15mm 18mm plastic building formwork for concrete
Product Introduction:
Aluminium Formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology.
The popular size is 1220*2440mm, customized is welcome.
PRODUCT DETAILS
The hollow plastic building formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
support
Plastic Formwork For Column Concrete is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled within mm, and the construction requirement is better met.
production process
Hollow plastic building formwork adopts patent-initiated "double-machine co-extrusion" process, which greatly avoids the deformation caused by hot expansion and cold shrinkage, and has the incomparable advantage. The surface hardness of the product is high, friction resistance, easy form release, wide range of construction temperature, heat and cold resistance, anti-aging, non-warping, non-ing. Can withstand a variety of construction loads, products have a certain flexibility, can be used in Radian buildings, tunnels, bridges.
Advantages of plastic formwork
and weather-resistant. The machine has the advantages of high mechanical strength, no shrinkage, no moisture absorption, no wet expansion, no ing, no deformation, stable size, alkali resistance, corrosion resistance, flame-retardant waterproof, use and storage without any anti-corrosion treatment, and does not pollute the surface of the concrete.
. The stitching of formwork is strict and smooth, and the effect of pouring molding is good. The surface finish of concrete structure after demoulding far exceeds that of the existing Fair-Faced Concrete formwork, without the need of secondary plastering and saving in work and material.
and easy to install. The invention has the advantages of light weight, good toughness and strong process adaptability, can be used for sawing, planing, drilling and nail, can be used as a curved-surface special-shaped formwork, can be connected in any combination in the longitudinal direction and can be randomly formed into any geometric shape, and can meet the needs of various building forms.
and convenient demoulding. no mold release agent, only tapping the template is ok, shortening the work hour, saving the manpower, speeding up the project progress.
Installation Instructions
hollow building formwork intersecting laid with 15mm thick.
2.(1)Wood square of the distance on the surface of the intersection spacing wood square distance according to the thickness of the slab concrete in general the thickness of less than floor spacing is 200~250m. (2)The shear wall or sample using the formwork (15mm thickness spacing is 100~150mm if the shear wall pillar width more than 1 meter must add the fixed frame.
shear wall and column puzzle when leaving no gaps internal angle the bottom of the wall parts must have wood square beam wall formwork connection shear wall made 4 after the mold must be assembled into the whole hoisting then lay flat reduce labor intensity forming effect is good.
the nail to the formwork from the formwork edge distance 15~30mm strength wants moderate nail nails is 40~50mmm in length should not be too long or too short.
bottom of a piece of wood square must set aside 15 mm seam allowance wallboard made on wood square seam allowance it does not leak slurry and wallboard material saving .
More information can view Hifactory.
Hollow Plastic Formwork Board
Product Introduction:
Plastic Concrete Formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology.
PRODUCT DETAILS
The hollow plastic building formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
The hollow plastic building template is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled within mm, and the construction requirement is better met.
Aluminum Formwork For Concrete adopts patent-initiated "double-machine co-extrusion" process, which greatly avoids the deformation caused by hot expansion and cold shrinkage, and has the incomparable advantage. The surface hardness of the product is high, friction resistance, easy form release, wide range of construction temperature, heat and cold resistance, anti-aging, non-warping, non-ing. Can withstand a variety of construction loads, products have a certain flexibility, can be used in Radian buildings, tunnels, bridges.
The hollow plastic building formwork is transformed by patent technology, the two sides of the template are successfully made into a plane, the appearance of the product is more beautiful, splicing is more convenient, the slurry leakage is avoided, and the user is more convenient, safer, more time-saving and labor-saving in the construction.
Production-university docking
Our company and Chang An university College of Polymer material strong union. And we successfully developed the Nano-polymer material, applying to our plastic formwork, to improve the quality of the formwork.
Advantages of Plastic Formwork For Concrete
and weather-resistant. The machine has the advantages of high mechanical strength, no shrinkage, no moisture absorption, no wet expansion, no ing, no deformation, stable size, alkali resistance, corrosion resistance, flame-retardant waterproof, use and storage without any anti-corrosion treatment, and does not pollute the surface of the concrete.
