X8000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and qualit
X8000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and quality control.
X8000 series test modules support up to 8 x 10G COMBO ports and support Cross-chassis synchronizing to provide large-scale protocol emulation, performance test and mass traffic stress test of Layer 2-7 network device.
X8000 series modules support TeleExplorer, TeleAPP to meet different test needs. TeleExplorer is a standard test suite providing L2-7 test functions with powerful and flexible configuration. TeleAPP is a test suite to provide automated test of RFC2544 /2889/3918 with easy-to-use configuration and necessary test report output. X6000 also support TCL and API to meet customized testing requirements.
SPECIFICATIONS
|
Model |
X8004F |
X8002F |
|
Port Number |
4 * 10G |
2 * 10G |
|
Port Rate |
SFP+：10G |
SFP+：10G |
|
Physical |
Status Indicators: Tx/Rx |
|
|
Traffic Generation |
Traffic generating based on port and stream, per port have 256 different streams |
|
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
|
|
Traffic Capture |
Each port provides 512M bits capture buffer |
|
|
Protocol Emulation |
Layer 2-3 Protocol Emulation |
|
|
Integrated IPv4 and IPv6 dual stack |
||
|
Layer 4-7 Protocol Emulation |
||
|
Data |
Each port supports wire-speed traffic generation |
|
|
Support comprehensive multilayer testing though Layer 2 ~ 7 |
||
|
Software Support |
TeleExplorer test system |
|
|
Chassis Available |
TestStorm200 |
|
|
Others |
Easy-to-use graphical user interface |
|
More information please view .
X6000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and qualit
X6000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and quality control.
X6000 series test modules support up to 16 gigabit COMBO ports and support Cross-chassis synchronizing to provide large-scale protocol emulation, performance test and mass traffic stress test of Layer 2-7 network device.
X6000 series modules support TeleExplorer, TeleAPP to meet different test needs. TeleExplorer is a standard test suite providing L2-7 test functions with powerful and flexible configuration. TeleAPP is a test suite to provide automated test of RFC2544 /2889/3918 with easy-to-use configuration and necessary test report output. X6000 also support TCL and API to meet customized testing requirements.
SPECIFICATIONS
|
Model |
X6004D |
X6008D |
X6016D |
|
Port Number |
4 * 1000M |
8 * 1000M |
16* 1000M |
|
Port Rate |
RJ45：10/100/1000M |
RJ45：10/100/1000M |
RJ45：10/100/1000M |
|
Physical |
Status Indicators: Tx/Rx |
||
|
Traffic Generation |
Traffic generating based on port and stream, per port have 64 different streams |
||
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
||
|
Traffic Capture |
Each port provides 256M bits capture buffer |
||
|
Protocol Emulation |
Layer 2-3 Protocol Emulation |
||
|
Integrated IPv4 and IPv6 dual stack |
|||
|
Layer 4-7 Protocol Emulation |
|||
|
Data |
Each port supports wire-speed traffic generation |
||
|
Support comprehensive multilayer testing though Layer 2 ~ 7 |
|||
|
Software Support |
TeleExplorer test system |
||
|
Chassis Available |
TestStorm200 |
||
|
Others |
Easy-to-use graphical user interface |
||
More information please view .
High performance Layer 2-7 unified platform delivering comprehensive Ethernet testing solutions for IP forwarding devices in each stage of R&D, experiment , quality control, performance monitoring and production line test
High performance Layer 2-7 unified platform delivering comprehensive Ethernet testing solutions for IP forwarding devices in each stage of R&D, experiment , quality control, performance monitoring and production line test.
With support of high performance 10G and 10/100/1000M load modules TestStorm can deliver an ideal cost effective L 2-7 protocol testing and emulation solutions.
Full IPv4 and IPv6 protocol stack support, per port simulate tens of millions of interfaces and realistic connections.
