Product Name: Laser Welding Machine
Description:
Pulse handheld laser welding machine. The laser pulse frequency is up to 100 spots, which is suitable for welding most materials except aluminum alloy.
Pulse handheld laser welding machine
Laser three-dimensional (3D)welding
Laser power:
300 W(Air-cooled). 500W(Water-cooled). 800W(Water-cooled)
1000W(Water-cooled). 2000W. 3000W. 6000W
Continuous hand-held laser welding machine
Laser three-dimensional (3D)welding
Laser power:
300 W(Air-cooled). 500W(Water-cooled). 800W(Water-cooled)
Product Name: Laser Cleaning Machine
Description:
Laser Cleaning -- New technique, Environment protecting,not damage the base material and very long operation life.
Feature Of Hand-held Laser Cleaning Machine:
1/Laser Cleaning -- New technique, Environment protecting,not damage the base material and very long operation life.
2/No noise, no residual and no secondary pollution.
For use in:
Abrasive cleaning, Peeling paint or wipe off coating layer, preprocessing before pacts coating, aviation components cleaning, soldering and weld preprocessing, clean away the oxide, oil stain and residue, history relics restore and save.
Case: rust removal
high energy pulse laser cutter focus on object surfaces to generate plasma, with the spot high spped moving, form a plume to make debris move out.
Mainly use for metal cleaning.
base metal |
The degree of corrosion 9(mm) |
cleaning efficiency (mm²/s) |
The effective depth of focus(mm) |
cleaning effect |
Parent metal damage |
Rusted carbon steel plate cast iron |
Moderate rust thickness |
4000 |
>45 |
good |
No |
Case: removing preparation
For paint, chemical coating and special process surface, based on the surface and the substrate for the laser different absorption and different damage width, peel coating, do not damage the substrate.
Mainly used for paint removal and coating stripping
base metal |
coating thickness |
cleaning efficiency (mm²/s) |
The effective depth of focus(mm) |
cleaning effect |
Parent metal damage |
White metallic baking varnish |
> |
1500 |
>30 |
good |
No |
The new generation Laser Cleaning Machine with high technology that applies for the process of the material surface cleaning, which is easily to be set up, operated and automated. No need of chemistry, water or other media, the equipment can be also applied for removing off Resin, grease, stains, dirt, rust material, coating, coating and information please view here.
Product Name: Laser Cleaning Machine
Description:
Laser Cleaning -- New technique, Environment protecting,not damage the base material and very long operation life.
Feature Of Hand-held Laser Cleaning Machine:
1/Laser Cleaning -- New technique, Environment protecting,not damage the base material and very long operation life.
2/No noise, no residual and no secondary pollution.
For use in:
Abrasive cleaning, Peeling paint or wipe off coating layer, preprocessing before pacts coating, aviation components cleaning, soldering and weld preprocessing, clean away the oxide, oil stain and residue, history relics restore and save.
Case: rust removal
high energy pulse laser cutter focus on object surfaces to generate plasma, with the spot high spped moving, form a plume to make debris move out.
Mainly use for metal cleaning.
base metal |
The degree of corrosion 9(mm) |
cleaning efficiency (mm²/s) |
The effective depth of focus(mm) |
cleaning effect |
Parent metal damage |
Rusted carbon steel plate cast iron |
Moderate rust thickness |
4000 |
>45 |
good |
No |
Case: removing preparation
For paint, chemical coating and special process surface, based on the surface and the substrate for the laser different absorption and different damage width, peel coating, do not damage the substrate.
Mainly used for paint removal and coating stripping
base metal |
coating thickness |
cleaning efficiency (mm²/s) |
The effective depth of focus(mm) |
cleaning effect |
Parent metal damage |
White metallic baking varnish |
> |
1500 |
>30 |
good |
No |
The new generation Laser Cleaning Machine with high technology that applies for the process of the material surface cleaning, which is easily to be set up, operated and automated. No need of chemistry, water or other media, the equipment can be also applied for removing off Resin, grease, stains, dirt, rust material, coating, coating and information please view here.