. The stitching of formwork is strict and smooth, and the effect of pouring molding is good. The surface finish of concrete structure after demoulding far exceeds that of the existing Fair-Faced Concrete formwork, without the need of secondary plastering and saving in work and material.
and easy to install. The invention has the advantages of light weight, good toughness and strong process adaptability, can be used for sawing, planing, drilling and nail, can be used as a curved-surface special-shaped formwork, can be connected in any combination in the longitudinal direction and can be randomly formed into any geometric shape, and can meet the needs of various building forms.
Installation Instructions of Plastic Formwork Accessories
the hollow building formwork intersecting laid with 15mm thick.
2.(1)Wood square of the distance on the surface of the intersection spacing wood square distance according to the thickness of the slab concrete in general the thickness of less than floor spacing is 200~250m. (2)The shear wall or sample using the formwork (15mm thickness spacing is 100~150mm if the shear wall pillar width more than 1 meter must add the fixed frame.
shear wall and column puzzle when leaving no gaps internal angle the bottom of the wall parts must have wood square beam wall formwork connection shear wall made 4 after the mold must be assembled into the whole hoisting then lay flat reduce labor intensity forming effect is good.
the nail to the formwork from the formwork edge distance 15~30mm strength wants moderate nail nails is 40~50mmm in length should not be too long or too short.
bottom of a piece of wood square must set aside 15 mm seam allowance wallboard made on wood square seam allowance it does not leak slurry and wallboard material saving.
More information can view Hifactory.
Practical Hollow Plastic Building Formwork
Product Introduction:
Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What’s more, its amortization cost is very low.
The hollow plastic building formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
The Plastic Formwork Column is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled within mm, and the construction requirement is better met.
Hollow plastic building formwork adopts patent-initiated "double-machine co-extrusion" process, which greatly avoids the deformation caused by hot expansion and cold shrinkage, and has the incomparable advantage. The surface hardness of the product is high, friction resistance, easy form release, wide range of construction temperature, heat and cold resistance, anti-aging, non-warping, non-ing. Can withstand a variety of construction loads, products have a certain flexibility, can be used in Radian buildings, tunnels, bridges.
The Eco-friendly Hollow Plastic Building Formwork is transformed by patent technology, the two sides of the template are successfully made into a plane, the appearance of the product is more beautiful, splicing is more convenient, the slurry leakage is avoided, and the user is more convenient, safer, more time-saving and labor-saving in the construction.
Production-university docking
Our company and Chang An university College of Polymer material strong union. And we successfully developed the Nano-polymer material, applying to our plastic formwork for construction, to improve the quality of the formwork.
Advantages of plastic formwork
and weather-resistant. The machine has the advantages of high mechanical strength, no shrinkage, no moisture absorption, no wet expansion, no ing, no deformation, stable size, alkali resistance, corrosion resistance, flame-retardant waterproof, use and storage without any anti-corrosion treatment, and does not pollute the surface of the concrete.
. The stitching of formwork is strict and smooth, and the effect of pouring molding is good. The surface finish of concrete structure after demoulding far exceeds that of the existing Fair-Faced Concrete formwork, without the need of secondary plastering and saving in work and material.
and easy to install. The invention has the advantages of light weight, good toughness and strong process adaptability, can be used for sawing, planing, drilling and nail, can be used as a curved-surface special-shaped formwork, can be connected in any combination in the longitudinal direction and can be randomly formed into any geometric shape, and can meet the needs of various building forms.
maintenance. Practical Hollow Plastic Building Formwork does not absorb water, does not , does not deform, alkali-resistant anticorrosion, flame retardant and waterproof, does not require special protection or storage. Saving the cost of post-storage and maintenance.
Installation Instructions
the hollow building formwork intersecting laid with 15mm thick.
