU93/112 is available for all CRC products.
5. TYPICAL(*) PRODUCT DATA
Appearance : viscous opaque liquid
Specific gravity (@ 20°C) : 0,92
Boiling range (solvents) : 40-200°C
Freezing point : < -20°C
Flash point (closed cup) : < -0°C
pH : neutral
Viscosity : 700-1500 mPa.s (thixotropic)
Kauri-Butanol value (solvents) : > 120
Vapour density (solvents, vs. air = 1) : > 2
Non-volatile content : 1,5% wt