KEY FEATURES
Support SFP+, SFP, RJ45 interfaces on 10G and 10/100/1000Mbps
Support Layer 2-7 protocol emulations, provide a realistic network environment
Multi-user login with easy remote access via a network
Daisy chain of chassis with all ports synchronization
Graphical user interface for configuration, data capture and real-time analysis
Support TCL for automating test control
Test suit based on RFC2544, RFC2889 and RFC3918
SPECIFICATIONS
|
Model |
TestStorm200 |
|
Dimension |
3U, 2-slot rack chassis |
|
1000M Ports |
Up to 32 |
|
10G Ports |
Up to 8 |
|
Power |
AC 110~240V |
|
CPU |
Intel dual-core HF CPU |
|
System Control |
Reset button, Power switch |
|
Status Indicators |
Power, Fan, Temperature, Power of slots |
|
Temperature |
0℃-50℃ |
|
Humidity |
0-95%, RH |
|
Load Module Available |
X6000 Series, X8000 Series |
|
Size |
489mm××110mm |
|
Weight |
13kg |
X SERIES LOAD MODULE
High performance and full-specification Ethernet test modules running on TestStorm series platform, providing a full-function Ethernet test with 36-core and more powerful processor, X series load modules deliver a unprecedented performance for complete Layer 2-7 network by the port rate: - X6000 series support 10/100/1000 Mbps per port - X8000 series support 10 Gbps per port.
|
Model |
Port Number |
Port Rate |
Description |
|
X6004D |
8 |
RJ45：10/100/1000M SFP：100/1000M |
4 RJ45 + 4 SFP ports, RJ45/SFP port (Combo), up to 4 port using at the same time |
|
X6008D |
16 |
RJ45：10/100/1000M SFP：100/1000M |
8 RJ45 + 8 SFP ports, RJ45/SFP port (Combo), up to 8 port using at the same time |
|
X6016D |
32 |
RJ45：10/100/1000M SFP：100/1000M |
16 RJ45 + 16 SFP ports, RJ45/SFP port (Combo), up to 16 port using at the same time |
|
X8002F |
2 |
SFP+：10G SFP：1000M |
2 SFP+ ports |
|
X8002F |
4 |
SFP+：10G SFP：1000M |
4 SFP+ ports |
More information please view .
Network Emulation & Performance Testing > >BigTao Series
P9000 Series Test Modules deliver professional network testing functionality on BigTao series test platform with high performance and availability. P9000 series are specialized developed for comprehensive and automated testing of networking devices on production line, providing the best cost-effective testing solutions on 2nd Layer protocol testing
P9000 Series Test Modules deliver professional network testing functionality on BigTao series test platform with high performance and availability. P9000 series are specialized developed for comprehensive and automated testing of networking devices on production line, providing the best cost-effective testing solutions on 2nd Layer protocol testing and analyzing.
P9000 series provide low cost testing solutions on BigTao platforms and meet test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoring and production line.
With support of the basic test application--TeleExplorer, P9000 series provide a full IPv4/IPv6 stack. Each port can generate 64 streams with independent configurations and statistics.
With support of the specialized automation test application--TeleATT, P9000 series deliver a fully automated testing solution which support asynchronous test for multiple DUTs. P9000 series provide the test mode of aggregation, eachother and loopback with a variety of frame patterns such as Random length, Alternate length, and Fixed length.
P9000 series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accurate chassis-to-chassis synchronization.
KEY FEATURES
Support QSFP+ on 40 Gbps
Support line-rate traffic generation and analysis
Support stream template as layer2, ipv4, ipv6 , TCP, UDP, ICMP, IGMP and ARP.
Support customized data packet generation
Accurate data rate control based on port and stream
Statistics results can be displayed in the form of table and graph
Built-in PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
SPECIFICATION LIST
|
Model |
P9002F |
|
Port Number |
2 x 100G Port |
|
Port Rate |
40G QSFP+ |
|
Physical |
Status Indicators: Tx/Rx |
|
Traffic Generation/ Traffic Statistics |
Efficient automated test software brings the revolution of production line test |
|
Transmitting Mode |
Continuous, Single burst, Multi burst, Time burst and Serialized |
|
Software Support |
TeleExplorer, TeleATT——automation test application |
|
Others |
Easy-to-use graphical user interface |
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
P9002F |
2 |
40G QSFP+ Fiber |
40 Gbps |
|
P9602F |
2 |
100G QSFP28 Fiber |
100 Gbps |
More information please view .
P8000 Series Test Modules deliver professional network testing functionality on BigTao series test platform with high performance and availability. P8000 series are specialized developed for comprehensive and automated testing of networking devices on production line, providing the best cost-effective testing solutions on 2nd Layer protocol testing
P8000 Series Test Modules deliver professional network testing functionality on BigTao series test platform with high performance and availability. P8000 series are specialized developed for comprehensive and automated testing of networking devices on production line, providing the best cost-effective testing solutions on 2nd Layer protocol testing and analyzing.