2.(1)Wood square of the distance on the surface of the intersection spacing wood square distance according to the thickness of the slab concrete in general the thickness of less than floor spacing is 200~250m. (2)The shear wall or sample using the formwork (15mm thickness spacing is 100~150mm if the shear wall pillar width more than 1 meter must add the fixed frame.
shear wall and column puzzle when leaving no gaps internal angle the bottom of the wall parts must have wood square beam wall formwork connection shear wall made 4 after the mold must be assembled into the whole hoisting then lay flat reduce labor intensity forming effect is good.
the nail to the formwork from the formwork edge distance 15~30mm strength wants moderate nail nails is 40~50mmm in length should not be too long or too short.
bottom of a piece of wood square must set aside 15 mm seam allowance wallboard made on wood square seam allowance it does not leak slurry and wallboard material saving .
More information can view Hifactory.
Plastic formwork replacement plywood for construction
Product Introduction:
Smooth Hollow Plastic Building Formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology.
It can reuse over 50 times.
PRODUCT DETAILS
Customized Hollow Plastic Building Formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What’s more, its amortization cost is very low.
The hollow plastic building formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
The Plastic Construction Formwork is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled within mm, and the construction requirement is better met.
Our company and Chang An university College of Polymer material strong union. And we successfully developed the Nano-polymer material, applying to our plastic formwork, to improve the quality of the formwork.
Hollow plastic building formwork adopts patent-initiated "double-machine co-extrusion" process, which greatly avoids the deformation caused by hot expansion and cold shrinkage, and has the incomparable advantage. The surface hardness of the product is high, friction resistance, easy form release, wide range of construction temperature, heat and cold resistance, anti-aging, non-warping, non-ing. Can withstand a variety of construction loads, products have a certain flexibility, can be used in Radian buildings, tunnels, bridges.
Advantages of Plastic Formwork Board
and weather-resistant. The machine has the advantages of high mechanical strength, no shrinkage, no moisture absorption, no wet expansion, no ing, no deformation, stable size, alkali resistance, corrosion resistance, flame-retardant waterproof, use and storage without any anti-corrosion treatment, and does not pollute the surface of the concrete.
. The stitching of formwork is strict and smooth, and the effect of pouring molding is good. The surface finish of concrete structure after demoulding far exceeds that of the existing Fair-Faced Concrete formwork, without the need of secondary plastering and saving in work and material.
and easy to install. The invention has the advantages of light weight, good toughness and strong process adaptability, can be used for sawing, planing, drilling and nail, can be used as a curved-surface special-shaped formwork, can be connected in any combination in the longitudinal direction and can be randomly formed into any geometric shape, and can meet the needs of various building forms.
maintenance. Hollow plastic formwork does not absorb water, does not , does not deform, alkali-resistant anticorrosion, flame retardant and waterproof, does not require special protection or storage. Saving the cost of post-storage and maintenance.
Installation Instructions
the Hollow Plastic Building Templates intersecting laid with 15mm thick.
2.(1)Wood square of the distance on the surface of the intersection spacing wood square distance according to the thickness of the slab concrete in general the thickness of less than floor spacing is 200~250m. (2)The shear wall or sample using the formwork (15mm thickness spacing is 100~150mm if the shear wall pillar width more than 1 meter must add the fixed frame.
shear wall and column puzzle when leaving no gaps internal angle the bottom of the wall parts must have wood square beam wall formwork connection shear wall made 4 after the mold must be assembled into the whole hoisting then lay flat reduce labor intensity forming effect is good.
the nail to the formwork from the formwork edge distance 15~30mm strength wants moderate nail nails is 40~50mmm in length should not be too long or too short.
bottom of a piece of wood square must set aside 15 mm seam allowance wallboard made on wood square seam allowance it does not leak slurry and wallboard material saving .
More information can view Hifactory.
Reusable 60 times 18mm plastic hollow formwork for tall building
Product Introduction:
Plastic Formwork For Construction is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology.
It can replace wood plywood totally, reusable over 50 times, light weight, easy install and fall off
PRODUCT DETAILS
Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What’s more, its amortization cost is very low.
The hollow plastic building formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
The hollow plastic construction formwork is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled within mm, and the construction requirement is better met.
docking
Our company and Chang An university College of Polymer material strong union. And we successfully developed the Nano-polymer material, applying to our plastic formwork, to improve the quality of the formwork.
