1. GENERAL DESCRIPTION
A universal assembly spray paste.
Special sprayable paste which contains a combination of the extremely pressure-resistant solid lubricants molybdenum disulphide (MoS2 ) and graphite, stabilised in adhesive mineral oil.
2. FEATURES
-
High load-carrying capacity reducing the appearance of the grooves when inserting components
-
Water-repellent
-
Good corrosion protection
-
Oxidation resistant
-
High thermal stability (up to 650°C)
-
Very good adhesion
-
Prevents seizing
-
Prevents fretting corrosion, scuffing and stick-slip
-
Constant ratio of starting torque to initial tension
-
Smoothes out rough surfaces
3. APPLICATIONS
-
Mounting of longitudinal press fits, eg. for bolts and bearing seats
-
Assembly of seals and screws
-
Surface treatment of rolling and sliding bearings to improve the running-in and to extend lifetime
-
Lubrication of guides and joints with very slow sliding movement
-
Bearing lubricant for wheel bearings and kiln carts
-
Lubrication of all types of open gears
-
Running-in lubricant of new gear wheels
4. DIRECTIONS
-
Shake can very well till agitator ball is free
-
Apply a thin, even layer
-
As running-in for rolling and sliding bearings, polish the applied product with a soft cloth. Remove any excess.
-
As running-in for new gear wheels : let the gears operate at a low speed and with a low load (eg. moving by hand) without the operating lubricant.Then fill the system with the lubricant.
5. TYPICAL(*) PRODUCT DATA
Temperature range : -30°C to +650°C
Load carrying capacity
(four-ball welding load) (DIN 51350) : 7.000 N
Flash point of aerosol : < 0°C