P8000 series provide low cost testing solutions on BigTao platforms and meet test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoring and production line.
With support of the basic test application--TeleExplorer, P8000 series provide a full IPv4/IPv6 stack. Each port can generate 64 streams with independent configurations and statistics.
With support of the specialized automation test application--TeleATT, P8000 series deliver a fully automated testing solution which support asynchronous test for multiple DUTs. P8000 series provide the test mode of aggregation, eachother and loopback with a variety of frame patterns such as Random length, Alternate length, and Fixed length.
P8000 series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accurate chassis-to-chassis synchronization.
KEY FEATURES
Support SFP+ on 10 Gbps Support line-rate traffic generation and analysis
Support stream template as layer2, ipv4, ipv6 , TCP, UDP, ICMP, IGMP and ARP.
Support customized data packet generation
Accurate data rate control based on port and stream
Statistics results can be displayed in the form of table and graph
Built-in PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
SPECIFICATION LIST
|
Model |
P8000 Series |
|
Port Number |
Up to 8 x 10G ports per module |
|
Physical |
Status Indicators: Tx/Rx |
|
Traffic Generation |
Traffic generating based on port and stream, per port have up to 256 different streams |
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
|
Traffic Capture |
RX data frame capture |
|
Transmitting mode |
Continuous, Single burst, Multi burst, Time burst and Serialized |
|
Software Support |
TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line |
|
Others |
Easy-to-use graphical user interface |
MODULE CLASSIFICATION
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
P8008F |
8 |
10G SFP+ Fiber |
10 Gbps |
|
P8004F |
4 |
10G SFP+ Fiber |
10 Gbps |
|
P8004C |
4 |
10G RJ45 Copper |
10 Gbps |
|
P8002F |
2 |
10G SFP+ Fiber |
10 Gbps |
|
P8002C |
2 |
10G RJ45 Copper |
10 Gbps |
More information please view .
P6000 Series Test Modules deliver professional network testing functionality on BigTao series test platform with high performance and availability. P6000 series are specialized developed for comprehensive and automated testing of networking devices on production line, providing the best cost-effective testing solutions on 2nd Layer protocol testing
P6000 Series Test Modules deliver professional network testing functionality on BigTao series test platform with high performance and availability. P6000 series are specialized developed for comprehensive and automated testing of networking devices on production line, providing the best cost-effective testing solutions on 2nd Layer protocol testing and analyzing.
P6000 series provide low cost testing solutions on BigTao platforms and meet test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoring and production line.
With support of the basic test application--TeleExplorer, P6000 series provide a full IPv4/IPv6 stack. Each port can generate 64 streams with independent configurations and statistics.
With support of the specialized automation test application--TeleATT, P6000 series deliver a fully automated testing solution which support asynchronous test for multiple DUTs. P6000 series provide the test mode of aggregation, eachother and loopback with a variety of frame patterns such as Random length, Alternate length and Fixed length.
P6000 series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accurate chassis-to-chassis synchronization.
KEY FEATURES
Support RJ45 interface on 10/100/ 1000Mbps and SFP on 100/1000 Mbps
Support line-rate traffic generation and analysis
Support stream template as layer2, ipv4, ipv6 , TCP, UDP, ICMP, IGMP and ARP.
Support customized data packet generation
Accurate data rate control based on port and stream
Statistics results can be displayed in the form of table and graph
Built-in PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
SPECIFICATION LIST
|
Model |
P6000 Series |
|
Port Number |
Up to 16 x 1G ports per module |
|
Port Rate |
RJ45: 10/100/1000M |
|
Physical |
Status Indicators: Tx/Rx |
|
Traffic Generation |
Traffic generating based on port and stream, per port have up to 64 different streams |
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
|
Traffic Capture |
RX data frame capture |
|
Transmitting mode |
Continuous, Single burst, Multi burst, Time burst and Serialized |
|
Software Support |
TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line |
|
Others |
Easy-to-use graphical user interface |
MODULE CLASSIFICATION
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
P6016C |
16 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
P6016D |
12+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
210/100/1000 Mbps and 100/1000 Mbps |
|
P6016E |
8+8 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 100/1000 Mbps |
|
P6016F |
16 |
100/1000 SFP Fiber |
100/1000 Mbps |
|
P6012C |
12 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
P6012D |
8+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 100/1000 Mbps |
|
P6012F |
12 |
100/1000 SFP Fiber |
100/1000 Mbps |
More information please view .
