Function: Measuring dew point meter of insulating glass
Related Standard:
ISO 20492 Glass in buildings — Insulating glass
GB / T 11944 Insulating glass
Techinical data:
Measuring range: -80°C ~ 100°C
Tube height: 300mm
Tube diameter: ø50mm
Accuracy: ≤1℃
Test environment: temperature: 23 °C ± 2 °C; relative humidity: 30% to 75% RH
Features:
1）Small size, easy to carry; probe and the refrigeration unit can be completely separated, easy to operate；
2）The digital thermometer has good stability and high measurement accuracy.
3）The measurement range can meet the heat resistance test requirements of laminated glass at the same time.
Attention:
1）The instrument is precise, handle lightly when in use, avoid knocking and falling;
2）Clean the measuring tube after use, keep the probe dry and clean, and keep it in the original package when not in use.
3）Close the switch in time after using the dew point meter, When not in use for a long time, the batteries of the digital display meter should be removed and placed.
Reference standard:
BS EN 12600:2002
Glass in building – Pendulum test – Impact test method and classification for flat glass
Technical Data:
Weight: 50 kg ± 0,1 kg
Tyre pressure: ±
Tyre Type: 4PR
Sample size: 876 mm ± 2 mm * 1938 mm ± 2 mm
Inside the sample frame: 847 mm ± 5 mm * 1910 mm ± 5 mm
Impact frame footprint: 1300 mm*3900 mm*3700 mm
Lifting mode: manual, automatic optional
Impact body release mode: manual, automatic optional
Pendulum shock device for Impact test of elevator landing door, glass door and car wall
Related Standard:
GB 7588-2003 Safety rules for the construction and installation of electric lifts
EN 81-1 Safety rules for the construction and installation of lifts – Part 1: Electric lifts
Soft pendulum shock device
Height: 330mm ± 15mm
Maximum diameter: 240mm±15mm
Weight: 45kg ±
Material: leather bag
Filler: diameter ± 1mm lead sand
Hard pendulum shock device
Height: 330± 15mm
Max diameter: 240±10mm
Weight: 10kg ±
Material: according to ISO standard
Filler: ±
Function: Measurement of arcuate form and wave form of tempered glass
Related standard:
1) GB Safety glazing materials in building
– Part 2: Tempered glass
Clause Camber measuring
2) AS NZS 2208 Safety glazing materials in buildings
Clause Flatness requirements
Technical Data:
Resolution:
Measuring Span: 30mm-1000 mm ( Customizable)
Working Temperature: 0~+40°C
Working Humidity: ≤80%
We provide exquisite packaging customized for customers.
Instruction:
Adjust the measurement and set up to track the maximum data. Adjust the span of the support block according to request.
Adjust the position of measuring head, to ensure that the measuring head is beyond 2mm-3mm of the plane of three support feet.
Gently stick the surface of the glass to ensure that three supporting feet are able to touch the glass.
Slide the measure location and read the data.
Product features:
Continuous measurement and monitoring of the flatness of the glass, data display and recorded.
Simple operation, fast measurement, low cost, widely used in the flatness measurement of glass.
The specifications of the equipment are various; the measuring span (300mm, 500mm, 800mm, 1000mm) can be customized according to customers’ requirements.
Automotive Stamping Parts 1:
Size: 47mm*16mm
Thickness: 2mm
Material: 304 stainless steel
Weight: 5g
Processing: laser cutting
Automotive Stamping Parts 2:
Size: 88mm*19mm
Thickness: 2mm
Material: 304 stainless steel
Weight: 15g
Processing: laser cutting
Automotive Stamping Parts 3:
Size: 40mm*40mm
Thickness: 3mm
Material: carbon steel
Weight: 28g
Processing: laser cutting
Automotive Stamping Parts 4:
Size: 81mm*46mm*25mm
Thickness: 1mm
Material: galvanized plate
Weight: 35g
Processing: laser cutting, bending
Automotive Engine Piping Accessories:
Diameter: 30mm
Height: 80mm
Thickness:
Material: iron
Weight: 95g
Processing: hot pressing
Automotive Engine Bracket:
Size: 385mm*10mm
Thickness: 20mm
Material: 45# steel
Weight:
Processing: machining center
Stainless steel bracket
Welded mirror bracket
Stainless steel sheet metal processing custom bracket
Size: 67 mm*48 mm*50 mm
Material: Stainless steel
Surface: mirror
Weight: kg
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Reference Standard: JIS A 6601 and JG/T 342
Anti- hard heavy objects impact performance test:
Impactor: Solid steel ball with hook
Mass: 1040g±10g , diameter:
Anti- soft heavy objects impact performance test:
Impactor: shot bag
Data:
Weight: 45kg ±
Height: 330mm ± 13mm
Max diameter: 250mm
Structure: leather bag filled with lead shot,wrapped with fiberglass tape.
