1. GENERAL DESCRIPTION
Water-based gas leak detector.
A water-based formulation, containing surface-active and anti-corrosion agents and stabilisers. Leak Finder detects and locates quickly and reliably gas leaks and pressure losses in pipes, pressurised systems, etc. by forming highly visible bubbles when applied over any leak. Contributes to protect the environment by locating emissions of toxic and/or polluting gases.
2. FEATURES
Stable foam formulation
Meets the requirement of DIN 30657
DVGW (Deutscher Verein des Gas und Wasserfaches) registration number NG 5170 AS 0069
Can be used for almost all types of gases :
- natural gas - oxygen - compressed air
- propane - LPG - refrigerants
- butane - nitrogen - ...
- acetylene - carbon dioxide
Meets the requirements of MIL-L-25567 of oxygen compatibility. Testing of oxygen systems must be done carefully,
and product residues should not be allowed to build up
Non-staining, non-corrosive, stable and safe
Safe on plastics, steel, aluminium, copper, etc.
Aerosols are equipped with the 360° (upside-down) spray valve and handy large button for added convenience
Aerosols are pressurised with neutral N2O propellant, giving an active product content of over 98%
3. APPLICATIONS
Pipes
Valves
Screw-connections
Welding seams
Compressors
Refrigeration units, air conditioning
Transfer of liquified gases
Gas pressure testing of pressurised cables
LPG fuelled engines
Exhausts
4. DIRECTIONS
Spray evenly over area to be tested.
Bubbles will appear at the precise location of the leak.
Product is water-based and should not come into contact with energised electrical equipment.
If necessary (e.g. for oxygen systems) product residues can be washed away with water.
A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
5. TYPICAL(*) PRODUCT DATA (without propellant)
Appearance : colourless liquid
Specific gravity (@ 20°C) : 1,00 ± 0,01
Flash point : not flammable
Boiling point : 100°C
Freezing point : 0°C (**)
pH : 8,5
Surface tension (@ 20°C) : 28 mN/m
Foam stability (DIN 53902) : 90%
Corrosion test (DIN 30657) : not corrosive
CRC AEROSOL, ELECTRICAL MAINTENANCE Spray, CRC 2-26, CRC CO CONTACT CLEANER, CRC LECTRA CLEAN, CRC N F Precision, ONLINE CONTACT CLEANER, CRC URETHANE ISOLATION RED, CRC PLASTIC 70, CRC BATTERY TERMINAL COATING, CRC 3-36, CRC 5-56, CRC GASKET REMOVER, CRC FAST DRY DEGREASER, GALVABRITE, CRC RUST REMOVER, CRC COPPER PASTE, CRC METAL FREE PASTE, CRC HAND CLEANER, CRC ANTI FRICTIONAL TEFLON COATING, CRC FREEZE 75, CRC SP-400, CRC SP - 350