V9000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V9000 Series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoringand productionline.
V9000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V9000 Series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoringand productionline.
With support of larger number of streams, higher port density and larger traffic capture memoryV9000 Series offer a best cost-effectivetest solution.
V9000 Series support a full IPv4/IPv6 stack. Each port can generate 512 streams with up to 4 variable domains per stream and simulate hundreds of thousands of interfaces and tens of millionsof realistic connections.
With plenty of protocol templates and customizable packet payload and rate, V9000 Series can provide complex protocoltest and emulation.
V9000 Series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accuratechassis-to-chassissynchronization.
KEY FEATURES
Support QSFP+ on 40G ports
Support line-rate traffic generating and analysis
Integrated IPv4 and IPv6 stack, support layer 2-3 network testing
Support a variety of protocols emulation including OSPF, ISIS, BGP, IGMP, PPPoE, RIPv2, RIPng, etc.
Accurate and dynamic data rate regulation based on port and stream
Line-rate traffic capture with support of massage editing, filtering and searching
Embedded PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
Support customized error packet generation
Graphical user interface for configuration, data capture and real-time analysis
Test suit based on RFC2544, RFC2889 and RFC3918
SPECIFICATION LIST
|
Model |
V9002F |
V9002A |
|
Port Number |
2 x 100G Port |
2 x 100G Port + 12 x10G |
|
Port Rate |
100G/40G |
100G/40G, 10G/100G(Combo) |
|
Physical |
Status Indicators: Tx/Rx |
Status Indicators: Tx/Rx |
|
Traffic Generation |
Traffic generating based on port and stream, per port have up to 256 different streams |
|
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
|
|
Traffic Capture |
RX data frame capture |
|
|
Protocol Emulation |
Integrated IPv4 and IPv6 dual stack, support ARP, NDP, Ping |
|
|
Transmitting mode |
Continuous, Single burst, Multi burst, Time burst and Serialized |
|
|
Software Support |
TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line |
|
|
Others |
Easy-to-use graphical user interface |
|
More information please view .
V8000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V8000 Series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoring and production line.
V8000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V8000 Series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment , quality control, performance monitoring and production line.
With support of larger number of streams, higher port density and larger traffic capture memory V8000 Series offer a best cost-effective test solution.
V8000 Series support a full IPv4/IPv6 stack. Each port can generate 64 streams with up to 4 variable domains per stream and simulate hundreds of thousands of interfaces and tens of millions of realistic connections.
With plenty of protocol templates and customizable packet payload and rate, V8000 Series can provide complex protocol test and emulation.
V8000 Series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accurate chassis-to-chassis synchronization.
KEY FEATURES
Support SFP+ on 10G ports
Support line-rate traffic generating and analysis
Integrated IPv4 and IPv6 stack, support layer 2-3 network testing
Support a variety of protocols emulation including RIP, OSPF, ISIS, BGP, IGMP, PPPoE , DHCP, etc.
Accurate and dynamic data rate regulation based on port and stream
Line-rate traffic capture with support of massage editing, filtering and searching
Embedded PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
Support customized error packet generation
Graphical user interface for configuration, data capture and real-time analysis
Test suit based on RFC2544, RFC2889 and RFC3918
SPECIFICATION LIST
|
Model |
V8000 Series |
|
Port Number |
Up to 8 x 10G ports per module |
|
Port Rate |
10Gbps SFP+/RJ45 |
|
Physical |
Status Indicators: Tx/Rx |
|
Traffic Generation |
Traffic generating based on port and stream, per port have up to 256 different streams |
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
|
Traffic Capture |
RX data frame capture |
|
Protocol Emulation |
Integrated IPv4 and IPv6 dual stack, support ARP, NDP, Ping |
|
Transmitting mode |
Continuous, Single burst, Multi burst, Time burst and Serialized |
|
Software Support |
TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line |
|
Others |
Easy-to-use graphical user interface |
MODULE CLASSIFICATION
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
V6016C |
16 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6016F |
16 |
1000M SFP Fiber |
1000 Mbps |
|
V6016M |
8+8 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 1Gbps |
|
V6008C |
8 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6008F |
8 |
1000M SFP Fiber |
1000 Mbps |
|
V6008M |
4+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 1Gbps |
|
V6004C |
4 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6004F |
4 |
1000M SFP Fiber |
1000 Mbps |
|
V8008F |
8 |
10G SFP+ Fiber |
10 Gbps |
|
V8004F |
4 |
10G SFP+ Fiber |
10 Gbps |
|
V8002F |
2 |
10G SFP+ Fiber |
10 Gbps |
|
V9002F |
2 |
40G QSFP+ Fiber |
40 Gbps |
More information please view .