Product Name: Beauty Carving series Fiber Laser Cutting Machine
Description:
Dual servo motor drive
Feature:
1/Dual servo motor drive
2/Higher stability, higher speed and faster acceleration
3/Single platform design for easier use
4/Compact design and smaller floor space
For use in:
Suitable for cutting of carbon steel, stainless steel, alloy steel, galvanized sheet, aluminum sheet, copper sheet and other metal materials
Technical Parameters
Models |
JC-FF-3015 |
JC-FF-4020 |
JC-FF-6025 |
Working area |
3000mm*1500mm |
4000mm*2000mm |
6000mm*2500mm |
X axis |
3050mm |
4050mm |
6050mm |
Y axis |
1550mm |
2050mm |
2550mm |
Z axis |
90mm |
90mm |
90mm |
X,Y axis positionaI accuracy |
± |
± |
± |
X,Y axis repeated positioning accuracy |
± |
± |
± |
Maximum fixing speed |
90m/min |
120m/min |
120m/min |
Maximum acceleration |
|||
Laser power |
500w/800w/1000w/1500w |
||
Dimension of machine |
4900*2200*1400 |
||
The installation area of machine |
6900*3700*1400 |
7900*4200*1400 |
9100*4200*1400 |
Weight |
3T |
5T |
6T |
We can supply Various kinds of Laser Cutting Machine, Equipment, including Plate Laser Cutting Machine, Pipe Laser Cutting Machine, DUAL-USE Laser Cutting Machine, and so on, We are pleased to announce our brand new Laser Cutting Machine! Please see our information please view here.
Product Name: Beauty Carving series Fiber Laser Cutting Machine
Description:
Dual servo motor drive
Feature:
1/Dual servo motor drive
2/Higher stability, higher speed and faster acceleration
3/Single platform design for easier use
4/Compact design and smaller floor space
For use in:
Suitable for cutting of carbon steel, stainless steel, alloy steel, galvanized sheet, aluminum sheet, copper sheet and other metal materials
Technical Parameters
Models |
JC-FF-3015 |
JC-FF-4020 |
JC-FF-6025 |
Working area |
3000mm*1500mm |
4000mm*2000mm |
6000mm*2500mm |
X axis |
3050mm |
4050mm |
6050mm |
Y axis |
1550mm |
2050mm |
2550mm |
Z axis |
90mm |
90mm |
90mm |
X,Y axis positionaI accuracy |
± |
± |
± |
X,Y axis repeated positioning accuracy |
± |
± |
± |
Maximum fixing speed |
90m/min |
120m/min |
120m/min |
Maximum acceleration |
|||
Laser power |
500w/800w/1000w/1500w |
||
Dimension of machine |
4900*2200*1400 |
||
The installation area of machine |
6900*3700*1400 |
7900*4200*1400 |
9100*4200*1400 |
Weight |
3T |
5T |
6T |
We can supply Various kinds of Laser Cutting Machine, Equipment, including Plate Laser Cutting Machine, Pipe Laser Cutting Machine, DUAL-USE Laser Cutting Machine, and so on, We are pleased to announce our brand new Laser Cutting Machine! Please see our information please view here.
Product Name: Rapid series Fiber Laser Cutting Machine
Description:
Dual servo motor drive
Feature of fiber laser cutting machine:
1/Dual servo motor drive
2/Higher stability, higher speed and faster acceleration
3/Fully digital CNC servo motor communication
4/Adopt Baichu system or Jingchuang Weihong customized system
For use in:
Suitable for cutting of carbon steel, stainless steel, alloy steel, galvanized sheet, aluminum sheet, copper sheet and other metal materials
No matter the China Laser Cutting Machine you choose, you are assured of reliable operation, consistent accuracy, and high control over the production process for top-quality laser cutting results. In addition, we can also supply Plate Laser Cutting Machine and Laser Welding information please view here.
