Polyetheramine HF-T5000
HOUFA POLYETHER AMINE T Series products are triamines prepared by reaction of PO with a triol initiator, followed by amination of the terminal hydroxyl of its characteristic structure, Polyether amine T5000 has good toughening effect in epoxy resin industry. They are exemplified by the following structure:
Specification of Hebei Houfa
Product Name |
HF-T5000 |
HF-T3000 |
HF-T403 |
|
Appearance |
|
Colorless to pale yellow transparent liquid |
||
Molecular weight Wn |
5000 |
3000 |
440 |
|
Color PHF-TCo APHA Max |
50 |
60 |
50 |
|
Primary amine |
%Min |
97 |
97 |
90 |
Amine Value |
mmol/g |
|||
Water content |
%Max |
Polyetheramine HF-D230
Product Description of Hebei Houfa
Houfa POLYETHER AMINE D Series products is our core products. They are diamine terminated PPGs (polypropylene glycol) with the following representative structure:
Specification of Polyetheramine D230
Product Name |
HF-D2000 |
HF-D400 |
HF-D230 |
|
Appearance |
Colorless to pale yellow transparent liquid |
|||
Molecular weight Wn |
2000 |
400 |
230 |
|
Color PHF-TCo APHA Max |
25 |
50 |
25 |
|
Primary amine |
%Min |
97 |
97 |
97 |
Amine Value |
mmol/g |
|||
Water content |
%Max |
Polyetheramine HF-B100
Product Description of Houfa Polyetheramine
HOUFA POLYETHER AMINE B Series is an amine of approximately 1000-2000 average molecular weight, based on the reaction of Nonylphenol and PO. Polyetheramine B100 contains a significant amount of long carbon chain as well as primary amine, which is a typical zwitterionic surfactant structure. Benefited from their special structure, they are widely used as detergent and dispersants.
Specification about Hebei Houfa
Product Name |
HF-B100 |
HF-B200 |
|
Appearance |
|
Colorless to pale yellow transparent liquid |
|
Molecular weight Wn |
1000 |
2000 |
|
Color PHF-TCo APHA Max |
50 |
75 |
|
Primary amine |
%Min |
96 |
95 |
Amine Value |
mmol/g |
||
Water content |
%Max |
Polyetheramine HF-ED900
Product Description Houfa Polyetheramine
Houfa POLYETHER AMINE ED Series products are diamines of approximately 600-2000 molecular weight, based on a PEG(PolyEthylene Glycol) backbone. The Houfa ED products have the following representative structure:
Specification
Product Name |
HF-ED2003 |
HF-ED1200 |
HF-ED900 |
HF-ED600 |
|
Appearance |
|
White waxy |
Colorless to pale yellow transparent liquid |
||
Molecular weight Wn |
2000 |
1200 |
900 |
600 |
|
Color PHF-TCo APHA Max |
75 |
75 |
100 |
75 |
|
Primary amine |
%Min |
95 |
95 |
95 |
95 |
Amine Value |
mmol/g |
||||
Water content |
%Max |
DETDA E-100
PRODUCT DESCRIPTION
DETDA E100 is equivalent to Ethancure 100 and DETDA 80, DETDA is a very effective method of polyurethane elastomer chain extender,is a kind of steric aromatic diamine chain extender, a low-viscosity, non-toxic, odorless liquid. In PU, it can enhance the product's strength and hydrolysis resistance, which enhances the production efficiency and makes the industrialization of complex PU products impossible. Quick reaction speed of DETDA and isocyanate is particularly applied to solvent-free, fast-curing coating.
DMTDA is a new type of polyurethane elastomer curing cross-linking agent, in which there are two main types of isomers of 2, 4 - and 2, 6 - dimethyl mixture of s-based toluene diamine (ratio of about 77 ~ 80/17 ~ 20), compared with the commonly used MOCA, room temperature is low viscosity liquid, can be suitable for low temperature operation,lower chemical use equivalent.