Leather thickness:
Lead sand size:
Related Standard:
ISO 3537 Road vehicles –Safety glazing materials — Mechanical tests – Clause 10 Head-form test
Principle: Assessment of the minimum strength and cohesion of the safety glazing material under impact from a blunt, bulky object. If required, tests can be performed on whole windscreens.
Application:
The purpose of this test is to verify the compliance of glazing with the asking relating to the limitation of injury in the event of impact of the head against the windscreen, laminated glass and glazing of glass-plastic and rigid plastic other than windscreens, together with The double-glazed units used in the side windows.
Techinical Data:
Head-form Weight: 10kg
Head-form Size: 500mm*932mm
Impact height: <
Samples size: 1100mm*500mm
Felt hat: 90g/89mm Thickness:5mm
Frame size: 1376mm*670mm*320mm
Apparatus:
Head-form weight, with a spherical or semi-spherical head made of laminated hard wood covered with replaceable felt and without a cross-beam made of wood. Between the spherical part and the cross-beam, there is a neck-shaped intermediate piece and on the other side of the cross-beam, a mouning rod.
The total mass of the apparatus shall be 10kg±
Supporting fixture:
for testing flat test piece, the fixture is composed of two steel frames, with machined edges, 50mm wide, fitting one over the other and faced with rubber gaskets 3mm±0,5mm thick and 15mm±1mm wide, of hardness 70 IRHD.
The upper frame is pressed against the lower frame by at least eight bolts. The support shall rest on a rigid stand with a sheet of rubber, of hardness 70 IRHD and 3mm±0,5mm thick, placed in between.
Reference standard: ISO 3537 ROAD VEHICLES – SAFETY GLAZING MATERIALS —MECHANICAL TESTS
Test purpose: Assessment of the minimum strength and cohesion of the safety glazing material under impact from a blunt, bulky object.
Supporting fixturez: composed of two steel frames, with machined edges, 50mm wide, fitting one over the other and faced with rubber gaskets, the upper frame is pressed against the lower frame by at least eight bolts.
echnical Data:
Size: 1400mm*666mm*320mm
Sample: 1100mm * 500mm
Test height: less than or equal to m
Rubber pad: 15mm wide, 3mm thick, of hardness 70 Shore A
Function: Impactor for Soft Heavy Body Impact Test of Doorsets
Reference Standard:
ISO 8270:1985 Doorsets — Soft heavy body impact test
GB/T 14155-2008 Doorsets — Soft heavy body impact test
Technical Data:
Height: About 600mm
Diameter: About 350mm
Filler: 2mm Sand, Apparent density 1500kg/m³
Leather Bag
Total weight: 30kg
Standard Name:
Insulating glass used on multiple units
Reference Standard: NF F 01-492 Clause and
Technical Data:
Weight: 50kg
Height: 600mm
Max Diameter of the Soft Body: 400mm
Hardened Glass Diameter: 3mm
Diameter of the Bag Top: 80mm
Diameter of the Bottom Leather Sewn Crown: 120mm
Detailed Description:
A common bag for this procedure could be, but not necessarily, assembled as follows:
Model hardware accessories, hardware hook connectors, stainless steel hooks
parameter:
Card board:
Stainless steel 201
Diameter: 585 mm
Thickness: 2 mm
Pin: Stainless steel 304
Diameter: 10 mm
Length: 120 mm
Surface: Industrial surface
Specifications: diameter 85 mm*120 mm
Tolerance:
Weight: 245 g
Process: blanking, stamping, bending, welding, assembly
Uses: window model body and limbs connection
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm – 16 mm Stainless Steel: 1 mm – 8 mm Aluminum Alloy: 1 mm – 8 mm Brass: 1 mm – 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Professional Manufacturer OEM/ODM
Sheet Metal Fabrication/Nonstandard Metal Parts/Safety Glass Test Equipment
Function: Pipe clamp for protective fence of mechanical equipment
Clamps and fixed feet for safety fences such as workshop isolation and equipment protective.
