Hebei Qianhui Machinery Co., Ltd

Technical Specification:

Model No.

BX1400A-8

Max Peeling Length

1300mm

Knife Length

1400mm

Max Peeling Diameter

φ360mm

Left Log Diameter

φ28mm

Peeling Thickness

Peeling Speed

20-80m/min

Motor For Rollers

x 4 sets

Motor For Feeding

11kw Servo Motor x 1 set

Control System

Inverter + PLC

Knife Table Material

Cast Steel

Gearbox Reducer Type

Hard Tooth Face Gearbox Reducer

Dimension

4000x2100x1300mm

Weight

5500kg

Key Features:

Duty:Heavy duty spindleless peeling machine, fit for eucalyptus ,rubber wood etc hardwood logs.

System:Servo motor for feeding and servo drive control ,accuracy and service life is better than normal motor and normal inverter drive.

Steel:Knife table made of cast steel,much more stronger than welding structure 

Screw Nut:Each side two screw nuts,front and rear screw nuts,which makes the feeding more stable and balance is better,and the accuracy of veneer will be much better .

Teeth Face Gearbox:Hard teeth face gearbox reducers are used for rollers and for feeding , stronger than cycloid pin wheel reducer.

Motor Power: 4 sets of motors are used to drive the rollers,which can suppler bigger force and can peel different kind of hardwood logs .

Rigidity Rollers:Rollers are quenched and chrome plated,rigidity is better and harder,service life longer .

Variable:Rollers are controlled by big inverters,the speed adjustable from 0-80m, peeling thickness range

Type Bearing Bracket: Roller bearing bracket open-design,convenient to change bearings .

Well Sealed:All bearings are attached with seals,which makes the bearings better lubricated and can be used for longer time   .

Model No.

 BX1400A-3

Max Peeling Lathe

 1300 mm

Max Peeling Diameter

 360 mm

Left Log Diameter

 26 mm

Peeling Thickness

Thickness Error

± mm

Peeling Speed

46m/min

Knife Size

1400x180x16 mm

Roller Diameter

102 mm

Roller Motors

sets, set

Feed Motor

servo motorx1 set

Control System

11kw Servo Drive

Dimension  

3500x1900x1350 mm

Weight

4500 kg

Key Features:

1. Servo System:This veneer lathe is equipped with Servo motor and 11kw Servo Drive Inverter,the control precision is much better than normal motor and normal inverters

2. Heavy Duty:The weight of this veneer lathe is 5300kg,much heavier than other model of machines,so the machines runs very stable,and the peeling precision will be very good,and this makes it suitable for peeling all kinds of hardwood logs

3. Slide pressing   bar: There are two slide pressing bars on top of the machine,to press the knife and single roller table,so as to keep them more stable when the machine working,and to keep the high precision

4. Popular in India  and Indonesia: we have agent in India and Indonesia,they are selling this model in their countries and the selling is very good,customers think highly of this machine because of its good veneer quality and good machine performance .

Rigidity Rollers:Rollers are quenched and chrome plated,rigidity is better and harder,service life longer .

6. Bearings Well Sealed :All bearings are attached with seals,which makes the bearings better lubricated and can be used for longer time .

Model No

BG2830

Working Width

2800mm

Working Length

30000mm

Working Layers

2 Layers

Drying Thickness

Length of Hot Air Room

28000mm

Length of Cold Air Room

2000mm

Drying Capacity

50cbm/24hours

Motor Power

30kw

Dimension

300000x3300x2500mm

Key Features:

This is continuous roller veneer dryer for core veneer and face veneer ,the working width and Working length can be customized according to the drying capacity you need .