Technical Parameters
Models |
JC-FF-3015 |
JC-FF-4020 |
JC-FF-6020 |
Operation mode |
QBH continuous mode |
||
Working area |
3000mm*1500mm |
4000mm*2000mm |
6000mm*2000mm |
X axis |
3050mm |
4050mm |
6050mm |
Y axis |
1550mm |
2050mm |
2050mm |
Z axis |
190mm |
190mm |
190mm |
X,Y axis positionaI accuracy |
± |
± |
± |
X,Y axis repeated positioning accuracy |
± |
± |
± |
Maximum fixing speed |
120m/min |
120m/min |
120m/min |
Maximum acceleration |
|||
Laser power |
500w/800w/1000w/1500w/2000w/2500w/3000w/4000w/6000w/8000w |
||
Dimension of machine |
4900*2200*1400 |
5900*2700*1400 |
7900*2700*1400 |
The installation area of machine |
6900*3700*1400 |
7900*4200*1400 |
9100*4200*1400 |
Weight |
7T |
Product Name: Rapid series Fiber Laser Cutting Machine
Description:
Dual servo motor drive
Feature of fiber laser cutting machine:
1/Dual servo motor drive
2/Higher stability, higher speed and faster acceleration
3/Fully digital CNC servo motor communication
4/Adopt Baichu system or Jingchuang Weihong customized system
For use in:
Suitable for cutting of carbon steel, stainless steel, alloy steel, galvanized sheet, aluminum sheet, copper sheet and other metal materials
No matter the China Laser Cutting Machine you choose, you are assured of reliable operation, consistent accuracy, and high control over the production process for top-quality laser cutting results. In addition, we can also supply Plate Laser Cutting Machine and Laser Welding information please view here.
Technical Parameters
Models |
JC-FF-3015 |
JC-FF-4020 |
JC-FF-6020 |
Operation mode |
QBH continuous mode |
||
Working area |
3000mm*1500mm |
4000mm*2000mm |
6000mm*2000mm |
X axis |
3050mm |
4050mm |
6050mm |
Y axis |
1550mm |
2050mm |
2050mm |
Z axis |
190mm |
190mm |
190mm |
X,Y axis positionaI accuracy |
± |
± |
± |
X,Y axis repeated positioning accuracy |
± |
± |
± |
Maximum fixing speed |
120m/min |
120m/min |
120m/min |
Maximum acceleration |
|||
Laser power |
500w/800w/1000w/1500w/2000w/2500w/3000w/4000w/6000w/8000w |
||
Dimension of machine |
4900*2200*1400 |
5900*2700*1400 |
7900*2700*1400 |
The installation area of machine |
6900*3700*1400 |
7900*4200*1400 |
9100*4200*1400 |
Weight |
7T |
Product Name: Topspeed series Fiber Laser Cutting Machine
Description:
Full-flying optical path structure, the Y-axis is made of aluminum alloy integrated Raya beam, and the bed is welded by high-strength steel plate. After tempering, aging eliminates stress.
Feature:
1/Full-flying optical path structure, the Y-axis is made of aluminum alloy integrated Raya beam, and the bed is welded by high-strength steel plate. After tempering, aging eliminates stress. Pre-adjusted, fine-tuned and durability tested to ensure that the machine has sufficient light accuracy
2/The cutting quality of the whole processing area is excellent, the cutting parts are easy to collect, the vision of the processing area is wide and easy to detect and operate
3/The control system is carefully designed to achieve the best match. Using an advanced pneumatic system, three gases can be automatically switched.
For use in:
Suitable for cutting of carbon steel, stainless steel, alloy steel, galvanized sheet, aluminum sheet, copper sheet and other metal materials.
We can supply Various kinds of Laser Cutting Machine, Equipment, including Plate Laser Cutting Machine, Pipe Laser Cutting Machine, DUAL-USE Laser Cutting Machine, and so on, We are pleased to announce our brand new Laser Cutting Machine! Please see our information please view here.
Technical Parameters
Models |
JC-TF-3015 |
JC-TF-4020 |
JC-TF-6020 |
Operation mode |
QBH continuous mode |
||
Qorking area |
3000mm*1500mm |
4000mm*2000mm |
6000mm*2000mm |
X axis |
3050mm |
4050mm |
6050mm |
Y axis |
1550mm |
2050mm |
2050mm |
Z axis |
300mm |
300mm |
300mm |
X,Y axis positionaI accuracy |
± |
± |
± |
X,Y axis repeated positioning accuracy |
± |
± |
± |
Maximum fixing speed |
140m/min |
140m/min |
140m/min |
Maximum acceleration |
|||
Laser power |
500w/800w/1000w/1500w/2000w/2500w/3000w/4000w/6000w/8000w |
||
Dimension of machine |
4900*2200*1400 |
5900*2700*1400 |
7900*2700*1400 |
The installation area of machine |
12900*4800*2200 |
13900*5300*2200 |
15900*5300*2200 |
Weight |
11T |
13T |
16T |
Product Name: Topspeed series Fiber Laser Cutting Machine
Description:
Full-flying optical path structure, the Y-axis is made of aluminum alloy integrated Raya beam, and the bed is welded by high-strength steel plate. After tempering, aging eliminates stress.