Hollow plastic building formwork adopts patent-initiated "double-machine co-extrusion" process, which greatly avoids the deformation caused by hot expansion and cold shrinkage, and has the incomparable advantage. The surface hardness of the product is high, friction resistance, easy form release, wide range of construction temperature, heat and cold resistance, anti-aging, non-warping, non-ing. Can withstand a variety of construction loads, products have a certain flexibility, can be used in Radian buildings, tunnels, bridges.
Advantages of plastic formwork
and weather-resistant. The machine has the advantages of high mechanical strength, no shrinkage, no moisture absorption, no wet expansion, no ing, no deformation, stable size, alkali resistance, corrosion resistance, flame-retardant waterproof, use and storage without any anti-corrosion treatment, and does not pollute the surface of the concrete.
. The stitching of formwork is strict and smooth, and the effect of pouring molding is good. The surface finish of concrete structure after demoulding far exceeds that of the existing Fair-Faced Concrete formwork, without the need of secondary plastering and saving in work and material.
and easy to install. The invention has the advantages of light weight, good toughness and strong process adaptability, can be used for sawing, planing, drilling and nail, can be used as a curved-surface special-shaped formwork, can be connected in any combination in the longitudinal direction and can be randomly formed into any geometric shape, and can meet the needs of various building forms.
maintenance. Hollow formwork plastic does not absorb water, does not , does not deform, alkali-resistant anticorrosion, flame retardant and waterproof, does not require special protection or storage. Saving the cost of post-storage and maintenance.
More information can view Hifactory.
12mm 18mm 1220*2440mm plastic formwork
Product Introduction:
Eco-friendly Hollow Plastic Building Formwork, it is a kind of energy-saving and green environmental protection product,
Eco-friendly, light weight, easy install and fall off
It can replace wood plywood formwork totally and reuse over 50 times.
PRODUCT DETAILS
12mm 15mm 18mm Hollow plastic building formwork
Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What’s more, its amortization cost is very low.
Practical Hollow Plastic Building Formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
The hollow plastic building template is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled within mm, and the construction requirement is better met.
docking
Our company and Chang An university College of Polymer material strong union. And we successfully developed the Nano-polymer material, applying to our plastic formwork, to improve the quality of the formwork.
Hollow plastic building formwork adopts patent-initiated "double-machine co-extrusion" process, which greatly avoids the deformation caused by hot expansion and cold shrinkage, and has the incomparable advantage. The surface hardness of the product is high, friction resistance, easy form release, wide range of construction temperature, heat and cold resistance, anti-aging, non-warping, non-ing. Can withstand a variety of construction loads, products have a certain flexibility, can be used in Radian buildings, tunnels, bridges.
Advantages of Smooth Hollow Plastic Building Formwork
and weather-resistant. The machine has the advantages of high mechanical strength, no shrinkage, no moisture absorption, no wet expansion, no ing, no deformation, stable size, alkali resistance, corrosion resistance, flame-retardant waterproof, use and storage without any anti-corrosion treatment, and does not pollute the surface of the concrete.
. The stitching of formwork is strict and smooth, and the effect of pouring molding is good. The surface finish of concrete structure after demoulding far exceeds that of the existing Fair-Faced Concrete formwork, without the need of secondary plastering and saving in work and material.
and easy to install. The invention has the advantages of light weight, good toughness and strong process adaptability, can be used for sawing, planing, drilling and nail, can be used as a curved-surface special-shaped practical Hollow plastic building formwork, can be connected in any combination in the longitudinal direction and can be randomly formed into any geometric shape, and can meet the needs of various building forms.
maintenance. Hollow plastic formwork does not absorb water, does not , does not deform, alkali-resistant anticorrosion, flame retardant and waterproof, does not require special protection or storage. Saving the cost of post-storage and maintenance.
More information can view Hifactory.