Model No

BG137x270x15L

Layer Quantity

15 Layers

Hot Platen Quantity

16 pcs

Hot Platen Size

1370x2700x42 mm ,Solid Platen

Distance Between Layers

60mm

Cylinder Size

φ180x900mm

Cylinder Quantity

 2 Units

Nominal Pressure

40 KN

Hydraulic Rated Pressure

8 Mpa

Closing System

Synchronizing Close

Closing Time

15 s

Heating Medium

Thermal Oil or Steam Water

Boiler Capacity Required

Steam Boiler or 300000Kcal Oil Boiler

Temperature Required

160℃

Drying Capacity

35 m³/24 hours

Final Moisture After Dry

6%-10%

Motor Power

13kw

Frame Structure

Bolting Knockdown Type 

Operating Workers

Four Workers Can Operate Two Units Dryer

Dimension

3290x1370x2875 mm

Weight

25000 kg

Key Features:

1. This is hot press breath type veneer dryer,the hot platens are solid platens like hot press machines,and the surface of the platens are milled with grooves,so the water will come out soon after press . This structure makes it very efficient and productive,its drying capacity is 35m³/ day 24 hours .We have many customers in Indonesia and India using this type dryer .

2. Its motor power only 13kw,average electricity consumption only 5kw/ hour,so the drying cost is very low .

3. It can be heated by steam water or oil,so you can use steam boiler or oil boiler,and you can burn waste wood to heat the boilers. Cost is very low.

4. As the veneer is pressed by solid hot platens when working, so veneer will because very flat after dry, and the veneer spoil rate is very low.

is equipped with the pinion and rack balancing system to keep the machines runs smoothly

close system used ,to guarantee that all the layers close at the same time

Technical Specification:

Model No.

BY214x8/60-15

Hot Platen Size

1370x2700x42/52mm

No. of Layers

15 Layers

No. of Hot Platens

16 pcs

Layer Opening

70 mm

Main Cylinder Diameter

φ360mm

Main Cylinder Stroke

1050 mm

Main Cylinder No.

2 sets

Quick Close Cylinder Diameter

φ180 mm

Quick Close Cylinder No.

1 set

Close Time

12s

Oil Circuit Direction

Double inlet double outlet

Heating Medium

Steam Water/Thermal Oil

Nominate Pressure

6000 KN

Rated Hydraulic Pressure

25 Mpa

Hydraulic Pump Type

Aviation Pump

Dimension

3340x1400x4100 mm

Weight

28500 kg

Key Features:

Used:This 15 layers hot press is widely used in making construction plywood,decorative plywood,packing plywood, marine plywood,LVL plywood,blockboard etc.

Accuracy Hot Platens:In order to control the quality of the hot platens,we bought the complete line of machines for making hot platens,including the lathing machine,drilling machine,milling machine,boring all the hot   platens are made by ourself. The platens are flat,smooth,and thickness error less than at different positions.

Water Circuit:This hot press machine is double inlet and double outlet circuit,so the hot platens can be heated up soon,

Control System:We add the flow-valve on each layers and circulating pump to control the temperature,and the temperature will be same on different layers and will be constant at different time.

Control System:Omron PLC is applied to control the hot press machine automatically,and you can also choose to use the Manual Control model if you need.

Close System:We use a lift cylinder on this press machine,and the close speed will be faster and will take less time working efficiency will be higher.

Origin:All the cylinders we use are from Wuxi China,the best cylinders in china,it is more durable and need less maintenance.

and Hydraulic Components: We use the aviation pump on this machine and all hydraulic components are from Shanghai which use the Japanese technology.

Structure: All the side frame,beam,upper cover,bottom base are made of thick steel 30mm/40 mm,strong enough to support this pressure .

: Hot press with different size are available ,size 4x8ft,3x6ft,5x5ft,Pressure:400Tons,500Tons,600Tons,800Tons,Hot platen thickness 42mm,52mm,60mm,80mm,all available

General Instruction for the Shor Cycle Lamination Hot Press Machine：

     Pressing Thickness Range:8mm—45mm

     Capacity:about 70 sheets/hour

     Infeed Method:Belt Trolley Infeed

     Operator Required:two workers for paving the paper,one worker for inspection,and one worker for outfeed

Detailed Parts Included:

Main Press Machine

Hydraulic Station

Control Panel Box

Infeed Belt Trolley

Outfeed Trolley

Upper Oil Can

Technical Specifications:

Model

QH214x8/160-1

Nominal Pressure

16000 KN

Unit Pressure

≤

Finished Board Size

1220x2440mm

Thickness Range of the Board

8-45mm

Infeed Direction  

Horizontal

Lamination Sides

Double Size

Motor Power

Hot Platen Size

1400*2600mm

Thickness of Upper Platen

140mm

Thickness of Lower Platen

100mm

Temperature of Hot Platen 

≤200℃

Weight

41 Tons

Main Cylinder

Ф320mm×8pcs

Stroke of Main Cylinder

200mm

Lifting Cylinder

Ф63mm×4pcs

Hydraulic Pressure

 ≤25MPa

Hydraulic Oil

46# Fire Resistant Oil,6cansx170 kg/can

Technical Specification:

Model No.

QHMS 602D

Min Working Width

10mm

Max Working Width

Unlimited

Min Working Thickness

30mm

Max Working Thickness

60mm

Min Working Length

400mm

Max Working Length

2000mm

Feeding Speed

Adjustable

Motor Power

11kwx2sets

Dimension

2000x900x1400mm

Weight

900kg

Model No.

QHMS 802D

Min Working Width

10mm

Max Working Width

unlimited

Min Working Thickness

30mm

Max Working Thickness

80mm

Min Working Length

400mm

Max Working Length

2000mm

Feeding Speed

Adjustable

Motor Power

11kwx2sets

Dimension

2000x900x1400mm

Weight

920kg

Key Features:

machine head adopts HT300 casting,so the stretching strength is increased and will not deform easily

upper and lower shaft structure,multi plate   cutting discharging,improve the efficiency of 5-6 times than the band saw

company patented axis water,improve the service life of the saw

4. High quality chains for transmission

roller is lifted antomatically,easy to operate

boby is made of square steel and steel   plates,more durable

main shaft high-quality materials through   modulation,dynamicbalance,high stablility,wear resistant

Technical Specification:

Model No.

QHZY-180

Min Working Width

80mm

Max Working Width

180mm

Min Working Thickness

80mm

Max Working Thickness

170mm

Min Working Length

500mm

Max Working Length

Continuous Feed

Feeding Speed

Adjustable

Motor Power

set

Dimension

4000x1600x1300mm

Weight

1800kg

Model No.

QHZY-240

Min Working Width

100mm

Max Working Width

240mm

Min Working Thickness

100mm

Max Working Thickness

230mm

Min Working Length

700mm

Max Working Length

Continuous   Feed

Feeding Speed

Adjustable

Motor Power

30kwx2sets

Dimension

4200x1600x1600mm

Weight

2220kg

Key Features:

series log multi blade saw machines are suitable for sawing any kinds of log wood processing (diameter: than 1000mm).This series take hold in long logs processing equipment because of designed and developed with technology innovation and basis on the original log multi blade saw machines.

shaft:made of high quality materials,chromium plated,dynamic balance processing,high stability,wear resisting rust.

system:shafts core spray techinology dustproof environmental protection,saw blades protection,extend the blades lives.

main box integration,stable performance,aging treatmentdurable.

the international well-know brands SKF,dust free heating assembly,high flexible degree of main shafts,extend the blades lives.

high quality imported saw blades,heat resistant,wear resistant,deformation.

feeding.

advantage:long woods processing,for any kinds of log wood sprocessing,convenient blades handling.

.

Technical Specification:

Model No.

BM1600/BM2700/BM3200/BM4000

Grinding Length

≤1600mm/2700mm/3200mm/4000mm

Grinding Width

≤250mm

Grind Wheel Size

φ200x110xφ32mm

Worktable Rotate Angle

0-90°

Grind Head Rotate Angle

±90°

Grind Straightness Accuracy

＜

Grind Head Motor

(1440 rpm)

Moving Motor

Moving Speed

0-12m/min

Cooling Pump Motor

Dimension

3200xx1000x1250mm

Weight

1450kg/

Key Features:

knife grinder machine is mainly used in woodworking industry,paper making industry,printing industry,plastic industry,leather industry,metallurgy   industry,

can also make knife grinder for grinding knife length   until 10m

uses the electromagnetic sucker worktable,suction is homogeneous,knife will not be distorted,grinding straightness accuracy is higher.

electromagnetic sucker adopts the worm and gear drive system,driving mobility is better,angle rotating is accurate,and the big shaft structure makes it running stably.

main frame is integrated-welded,which is resistant to deformation

grinding head and sliding table is made of cast steel,the central lubrication system keeps the machines lubricated well

sliding rod is made wearable steel bar,this makes the table runs stably and   accurately.