Feature:
1/Full-flying optical path structure, the Y-axis is made of aluminum alloy integrated Raya beam, and the bed is welded by high-strength steel plate. After tempering, aging eliminates stress. Pre-adjusted, fine-tuned and durability tested to ensure that the machine has sufficient light accuracy
2/The cutting quality of the whole processing area is excellent, the cutting parts are easy to collect, the vision of the processing area is wide and easy to detect and operate
3/The control system is carefully designed to achieve the best match. Using an advanced pneumatic system, three gases can be automatically switched.
For use in:
Suitable for cutting of carbon steel, stainless steel, alloy steel, galvanized sheet, aluminum sheet, copper sheet and other metal materials.
We can supply Various kinds of Laser Cutting Machine, Equipment, including Plate Laser Cutting Machine, Pipe Laser Cutting Machine, DUAL-USE Laser Cutting Machine, and so on, We are pleased to announce our brand new Laser Cutting Machine! Please see our information please view here.
Technical Parameters
Models |
JC-TF-3015 |
JC-TF-4020 |
JC-TF-6020 |
Operation mode |
QBH continuous mode |
||
Qorking area |
3000mm*1500mm |
4000mm*2000mm |
6000mm*2000mm |
X axis |
3050mm |
4050mm |
6050mm |
Y axis |
1550mm |
2050mm |
2050mm |
Z axis |
300mm |
300mm |
300mm |
X,Y axis positionaI accuracy |
± |
± |
± |
X,Y axis repeated positioning accuracy |
± |
± |
± |
Maximum fixing speed |
140m/min |
140m/min |
140m/min |
Maximum acceleration |
|||
Laser power |
500w/800w/1000w/1500w/2000w/2500w/3000w/4000w/6000w/8000w |
||
Dimension of machine |
4900*2200*1400 |
5900*2700*1400 |
7900*2700*1400 |
The installation area of machine |
12900*4800*2200 |
13900*5300*2200 |
15900*5300*2200 |
Weight |
11T |
13T |
16T |
Laser cutting machine systems are a cost-effective way to cut out parts and engrave tools. Heavy duty laser cutting machine can supply you with a quick and efficient way to cut and engrave objects.
Cutting with Fiber laser cutting machine is cleaner than most other cutting methods, and often requires less deburring and finishing after the cutting. Although this depends on the cutting materials, laser cutting is famous for making accurate and precise cuts.
Plate Laser Cutting Machine pricing and costs are different because of model, type or power of laser. If you plan to cut metal or other thick materials, you'll need a higher watt laser than you wanted to cut thinner materials. However, the higher the laser's wattage, the higher the price. You should balance the cost and practicality of laser metal cutters. Entry-level optical fiber laser cutting machine units often contain weak lasers, suitable for light engraving or cutting only. Using an underpowered laser to cut a thick or tough material can ruin the surface, requiring expensive material replacement.
Purchasing a high watt cnc laser cutting machine are often value effective for prolific cutters.
If you don't understand what you propose to chop, otherwise you merely need to chop a large form of materials, a high watt optical device is best. This kind of metal laser cutting machine is powerful enough to cut and engrave nearly something, supplying you with the flexibleness you wish. However, high electrical power optical device laser cutting machines square measure usually rather more expensive valuable than entry level units. You'll be able to pay anyplace from $10,000 to $50,000 for a few models.
Ask for a quote once buying a custom-designed laser cutting machinery or custom laser cutting Prices vary wide for custom-designed laser cutting machines. belongings you take under consideration once estimating the value of your custom model square measure power, work-surface size, the kind of tube laser cutting machine and any further options you need. Generally, the larger the electric power and work-surface, the larger the worth the value. continuously discuss what options your custom model ought to have, and acquire associate itemized value quote. Or, you could build your own laser cutter.
Fiber laser cutting machine is more energy efficient, accurate and economical for most high-end industries. Fiber laser machines make more accurate cuts than more traditional CO2 lasers, and have a longer lifespan. Fiber lasers tend to be more expensive than traditional lasers, but last longer and require replacement parts and less maintenance.
The cost of laser cutting machines for sale can be very expensive. If you plan to use the machine for a single project or aren't sure you can afford one, consider hiring a cutting service and using its laser cutting machine facilities. Some will even cut your parts for you.