Plastic B&D cone for Form tie
Product Introduction:
Plastic cone with washer and nut for B & D form tie for formwork fastener
Two kinds of D cone ,one is with the plastic part ,the other one is ont
L=35mm/40mm
D=1/2" or 12mm
Used with form tie,B cone,form tie to fix formwork
PRODUCT DETAILS for Construction Flange Clamp
Plastic cone D cone B cone
Sample:
Free sample for testing
Packaging:
Usually carton with pallet, or as your demands.
As a professional manufacturer and supplier of Construction material plastic fitting from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Scaffolding Systems Scaffolding Accessories, Formwork and Formwork Accessories, Plastic construction fittings Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Construction Permanent Steel Mesh Hy-Ribbed Formwork sheet
Product Introduction:
Tie Rod Rapid Clamp Tensioner has excellent engineering quality, construction security and widely used in tunnels bridges, valve basement systems, sewage systems, subways, retaining walls, nuclear power plants, shipyards, water pools and marine engineering works and high rise building projects and non-regular or bending pattern etc. as concrete permanent assembly-free formwork.
PRODUCT DETAILS
Construction Permanent Steel Mesh Hy-Ribbed Formwork sheet
1). Construction formwork mesh has very good engineering quality and construction security;
2). Construction formwork mesh as the concrete permanent assembly
free sheet is much convenient for engineering design and processing;
3). Construction formwork mesh is widely used in tunnels, bridges and valve system and so on
to make the process of construction much more fast and stable.
Usually10 Pcs per Bundle, 50 bundle per pallet, 12 Pallets per 20GP or Customized.
As a professional manufacturer and supplier of construction hardware from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Scaffolding Systems Scaffolding Accessories, Formwork and Formwork Accessories, Plastic fittings in building Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Flat Form Tie
Product Introduction:
Concrete wall ties and accessories are manufactured to meet the requirements of today's various pouring methods. They are made of high quality steel with galvanized or black surface. With the continually perform quality control testing to ensure that all of our ties yield a minimun pull strength. it is used on Korea construction. it is cold-drawn flat tie. we can supply 100L to 1200L flat tie.
More information can view Hifactory.
hot rolled tie rod 15/17 Dywidag tie rod Formwork tie rod formwork material
Product Introduction:
Steel Formwork Accessories Wall Tie Rod for Construction is used in industrial as well as housing sectors.
PRODUCT DETAILS
Steel Formwork Accessories Wall Tie Rod for Construction 15/17mm
Name |
Formwork Tie Rods 16mm |
Material |
Carbon Structural Steel Q235/45# |
Process |
Thread rolling |
Length |
1-6m or customized |
Weight |
|
Failing loading |
≥ |
Surface treatment |
Original , electro galavanied or as your requirement |
More information can view Hifactory.
Construction accessories plastic fittings reabr rubber plug
Product Introduction:
Construction accessories plastic fittings reabr rubber plug
PRODUCT DETAILS
Product name:Reabr rubber Plug
Material: rubber & plastic
OD:20MM; 22MM; 26MM; 30MM
Usage: Protect the rebar
As a professional manufacturer and supplier of construction hardware from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:plastic formwork system Scaffolding Accessories, Formwork and Formwork Accessories, Plastic construction fittings Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Flexible plastic fittings in building plastic ladder spacers
Product Introduction:
Flexible plastic fittings in building plastic ladder spacers
PRODUCT DETAILS
Product name:Plastic Ladder Spacer
Material: PP, PE, PVC
Usage: Prop up the rebar
As a professional manufacturer and supplier of construction hardware from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Scaffolding Systems Scaffolding Accessories, Formwork and Formwork Accessories, Plastic construction fittings Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Concrete Plastic Fittings Plastic Wheel Spacer
Product Introduction:
Concrete Plastic Fittings Plastic Wheel Spacer
PRODUCT DETAILS
Product name:Plastic Wheel Spacer
Material: PP, PE, PVC
Usage: ProtactIing the rebar
As a professional manufacturer and supplier of plastic construction formwork from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Scaffolding Systems Scaffolding Accessories, Formwork and Formwork Accessories, Construction material plastic fitting Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Recycled PE Black Color Plastic Spacer
Product Introduction:
Manufacturer Cheap Concrete Material Recycled PE Black Color 40 and 50 Plastic Spacer
PRODUCT DETAILS
We offer various types and sizes of this kind spacer. And we also can produce the item according to the clients' sample or drawing.