Model No

BX260-200

Peeling Length

1900-2600mm

Peeling Diameter

180-2000mm

Peeling Thickness

Spindle Speed

30-80m/min

Spindle Diameter

100-120mm

Main Motor

22kw

Knife Table Motor

3kw

Spindle Motor

3kw x 2sets

Thickness Adjust Motor

4kw x 1 set

Dimension

5300x2300x2600mm

Weight

14000kg

Key Features:

This is 8ft spindle peeling machine for making face veneer ,its max peeling length 2600mm , max peeling diameter 2000mm,suitable for peeling keruing,teak ,poplar swing veneer collector system.

It is heavy duty machine , weight up to 14000 kg 

Model No

BX3300

Peeling Length

2800-3300mm

Peeling Diameter

180-2200mm

Peeling Thickness

Spindle Speed

30-80m/min

Spindle Diameter

100-120mm

Main Motor

55kw Variable Speed Motor

Knife Table Motor

3kw

Spindle Motor

3kw x 2sets

Thickness Adjust Motor

4kw x 1 set

Dimension

6000x2300x2700mm

Weight

14000kg

Key Features:

This is 11ft spindle peeling machine for making face veneer ,its max peeling length 3300mm , max peeling diameter 2200mm,suitable for peeling keruing,teak ,poplar swing veneer collector system.

It is heavy duty machine , weight up to 14000 kg 

Model No

BX2600A

Max Peeling Length

2600mm

Max Peeling Diameter

400mm

Left Log Core Diameter

28mm

Peeling Thickness

-3.0mm

Peeling Speed

42m/min

Roller Motors

x 4 sets

Feeding Motor

11kw Servo Motor x 1 set

Control System

15kw Servo Drive

Dimension

5600x2200x1800mm

Weight

12000 kg

Key Features:

1. Heavy Duty: The weight of this veneer lathe is up to 12000 kg,much heavier than other model of machines,so the machines runs very stable,and the peeling precision will be very good ,and this makes it suitable for peeling all kinds of hardwood logs

2. Servo System: This veneer lathe is equipped with 11kw Servo motor and 15kw Servo Drive Inverter,the control precision is much better than normal motor and normal inverters

Thickness Range: This veneer lathe can peel thin as mm   and as thick as machine will meet your demand for peeling   different kinds of veneer,core veneer and face veneer peeled in one machine.

4. Double Slide-way System: It has double sliding way system supporting the knife table,at the two ends are the surface slide system,and in the middle are the dove tail slide system supporting , so the knife table runs smoothly and stably,which will make the veneer very beautiful .

Rigidity Rollers: Rollers are quenched and chrome plated, rigidity is better and harder , service life longer .

Well Sealed :All bearings are attached with seals , which makes the bearings better lubricated and can be used for longer time .

in India and Indonesia: we have agent in India and Indonesia, they are selling this model in their countries and the selling is very good,customers think highly of this machine because of its good veneer quality and good machine performance .