Depending on the cnc laser cutting machine part volume, a stamping press may supply the lowest cost per part. When speaking of metal forming in a press, however, you also are talking about the requirement of investing in tooling. Stamping also presents the ability to perform multiple tasks, such as forming and tapping, as part of the production process.
A traditional turret punch press can cut out holes and shapes economically, but it involves tooling. A punching machine also can’t match the production speeds of laser cutting machines. As with a stamping press, some forming can be done on the punch press. An abrasive waterjet also is good for thick materials and for applications in which the metal can’t have a heat-affected zone, which is a problem with most thermal cutting methods. Both plasma and water jet cutting systems cost less than metal laser cutting machine, but many times do not match the laser’s cutting speed. Of course, plasma cutting and waterjet systems can boost productivity with the use of multiple heads and the ability to cut stacked blanks; the application obviously would influence what exactly you need. More information, pls visit here.
Fucntions of fiber laser cutting machine
Advantages of fiber laser cutting machine
Laser cutting machine systems are a cost-effective way to cut out parts and engrave tools. Heavy duty laser cutting machine can supply you with a quick and efficient way to cut and engrave objects.
Cutting with Fiber laser cutting machine is cleaner than most other cutting methods, and often requires less deburring and finishing after the cutting. Although this depends on the cutting materials, laser cutting is famous for making accurate and precise cuts.
Plate Laser Cutting Machine pricing and costs are different because of model, type or power of laser. If you plan to cut metal or other thick materials, you'll need a higher watt laser than you wanted to cut thinner materials. However, the higher the laser's wattage, the higher the price. You should balance the cost and practicality of laser metal cutters. Entry-level optical fiber laser cutting machine units often contain weak lasers, suitable for light engraving or cutting only. Using an underpowered laser to cut a thick or tough material can ruin the surface, requiring expensive material replacement.
cnc laser cutting machine
Purchasing a high watt cnc laser cutting machine are often value effective for prolific cutters.
If you don't understand what you propose to chop, otherwise you merely need to chop a large form of materials, a high watt optical device is best. This kind of metal laser cutting machine is powerful enough to cut and engrave nearly something, supplying you with the flexibleness you wish. However, high electrical power optical device laser cutting machines square measure usually rather more expensive valuable than entry level units. You'll be able to pay anyplace from $10,000 to $50,000 for a few models.
Ask for a quote once buying a custom-designed laser cutting machinery or custom laser cutting Prices vary wide for custom-designed laser cutting machines. belongings you take under consideration once estimating the value of your custom model square measure power, work-surface size, the kind of tube laser cutting machine and any further options you need. Generally, the larger the electric power and work-surface, the larger the worth the value. continuously discuss what options your custom model ought to have, and acquire associate itemized value quote. Or, you could build your own laser cutter.
Fiber laser cutting machine is more energy efficient, accurate and economical for most high-end industries. Fiber laser machines make more accurate cuts than more traditional CO2 lasers, and have a longer lifespan. Fiber lasers tend to be more expensive than traditional lasers, but last longer and require replacement parts and less maintenance.
The cost of laser cutting machines for sale can be very expensive. If you plan to use the machine for a single project or aren't sure you can afford one, consider hiring a cutting service and using its laser cutting machine facilities. Some will even cut your parts for you.
Depending on the cnc laser cutting machine part volume, a stamping press may supply the lowest cost per part. When speaking of metal forming in a press, however, you also are talking about the requirement of investing in tooling. Stamping also presents the ability to perform multiple tasks, such as forming and tapping, as part of the production process.
A traditional turret punch press can cut out holes and shapes economically, but it involves tooling. A punching machine also can’t match the production speeds of laser cutting machines. As with a stamping press, some forming can be done on the punch press. An abrasive waterjet also is good for thick materials and for applications in which the metal can’t have a heat-affected zone, which is a problem with most thermal cutting methods. Both plasma and water jet cutting systems cost less than metal laser cutting machine, but many times do not match the laser’s cutting speed. Of course, plasma cutting and waterjet systems can boost productivity with the use of multiple heads and the ability to cut stacked blanks; the application obviously would influence what exactly you need. More information, pls visit here.
Fucntions of fiber laser cutting machine
Advantages of fiber laser cutting machine