As a professional manufacturer and supplier of construction hardware from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Construction materialScaffolding ,Systems Scaffolding Accessories, Formwork and Formwork Accessories, Plastic construction fittings Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Construction material plastic fitting rebar safety cap
Product Introduction:
Construction material plastic fitting rebar safety cap
PRODUCT DETAILS
Construction material plastic fitting rebar safety cap
As a professional manufacturer and supplier of formwork accessories plastic from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Scaffolding Systems Scaffolding Accessories,Formwork and construction plastic fittings Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Building material plastic fittings for rebar square safety end cap
Product Introduction:
Rebar Protection Caps provide scratch protection when working around in-place rebar. They only help protect workers against minor injuries caused by exposed rebar or pipes.
PRODUCT DETAILS
Building material plastic fittings for rebar square safety end cap
As a professional manufacturer and supplier of Construction material from China, offering the high quality products worldwide. Depending on the professional QC personnel, all the processes, including casting, forging, stamping, welding and surface finishing, are well controlled. Taking the advantages of our in-house manufacturing facilities and rational cost control, our price is very Main Products:Scaffolding Systems Scaffolding Accessories, Formwork and Formwork Accessories, Plastic construction fittings Based on our producing ability -- Autonomous producing, processing with customers' samples or designs and operation principle -- sincerity, coordination and value promotion, we keep steady and long-term cooperation with customers at home and new and old clients to visit our company for business negotiation. The Management & Staff members of Hebei Trico are sincerely expecting to be at your service.
More information can view Hifactory.
Building material scaffold fittings drop forged fixed girder coupler
Product Introduction:
Scaffolding Coupler or scaffolding clamp is the main part of the tubular scaffolding system, it plays a fasten and connection functions in system. Simple structure and big loading power, make couplers easier and widely used on construction project. Scaffolding couplers include swivel and fixed coupler, forged and pressed coupler, etc. Different couplers have their own unique characteristics and be used in different construction situations.
Scaffolding Gravlog Coupler
Building Material Scaffold Fittings
Product Name |
Type |
size |
Unit Weight |
Scaffolding Gravlog Coupler |
Forged steel coupler |
Easy maintenance. Because couplers themselves are not easy to rust and break, maintenance is very convenient after use, which not only reduces the difficulty of maintenance, but also saves the maintenance cost, reduces the manpower and material resources of maintenance, and increases the efficiency and quality of construction.
Strong corrosion resistance. After passivation and galvanizing, the anti-rust ability of the whole piece is greatly improved, and its service life is long, far exceeding the service life of pressed couplers.
Strong resistance to stripping. With the new connection, the new nut ensures that the pressed couplers can be fixed vertically and firmly in the case of steel tube deformation, eliminating the possibility of steel tube slippage.
Strong anti-deformation ability. Compared with the ordinary pressed couplers, because of the different manufacturing process, it breaks through the limitation of traditional stamping process on material thickness, which can completely guarantee the non-deformation in the use process, thus ensuring the safety and reuse of products. The right angle couplers can ensure the good performance and use, and ensure the normal use of couplers in construction.
Couplers have safety advantages and quality advantages. This kind of fastener has good product advantages and can show good advantages in construction, so the unique characteristics of scaffolding couplers make them more widely used in construction.
Five Promises about Scaffolding Casting Steel Ledger End:
: Strictly control the quality through three levels. First level, quality test on the producing line. Second level, quality test during warehousing. Third level, quality test before loading.
: 24 hours consulting and quotation services for customers all the time.
: Strictly follow the customer standard to ensure the tolerance range and meet customer's requirement.
: If The customer complains about the quality of the products, our company will actively cooperate with them to solve the problem. If it is the responsibility of our company, we will bear the corresponding responsibility and compensation.
: Establish good long-term relationship with customers.
More information can view Hifactory.