V6000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V6000 series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment, quality control, performance monitoring and production line.
V6000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V6000 series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment, quality control, performance monitoring and production line.
With support of larger number of streams, higher port density and larger traffic capture memory, V6000 series offer a best cost-effective test solution.
V6000 series support a full IPv4/IPv6 stack. Each port can generate 64 streams with up to 4 variable domains per stream and simulate hundreds of thousands of interfaces and tens of millions of realistic connections.
With plenty of protocol templates and customizable packet payload and rate, V6000 series can provide complex protocol test and emulation.
V6000 series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accurate chassis-to-chassis synchronization.
KEY FEATURES
Support RJ45 interface on 10/100/ 1000Mbps and SFP on 100/1000 Mbps
Support line-rate traffic generating and analysis
Integrated IPv4 and IPv6 stack, support layer 2-3 network testing
Support a variety of protocols emulation including RIP, OSPF, ISIS, BGP, IGMP, PPPoE , DHCP, etc.
Accurate and dynamic data rate regulation based on port and stream
Line-rate traffic capture with support of packets editing, filtering and searching
Embedded PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
Support customized error packet generation
Graphical user interface for configuration, data capture and real-time analysis
Test suit based on RFC2544, RFC2889 and RFC3918
SPECIFICATION LIST
|
Model |
V6000 Series |
|
Port Number |
Up to 16 x 1G ports per module |
|
Port Rate |
RJ45: 10/100/1000M |
|
Physical |
Status Indicators: Tx/Rx |
|
Traffic Generation |
Traffic generating based on port and stream, per port have up to 64 different streams |
|
Traffic Statistics |
Statistics results can be displayed in the form of data table and chart |
|
Traffic Capture |
RX data frame capture |
|
Protocol Emulation |
Integrated IPv4 and IPv6 dual stack, support ARP, NDP, Ping |
|
Transmitting mode |
Continuous, Single burst, Multi burst, Time burst and Serialized |
|
Software Support |
TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line |
|
Others |
Easy-to-use graphical user interface |
Related Module List
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
V6016C |
16 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6016F |
16 |
1000M SFP Fiber |
1000 Mbps |
|
V6016M |
8+8 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 1Gbps |
|
V6012C |
12 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6012F |
12 |
1000M SFP Fiber |
1000 Mbps |
|
V6008C |
8 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6008F |
8 |
1000M SFP Fiber |
1000 Mbps |
|
V6008M |
4+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 1Gbps |
|
V6004C |
4 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6004F |
4 |
1000M SFP Fiber |
1000 Mbps |
|
V8008F |
8 |
10G SFP+ Fiber |
10 Gbps |
|
V8004F |
4 |
10G SFP+ Fiber |
10 Gbps |
|
V8002F |
2 |
10G SFP+ Fiber |
10 Gbps |
|
V9002F |
2 |
40G QSFP+ Fiber |
40 Gbps |
More information please view .
High performance unified platform delivering comprehensive testing solutions for IP forwarding devices in each stage of R & D, experiment , quality control, performance monitoring and production line test.
High performance unified platform delivering comprehensive testing solutions for IP forwarding devices in each stage of R & D, experiment , quality control, performance monitoring and production line test.
With support of high port density 100G, 40G, 10G and 10/100/1000M load modules BigTao can deliver the best cost effective multilayer protocol testing and emulation solutions.
Full IPv4 and IPv6 protocol stack support, per port simulate hundreds of thousands of interfaces and tens of millions of realistic connections.