Ashless Dispersant
In case of accidental contact with skin, wash it off thoroughly with water and detergents.
HF1151 MONO POLYISOBUTYLENE SUCCINIMIDE ASHLESS DISPERSANT
Product Introduction
HF1151 is Mono Polyisobutylene Succinimide Ashless Dispersant from high reactive polyisobutylene, with excellent low temperature detergency capability and good solubility of high temperature soot. It can be widely used in modulating high-grade internal combustion engine oil. It doesn’t contain chlorine, it has preferable compatibility with detergent and antioxidant and corrosion inhibitors.
Product Technical Index
Item |
Typical value |
Test method |
Appearance |
Viscous clear liquid |
Visual inspection |
Kinematic Viscosity (100℃), mm2/s |
180 |
ASTM D445 |
Total Base Number, mgKOH/g |
50 |
ASTM D2896 |
N content, m% |
ASTM D3228 |
|
Flash Point (COC), ℃ |
200 |
ASTM D92 |
Color Number (diluted) |
ASTM D1500 |
Gasoline Detergent
In case of contact with skin accidentally, wash it off thoroughly with water and detergents.
HF1202 GASOLINE DETERGENT
Product Introduction
HF1202 gasoline detergent additive is the Mannich base type of detergent products which is produced under the cooperation of our company and Sinopec Research Institute. The product can effectively inhibit the sediment generation of gasoline engine fuel nozzles, valves, and other key parts, Keep the engine fuel system and fuel system cleaner and engine life longer as well as improve the fuel economy.
The general additive dosage is 200ppm and 400ppm. And in the national quality supervision and test center for testing of petroleum products, our product meets the GB19592 Motor Gasoline Detergent Standards Requirements.
This product can also modulate variety of engine oil circuit and lubricate system exempt opens detergent.
PAO 40
Product Description of houfa PAO Series
PAO 40 Polyalphaolefin Base Stock can be used as a base stock for a wide range of engine and industrial lubricating oil products, both mineral oil and synthetic based.
Houfa PAO 40 Polyalphaolefin Features and Benefits
High viscosity index and excellent lubricity
Excellent oxidant resistance
High flash point and low volatility
Excellent shear stability and hydrolysis
Outstanding low-temperature fluidity for enhanced blend flexibility
Compatible with mineral oils and esters
Polyether Polyols
Product Description of Houfa Polyols
National Standards for Polyether Polyols
GB/T Plastics−Polyether polyols − Part 2:Specification
GB/T Plastics − Polyether polyols − Part 3: Determination of hydroxyl value
GB/T Plastics − Polyether polyols − Part4:Determination of sodium and potassium
GB/T Plastics − Polyether polyols − Part 6:Determination of unsaturated value
GB/T Plastics − Polyether polyols − Part 7:Determination of viscosity
GB/T 22313-2008 Plastics − Polyols for use in the production of polyurethane − Determination of water content (ISO 14897:2002,IDT)
Blend Polyols
The data provided above are typical value, which are tested by our company-Hebei Houfa New Materials Co., Ltd. For our company's products, the data included in the law do not have any constraints.
Product Description of Blend Polyols For Hard Polyurethane foam
Is suitable the domain |
Product name |
Density |
Use and characteristic |
Painting |
POLY KSF-280B |
27~29 |
The breeding farm decorates the material with in |
Painting |
POLY KSF-2611B |
25~27 |
The breeding farm decorates the material with in |
Painting |
POLY KSF-FR25B |
25~27 |
The breeding farm decorates the material with in |
Painting |
POLY KSF-LT55B |
45~55 |
LNG storage tank ultralow temperature spray coating |
Painting |
POLY KSF-362B |
35~37 |
HCFC-141b system material (outside decoration) |
Painting |
POLY KSF-1280 |
25~28 |
HCFC-141b system material (in decoration) |
Painting |
POLY KSF-1300 |
30~33 |
HCFC-141b system material (outside decoration) |