Model No

BX2600B

Max Peeling Length

2600mm

Max Peeling Diameter

400mm

Left Log Core Diameter

30mm

Peeling Thickness

Peeling Speed

40m/min

Knife Table Material

Cast Steel

Gearbox Type

Hardened Surface Gearbox

Roller Motors

x 4 sets

Feeding Motor

15kw Servo Motor x 1 set

Control System

18kw Servo Drive

Dimension

5600x2200x1800mm

Weight

12000 kg

Note:

Duty:The weight of this veneer lathe is up to 14000 kg,much heavier than other model of machines,so the machines runs very stable,and the peeling precision will be very good,and this makes it suitable for peeling all kinds of hardwood logs

System:This veneer lathe is equipped with 11kw Servo motor and 15kw Servo Drive Inverter,the control precision is much better than normal motor and normal inverters

Steel:Knife table made of cast steel,much more stronger than welding structure,will not deform forever and this will guarantee the thickness accuracy

Surface Gearbox:Hardened Surface gearbox reducers are used for rollers and for feeding,stronger than cycloid pin wheel reducer.

Motor Power:4 sets of motors are used to drive the rollers,and 15kw servo motor to drive the feeding system,which can   suppler bigger torque and can peel different kind of hardwood logs 

Thickness Range:This veneer lathe can peel thin as   and as thick as machine will meet your demand for peeling   different kinds of veneer,core veneer and face veneer peeled in one machine.

Slide-way System:It has double sliding way system   supporting the knife table,at the two ends are the surface slide system,and in the middle are the dove tail slide system supporting,

so the knife table runs smoothly and stably,which will make the veneer very beautiful.

Rigidity Rollers:Rollers are quenched and chrome plated, rigidity is better and harder,service life longer.

Well Sealed:All bearings are attached with seals,which makes the bearings better lubricated and can be used for longer time .

in South East Asia:we have agent in India,Indonesia and Malaysia,they are selling this model in their countries and the selling is very good,customers think highly of this machine because of its good veneer quality and good machine performance.

                                     Machines Included In The Automatic Veneer Peeling Line 

Item

Description

Usage

Specification

1

Log Cutting Saw

To Cut The Two Ends of the logs

Working Length

1300mm

Cutting   Log Diameter

φ400 mm

Saw Blade   No. 

4 pcs

Saw Blade   Diameter

φ550mm

Motor   Power

22kw

2

Log Feeder 

To Feed Logs From Cutting Saw To Debarker 

Working Length

1300 mm

Motor   Power

3

Log Debarker

To Debark and Round The Logs 
  
 

Working Length

1300 mm

Working   Diameter

φ400 mm

Debarking   Efficiency

5s/Log

Motor   Power

19kw

Control   Method

Inverter

4

Log Feeder 
 Conveyor

To Feed Logs from Debarker to Veneer Peeling Lathe

Working Length 

1300 mm

Motor   Power

5

Veneer Lathe 
With Clipper
  
 

To Peel The Logs To Veneer and Clip the   Veneer 

Max Peeling Length

1300 mm

Max   Peeling Diameter

φ360mm

Left Log   Diameter

φ26mm

Peeling   Thickness

mm

Peeling   Speed

42m/min

Log   Species 

Hardwood

Motor   Power

6

Veneer Conveyor

To Convey The Veneer To The Veneer   Stacker

Working Width

1300 mm

Conveyor   Length

9000 mm

Convey   Speed 

30-120m/min

Motor   Power

7

Veneer Stacker 

To Grade The Second and First Grade   Veneer, Then Stack The Veneer

Worktable Size

1300x1300mm

Stacking   Speed

30-120m/min

First   Grade Veneer 

Stacked 

Second   Grade Veneer

Stacked 

Motor   Power

Key Features:

is fully automatic veneer peeling line , no need any workers , so it can save a lot of labor cost and mange cost for you .

included in this line : Log Cutting Saw , Log Debarker, Spindleless Veneer Lathe with Clipper Builtin ,Veneer Conveyor , Veneer Stacker .

motor and servo drive control,electric control system is stable and accuracy is better .

monitoring the whole production line,so you only need to monitor the whole line working at one place 

Model No.