KEY FEATURES
Support QSFP28, QSFP+, SFP+, SFP, RJ45 interfaces on 100G, 40, 10G and 10/100/1000Mbps
Integrated PC running Windows XP for separately operating
Multi-user login with easy remote access via a network
Daisy chain of up to 100 chassis with all ports synchronization
Graphical user interface for configuration, data capture and real-time analysis
Support TCL for automating test control
C++ API for customizing test applications
Test suit based on RFC2544, RFC2889 and RFC3918
CHASSIS SPECIFICATIONS
|
Model |
BigTao200 |
BigTao220 |
BigTao6000 |
|
Slots |
2 |
2 |
6 |
|
Power |
AC 110~240V |
||
|
CPU |
Intel dual-core HF CPU |
Intel Atom E3845 CPU |
Intel dual-core HF CPU |
|
System Control |
Reset button, Power switch |
||
|
Cooling Devices |
2 System Fans and 1 Power Fan |
4 System Fans |
2 System Fans and 1 Power Fan |
|
Status Indicators |
Power, Hard disk |
Power, Fan, Temp, Link LCD Screen |
Power, Hard disk |
|
Temperature |
5℃-40℃ |
||
|
Humidity |
20-85%, RH |
||
|
Load Module Available |
P/V6000 Series, P/V8000 Series, P/V9000 Series, P/V9600 Series |
||
|
Size |
310mm×280mm ×89mm |
371mm×424mm ×107mm |
440mm×436mm ×133mm |
|
Weight |
5kg |
12kg |
|
MODULE CLASSIFICATION
V Series Test Modules
High performance and full-specification Ethernet test modules running on BigTao series platform.
Supporting full functions of all Ethernet technology test needs.
Classified by the port rate:
V6000 series support 10/100/1000 Mbps per port
V8000 series support 10 Gbps
V9000 series support 40 Gbps
V9600 series support 100 Gbps
P Series Test Modules
P series test modules deliver network testing functionality on BigTao series test platform with high series are specialized developed for comprehensive and automated testing of networking devices on production line.
Classified by the port rate:
P6000 series support 10/100/1000 Mbps per port
P8000 series support 10 Gbps
P9000 series support 40 Gbps
P9600 series support 100 Gbps
V Series Test Modules List
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
V6016C |
16 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6016F |
16 |
1000M SFP Fiber |
1000 Mbps |
|
V6016M |
8+8 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 1Gbps |
|
V6012C |
12 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6012F |
12 |
1000M SFP Fiber |
1000 Mbps |
|
V6008C |
8 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6008F |
8 |
1000M SFP Fiber |
1000 Mbps |
|
V6008M |
4+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 1Gbps |
|
V6004C |
4 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
V6004F |
4 |
1000M SFP Fiber |
1000 Mbps |
|
V8008F |
8 |
10G SFP+ Fiber |
10 Gbps |
|
V8004F |
4 |
10G SFP+ Fiber |
10 Gbps |
|
V8002F |
2 |
10G SFP+ Fiber |
10 Gbps |
|
V8008C |
8 |
10G RJ45 Copper |
10 Gbps |
|
V8004C |
4 |
10G RJ45 Copper |
10 Gbps |
|
V8002C |
2 |
10G RJ45 Copper |
10 Gbps |
|
V8008M |
4+4 |
10G RJ45 Copper and 100G SFP+ Fiber |
10 Gbps |
|
V8004M |
2+2 |
10G RJ45 Copper and 100G SFP+ Fiber |
10 Gbps |
|
V9002F |
2 |
40G QSFP+ Fiber |
40 Gbps |
|
V9602F |
2 |
100G QSFP28 Fiber |
100 Gbps |
P Series Test Modules List
|
Module Name |
Ports Per Module |
Connecter Type |
Single Rate |
|
P6016C |
16 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
P6016D |
12+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
210/100/1000 Mbps and 100/1000 Mbps |
|
P6016E |
8+8 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 100/1000 Mbps |
|
P6016F |
16 |
100/1000 SFP Fiber |
100/1000 Mbps |
|
P6012C |
12 |
10/100/1000M RJ45 Copper |
10/100/1000 Mbps |
|
P6012D |
8+4 |
10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber |
10/100/1000 Mbps and 100/1000 Mbps |
|
P6012F |
12 |
100/1000 SFP Fiber |
100/1000 Mbps |
|
P8008F |
8 |
10G SFP+ Fiber |
10 Gbps |
|
P8004F |
4 |
10G SFP+ Fiber |
10 Gbps |
|
P8004C |
4 |
10G RJ45 Copper |
10 Gbps |
|
P8002F |
2 |
10G SFP+ Fiber |
10 Gbps |
|
P8002C |
2 |
10G RJ45 Copper |
10 Gbps |
|
P9002F |
2 |
40G QSFP+ Fiber |
40 Gbps |
|
P9602F |
2 |
100G QSFP28 Fiber |
100 Gbps |
More information please view .