British punched ladder coupler
Product Introduction:
Scaffolding Coupler or scaffolding clamp is the main part of the tubular scaffolding system, it plays a fasten and connection functions in system. Simple structure and big loading power, make couplers easier and widely used on construction project. Scaffolding couplers include swivel and fixed coupler, forged and pressed coupler, etc. Different couplers have their own unique characteristics and be used in different construction situations.
British punched ladder coupler
Product Name |
Type |
Size |
Unit Weight |
Material |
British punched ladder coupler |
Forged steel coupler |
Q235 |
Easy maintenance. Because couplers themselves are not easy to rust and break, maintenance is very convenient after use, which not only reduces the difficulty of maintenance, but also saves the maintenance cost, reduces the manpower and material resources of maintenance, and increases the efficiency and quality of construction.
Strong corrosion resistance. After passivation and galvanizing, the anti-rust ability of the whole piece is greatly improved, and its service life is long, far exceeding the service life of pressed couplers.
Strong resistance to stripping. With the new connection, the new nut ensures that the pressed couplers can be fixed vertically and firmly in the case of steel tube deformation, eliminating the possibility of steel tube slippage.
Ring Lock Scaffolding Rosette have safety advantages and quality advantages. This kind of fastener has good product advantages and can show good advantages in construction, so the unique characteristics of scaffolding couplers make them more widely used in construction.
Strong anti-deformation ability. Compared with the ordinary pressed couplers, because of the different manufacturing process, it breaks through the limitation of traditional stamping process on material thickness, which can completely guarantee the non-deformation in the use process, thus ensuring the safety and reuse of products.
Five Promises:
: Strictly control the quality through three levels. First level, quality test on the producing line. Second level, quality test during warehousing. Third level, quality test before loading.
: 24 hours consulting and quotation services for customers all the time.
British Punched Ladder Coupler: Strictly follow the customer standard to ensure the tolerance range and meet customer's requirement.
: If The customer complains about the quality of the products, our company will actively cooperate with them to solve the problem. If it is the responsibility of our company, we will bear the corresponding responsibility and compensation.
: Establish good long-term relationship with customers.
More information can view Hifactory.
Scaffolding Casting Steel Ledger End of Ringlock System
Product Introduction:
Ringlock scaffolding also named wheel disc scaffolding,Into disc scaffolding,buckle disc scaffolding,Chrysanthemum buckle type scaffold,layer frame(layer frame develped by Layer company in germany,mainly used on the large-scale concerts' light frame or background frame).
Item |
Ring lock scaffolding ledger end |
Material |
ZG25/ZG35/20SiMn/etc |
Dimensions |
, or as your demands |
Surface |
Hot-dip galvanization/ electric galvanization /or as your request |
Standard |
JIS,ISO9001:2008 |
Note |
OEM service is available |
MOQ |
1000pieces |
Package |
in plate or plywood box, or as your request |
Payment Terms |
TT,L/C, we can contact in detail |
Delivery Time |
20-30days |
More information can view Hifactory.
Ring lock Scaffolding Rosette
Product Introduction:
Ringlock Scaffolding System Include:Vertical System and guard safe can be used for building support and building face decoration.
Ring lock Scaffolding Rosette Round Ring
Production engineering: Forging process
Material: Steel
Thickness: 6mm; 8mm; 10mm
Properties: Connecting the ringlock scaffolding tubes
Features:
Can be quickly erected,just need a hammer to erect,save labour cost.
Convenient transportation and storage.
Low maintenace,The hot dip galvanized finish will last life of it,No paint required.
No more rust or corrosion,even it can be stored externally.
Five Promises:
: Strictly control the quality through three levels. First level, quality test on the producing line. Second level, quality test during warehousing. Third level, quality test before loading.
: 24 hours consulting and quotation services for customers all the time.
: Strictly follow the customer standard to ensure the tolerance range and meet customer's requirement.
Iron Core Scaffolding Rubber Caster Wheel: If The customer complains about the quality of the products, our company will actively cooperate with them to solve the problem. If it is the responsibility of our company, we will bear the corresponding responsibility and compensation.
: Establish good long-term relationship with customers.
More information can view Hifactory.