 BX1400A-1 Patent Model

Max Peeling Lathe

 1300 mm

Max Peeling Diameter

 400/500 mm

Left Log Diameter

 26 mm

Peeling Thickness

mm

Thickness Error

± mm

Peeling Speed

46m/min

Knife Size

1400x180x16 mm

Roller Diameter

118 mm

Motor Power

2sets ,15kw 1 set , 

Servo Motor 1 set

Patent Technology

Knife Angle Can be Adjusted Automatically

Dimension  

3500x1900x1350 mm

Weight

5300 kg

Key Features:

1. Servo System: This veneer lathe is equipped with Servo motor and   11kw Servo Drive Inverter,the control precision is much better than normal motor and normal inverters

2. Heavy Duty: The weight of this veneer lathe is 5300kg,much heavier than other model of machines,so the machines runs very stable,and the peeling precision will be very good,and this makes it suitable for peeling all kinds of hardwood logs

3. Slide pressing bar: There are two slide pressing bars on top of the machine,to press the knife and single roller table,so as to keep them more stable when the machine working,and to keep the high precision

4. Knife angle   adjustable: This is our patent technology and we only use this technology on this model of veneer lathe,When the machine working and peeling wood logs,the knife angle will automatically changed when the log diameter gradually become smaller,so as to keep the thickness homogeneous and veneer appearance smooth and flatness

5. Big Diameter: The max peeling diameter of this machine is 400 mm,if need we can make it 500mm,so it can satisfy your requirements for peeling big diameter logs

6. Wide Thickness   Range: The peeling thickness of this machine is mm ,so it can satisfy your need for different thickness

7. Popular in India   and Indonesia: we have agent in India and Indonesia,they are selling this model in their countries and the selling is very good,customers think highly of this machine because of its good veneer quality and good machine performance .

Model No.

 BX1400B

Max Peeling Lathe

 1300 mm

Max Peeling Diameter

 360 mm

Left Log Diameter

 26 mm

Peeling Thickness

Thickness Error

± mm

Peeling Speed

45m/min

Knife Size

1400x180x16 mm

Roller Diameter

102 mm

Roller Motors

x 1 set

Feed Motor

  motor x 1 set

Control System

Inverter+PLC

Dimension  

3500x1900x1350   mm

Weight

4000 kg

Key Features:

1. 2 in One:Two functions veneer peeling and veneer clipping combined in one machine,so no need to buy another veneer clipping machine

Labor Cost: As the veneer will be directly cutted after peeling ,so no need one worker between clipping machine and peeling machine ,

Full Use of Wood Log: This machine can keep the last piece of veneer full size,lets say , you are peeling and cutting veneer 1270x640 ,   it can make the last piece right size 640 width ,so you can will make more   profit .

Model No.

 BX1400A

Max Peeling Lathe

 1300 mm

Max Peeling Diameter

 360 mm

Left Log Diameter

 26 mm

Peeling Thickness

Thickness Error

± mm

Peeling Speed

45m/min

Knife Size

1400x180x16 mm

Roller Diameter

102 mm

Roller Motors

x 4 sets

Feed Motor

motor x 1 set

Control System

Inverter+PLC

Dimension  

3500x1900x1350 mm

Weight

5500 kg

Key Features:

1. 2 in One:Two functions veneer peeling and veneer clipping combined in one machine,so no need to buy another veneer clipping machine

Labor Cost: As the veneer will be directly cutted after peeling ,so no need one worker between clipping machine and peeling machine ,

Full Use of Wood Log: This machine can keep the last piece of veneer full size,lets say,you are peeling and cutting veneer 1270x640,it can make the last piece right size 640 width ,so you can will make more profit .

4. Servo System:This veneer lathe is equipped with Servo motor and 11kw Servo Drive Inverter,the control precision is much better than normal motor and normal inverters

5. Heavy Duty: The weight of this veneer lathe is 5300kg,much heavier than other model of machines,so the machines runs very stable,and the peeling precision will be very good,and this makes it suitable for peeling all kinds of hardwood logs

6. Slide pressing  bar: There are two slide pressing bars on top of the machine,to press the knife and single roller table , so as to keep them more stable when the machine working,and to keep the high precision

Rigidity Rollers:Rollers are quenched and chrome plated, rigidity is better and harder,service life longer .

8. Bearings Well Sealed :All bearings are attached with seals,which makes the bearings better lubricated and can be used for longer time .