Netlite handheld Ethernet tester is portable Ethernet tester for Ethernet troubleshooting and performance measurement, with strong comprehensive functions for network test, can totally meet the testing requirements of Ethernet network deployment, installation, operation and maintenance.
Netlite handheld Ethernet tester is portable Ethernet tester for Ethernet troubleshooting and performance measurement, with strong comprehensive functions for network test, can totally meet the testing requirements of Ethernet network deployment, installation, operation and maintenance.
No screen structure, compact and flexible, remote WiFi control by intelligent terminals (mobile phones, tablet PCs, laptops, etc.) .In addition, Netlite also provides a wire connection mode.
Netlite support full line rate traffic generation, capture and analysis, support online filter and capture, support RFC2544 test suite, Bert.
Netlite support flexible data packet configurations, single port can generate 64 flows; support a variety of application layer protocol test, best tools for filed installation, maintenance, verify, and troubleshooting.
KEY FEATURES
RFC2544 test; throughput、latency、frame loss and back-to-back
BERT Inline filter and capture, including terminal and through mode
Layer 1~3 loopback testing
Copper TDR testing
SFP DDM
Switch port locate
Ping，Arp sweep，Trace route
Configure profile save and load
SPECIFICATIONS
|
Test port |
Two 10/100/1000M BASE-T RJ-45 ports; Two 100M/1000M BASE-X SFP optical fiber ports; Support “1 cu port+1 fiber port”、”2 fiber ports”、”2 cu ports”、”single fiber port”、”1 cu port” five modes |
|
Management port |
One WiFi，one RJ45（10M） |
|
Power supply |
One Micro USB |
|
Leds indicate |
PORT1/2 LINK ACT |
|
System control |
One on/off button，one reset button for configuration reset |
|
AC adapt |
input：100-240VAC, 50-60HZ |
|
Battery |
5 hours |
|
temperature |
-10~45℃ |
|
humidity |
5%~95%，Non condensation |
|
Dimensions |
80x160x35mm |
|
weight |
200g |
|
features |
Client APP mode |
More information please view
xnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery network
XnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery networks. The appliance is a passive device that is used to non-intrusively monitor key network links to provide the visibility into network and applications
Network & Application Management Center is grouped by the following components.
|
Appliance |
HW&SW appliance for packet capturing and analysis |
|
Console |
Windows-based UI for network visibility, management and troubleshooting |
KEY FEATURES
Integrated solution of data recording, traffic analysis and problem diagnostics
Comprehensive non-blocking end-to-end application monitoring and Key Performance Indicators (KPIs) generating
Wire-speed packet capturing Index powered fast packet retrieval
Embedded packet analyzer for ultra-fast packets decoding and troubleshooting decoding and troubleshooting
Flexible monitoring enabled by auto application detection and user-configurable traffic definition
Intuitive UI for network visibility, service quality and security alarms
Multiple Ethernet network interfaces, from 10/100/1000 Mbps to 10 GBE over copper or fiber
Flexible on-demand storage capacity provides right solution for various networks
Rack-mounted and portable appliances for different on-site deployment needs
PRODUCT MODEL
|
Model |
NS600 |
NS1000 |
NS2000 |
NS4000 |
NA10 |
NA20 |
NA30 |
NA40 |
|
Capture NIC |
4*1G |
4*1G |
4*1G |
4*1G |
2*10G |
2*10G |
4*10G |
4*10G |
|
Analyze perf |
600Mbps |
1Gbps |
2Gbps |
4Gbps |
10Gbps |
20Gbps |
30Gbps |
40Gbps |
|
Capture perf |
600Mbps |
1Gbps |
2Gbps |
4Gbps |
10Gbps |
20Gbps |
30Gbps |
40Gbps |
|
Storage (TB) |
1+2 |
2+4 |
2+8 |
2+12 |
8+24 |
16+48 |
24+96 |
48+192 |
|
Size |
1U |
1U |
2U |
2U |
4U |
6U |
8U |
10U |
PRODUCT ATTRIBUTE
|
Packets Record |
The TALENET appliance captures and stores packets to disks and provides packet retrieval function to user. This is very helpful when troubleshooting network issues and also for network forensics. |
|
Packets Analyze and KPI |