Clamp with hinge
Material: Carbon steel Q235
Thickness: 2mm
Size: 75mm * 55mm * 45mm
Weight: 205g
Process: blanking, stamping, deep drawing, bending, galvanizing
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm – 16 mm Stainless Steel: 1 mm – 8 mm Aluminum Alloy: 1 mm – 8 mm Brass: 1 mm – 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Professional Manufacturer OEM/ODM
Sheet Metal Fabrication/Nonstandard Metal Parts/Safety Glass Test Equipment
Material: Carbon Steel Q235
Pressure plate thickness:
Thickness of square steel: 10mm
Size: 140mm*25mm*20mm (5 holes)
Tolerance:
Surface: galvanizing
Weight: 355g
Process: Blanking, stamping, galvanizing
Laser cutting processing, sheet metal fabrication, stamping, punching, bending and forming.
Processing of materials provided by clients, processing with supplied drawings, customized processing, Non-standard processing/cold-rolled sheet, galvanized sheet, aluminium alloy sheet, stainless steel sheet.
Stamping mould, punching mould, bending mould, forming mould, blanking mould, drawing mould, cutting mould.
Cable hook, metal spring piece, model hook, non-standard bracket, non-standard hinge, non-standard guardrail connection gaskets, non-standard pipe clamp.
Mechanical equipment accessories, building hardware accessories, electronic hardware accessories, automotive stamping parts, medical equipment sheet metal parts, metal crafts, home hardware, decorative hardware.
Material: Carbon Steel
Size: 680mm*50mm
Thickness: 5mm
Punching Hook for Suspension and Protection of Power Cables Underground Coal Mines
All kinds of Cables are Hung Up in Mine Metal Cable Hooks
Single Row, Double Row, Customized
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm – 16 mm Stainless Steel: 1 mm – 8 mm Aluminum Alloy: 1 mm – 8 mm Brass: 1 mm – 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Professional Manufacturer OEM/ODM
Sheet Metal Fabrication/Nonstandard Metal Parts/Safety Glass Test Equipment
Application: Power Equipment, Electronic Appliances, Instruments
Material: Stainless Steel 304
Thickness:
Size: 60mm*6mm
Tolerance:
Weight:
Process: Blanking, Punching, Forming
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm – 16 mm Stainless Steel: 1 mm – 8 mm Aluminum Alloy: 1 mm – 8 mm Brass: 1 mm – 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Professional Manufacturer OEM/ODM
Sheet Metal Fabrication/Nonstandard Metal Parts/Safety Glass Test Equipment
Valve gasket
Metal gasket
Carbon steel gasket processing
Carbon steel cutting parts
Material: carbon steel
Thickness: 5mm
Outer diameter: 117mm
Inner diameter: 95mm
Weight: 125g
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Food packaging aluminum cover
Sheet metal drawing processing
Aluminum sheet stamping and drawing
Material: Aluminum plate 3003
Thickness:
Size: Φ35mm*12mm
Tolerance:
Surface: industrial surface
Weight:
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Galvanized sheet hoop
C type clamp pipe clamp
Pipe clamp
Power clamp
Bending mold processing
Function: communication, fire fighting, electric power, water treatment
Material: galvanized sheet
Surface: galvanized
Thickness: 3mm
Size: 161mm*50mm*90mm
Tolerance:
Weight: 280g
Process: Laser cutting, blanking, stamping and forming
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Cable tray support arm bracket
Pipe corridor construction hardware
Custom processing of stamping parts
Material: Q235
Rectangular tube specification: 70 mm*40 mm
Length: 645 mm
Carbon steel plate thickness: 6 mm
Specification: 145 mm*60 mm
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: mm
Laser Cutting:
Carbon Steel: mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm
Max Size: 4000 mm * 2000 mm Positioning: ± mm Repeated: ± mm Maximum Speed: 169 m/min
Materials:
Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper
Moulds:
Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting
Processing:
Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting
Category:
Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips
Applications:
Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative