STRUCTURE
String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JP series has straight multi-holes from surface to the inner core, allowing maximum dirt holding capacity and lowest pressure drop. The holes are now with slope design (25micron -200micron), creating swirling flow in the filter housing, which prevent particles from settling at the bottom and provide more benifits to the water.
The whole JP washed series filters has been certified by NSF to the standard of NSF/ANSI 42.
FEATURES
• NSF listed for ANSI 42 standard
•Through slope holes create real depth filtration and swirling flow
• Large flow and small pressure loss
• High dirt holding capacity and long service life.
• Pure, clean and washed material, no silicon, no fluorescence agent and no oil.
MAIN TECHICAL SPECIFICATION
• Dimension: Outer diameter Ø63±1mm Inner diameter Ø 28mm or Ø 30mm
• Maximum operating Pressure: ()
• Temperature: 60℃(140℉)
TYPICAL APPLICATIONS
• Residential water filter
• Food & Beverage
• Pre - RO
• Pharmacy & Hospital
• High quality industrial liquid filtration
• Other applications
TABLE 1
FLOW OF FILTER CARTRIDGE
The recommended flow for the filter cartridges in service is shown in the table (L/h for a 250㎜ filter cartridge)
Micron Rate(μ m) | Viscosity | ||||
1cs(water) | 30cs | 60cs | 120cs | 250cs | |
70 | 60 | 40 | 25 | - | |
1 | 150 | 90 | 60 | 40 | - |
3 | 300 | 120 | 80 | 50 | - |
5 | 500 | 170 | 120 | 60 | 45 |
10 | 800 | 300 | 140 | 70 | 60 |
20 | 1100 | 540 | 220 | 100 | 95 |
30 | 1200 | 670 | 300 | 150 | 130 |
50 | 1200 | 880 | 440 | 180 | 160 |
75 | 1200 | 1200 | 690 | 230 | 200 |
100 | 1200 | 1200 | 750 | 270 | 220 |
Notes:
1. The flow of each 250mm(10inch)filter cartridge should not exceed 1200 L/H (317G/H), otherwise its precision may be affected.
2. The flows shown in the above table are only the recommended values. The actual flow of the filter cartridge in service may change due to the liquid nature, temperature, the nature of the eliminated particles, the contents of the particles, etc.
3. It is recommended that a new filter cartridge used in the first time should work under a pressure drop of - bar ( – ), while the final pressure drop for the filter cartridge exchange is set at bar. For the filter cartridge whose precision is lower than 10μm, the pressure drop for the filter cartridge exchange had better be set at bar ( – ).
TABLE 2
PRESSURE DROP GRAPH
*pipe pressure loss excluded.
TABLE 3
DIRT HOLD COMPARISON
TABLE 4
ORDERING INFORMATION
SF W 20- 5 P 63 P 28 JP W
A B C D
SF | Brand name |
W | Filter type- W= string wound, PP= melt blown, PPL= PP pleated, CTO= carbon block |
A | Length- 10/20/30/40, inches. 250/500/750/1000, mm. |
B | Rating- /1/3/5/10/25/50/75/100/150/200 microns |
P | Yarn material- P= polypropylene, C= cotton, PE= polyester, GF= glass fiber |
C | Outer diameter: 60/63/110/152 mm |
P | Inner core material- P= polypropylene, S= stainless steel |
D | Inner diameter- 28/30/70/100mm |
JP | Series code- JP= JP series, HF= High Flow series |
W | Additional info- W= washed pure material, L= pure pp yarn, BB= big blue |
NSF link
Raw material will be tested carefully assuring consistant quality. Following pictures are taken from our laboratory.
SF patented string wound high flow type, with OD " and 1 to 100 micron range.
STRUCTURE
In-Line Filter Cartridge is suitable for RO systems, work as pre-filter or post filter. It is made of PP shell with standard in-let and out-let. The inner filter can be carbon block, string wound, pp melt blown and carbon powder.
FEATURES
• Quick connection
• Easy replacement
• High pressure resistance
• Food grade
MAIN TECHICAL SPECIFICATION
• Connection: quick connection, thread
• Maximum operating Pressure: ()
• Temperature: 60℃(140℉)
• Maximum flow rate per 10": 4L/M ()
• Bursting pressure: (290psi)
TYPICAL APPLICATIONS
• Pre &n post RO
• Drinking water treatment
• Home use water purifier
• Odor, color, free chlorine, organic objects reduction
String wound filter made of pure material and JIS micron rates.
String wound filters made of ordinary material and JIS standard micron rates.
String wound filters using cotton or polyester string, stainless steel core, usually for cooking oil filtration.
Ordinary string wound filter, a low-cost series.
Ordinary cotton string wound filter.
Carbon block filter made of NSF certified coconut carbons.
Carbon block filter made of NSF certified coal based carbons.
Carbon block filter for industrial processing, particularly for plating industry.
Carbon block filter with heavy metal removal features, besides chlorine and organic pollutants, it also removes lead, cadmium, arsenic, copper etc, but keep healthy ions in the water.
Carbon block filters with larger OD, 10“", 20"" etc., suitable for standard big blue filter housings.
Carbon block filter made of coal carbon, low cost series.
Carbon block filter made of coal carbon with black caps.
Granular carbon filter which is also called GAC or UDF.
Melt blown (spun polypropylene) filters with 50% lower pressure drop and long service life.
Melt blown (spun polypropylene) filters with special surface treatments.
Melt blown filters with deep grooves, to improve its surface area.
Ordinary melt blown (spun polypropylene) filters, low cost sediment filter.