The TALENET appliance can process the packets in real-time for providing the visibility of network traffic and quality. It group packets in flows, recognize applications, calculate network and application performance indicators, generate alarms based on settings, baseline and DDOS pattern. The analysis data is kept in the database for long time and provide network visibility for capacity planning, quality evaluation and security issues detection. |
|
Data replay |
The TALENET NAPM system provides user to retrieval network KPI data and raw packets. User can replay all of network KPI charts and tables and do deeply data mining from trending chart, to key service flows, finally get the raw packets. |
|
Packets decode and diagnose |
The TALENET console has an embedded analyzer which is enhanced to decode packets in very high speed way, much faster than wireshark. Also its protocols experts system will diagnose the issues and help the user to locate the root cause. |
|
Application recognize |
The TALENET NAPM system supports user to define application in several ways. Except traditional port based definition, user can use any form of the IP-PORT pair to define an application, which is much suitable for widespread use. |
More information please view .
XnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experienc
xnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery networks. The appliance is a passive device that is used to non-intrusively monitor key network links to provide the visibility into network and applications
Network & Application Management Center is grouped by the following components
|
Appliance |
HW&SW appliance for packet capturing and analysis |
|
Console |
Windows-based UI for network visibility, management and troubleshooting |
KEY FEATURES
Integrated solution of data recording, traffic analysis and problem diagnostics
Comprehensive non-blocking end-to-end application monitoring and Key Performance Indicators (KPIs) generating
Wire-speed packet capturing Index powered fast packet retrieval
Embedded packet analyzer for ultra-fast packets decoding and troubleshooting decoding and troubleshooting
Flexible monitoring enabled by auto application detection and user-configurable traffic definition
Intuitive UI for network visibility, service quality and security alarms
Multiple Ethernet network interfaces, from 10/100/1000 Mbps to 10 GBE over copper or fiber
Flexible on-demand storage capacity provides right solution for various networks
Rack-mounted and portable appliances for different on-site deployment needs
PRODUCT MODEL
|
Model |
PS1000 |
PS4000 |
PA10 |
PA10E |
|
Capture NIC |
4*1G |
4*1G |
2*10G |
2*10G |
|
Analyze perf |
1Gpbs |
4Gpbs |
10Gpbs |
10Gpbs |
|
Capture perf |
1Gpbs |
4Gbps |
10Gbps |
10Gbps |
|
Storage (TB) |
3+6 |
3+10 |
4+12 |
8+24 |
PRODUCT ATTRIBUTE
|
Packets Record |
The TALENET appliance captures and stores packets to disks and provides packet retrieval function to user. This is very helpful when troubleshooting network issues and also for network forensics. |
|
Packets Analyze and KPI |
The TALENET appliance can process the packets in real-time for providing the visibility of network traffic and quality. It group packets in flows, recognize applications, calculate network and application performance indicators, generate alarms based on settings, baseline and DDOS pattern. The analysis data is kept in the database for long time and provide network visibility for capacity planning, quality evaluation and security issues detection. |
|
Data replay |
The TALENET NAPM system provides user to retrieval network KPI data and raw packets. User can replay all of network KPI charts and tables and do deeply data mining from trending chart, to key service flows, finally get the raw packets. |
|
Packets decode and diagnose |
The TALENET console has an embedded analyzer which is enhanced to decode packets in very high speed way, much faster than wireshark. Also its protocols experts system will diagnose the issues and help the user to locate the root cause. |
|
Application recognize |
The TALENET NAPM system supports user to define application in several ways. Except traditional port based definition, user can use any form of the IP-PORT pair to define an application, which is much suitable for widespread use. |
More information please view .