Jindal Medi Surge Angled blade plates were designed by the various angled blade plate manufacturer for the fixation of proximal and distal femoral fractures. Later osteotomy plates with different angles were introduced. All angle blade plates are of one-piece construction with a fixed angle between blade and shaft. The fixed angle makes the implant less susceptible to corrosion and increases the strength of the implant. A further benefit of the fixed angle is the possibility of accurate placement of the plate in osteotomies. Angled blade plates with 95⁰ and 130⁰ angles are mainly used for fixations of fracture. Osteotomy plates of different angles are available in sizes for both adolescents, adults, children, and infants. The blade of the plates for adults has a U-cross-section, that provides high strength with minimum bone displacement. Angle blade plates for adolescents, small adults, children, and infants have a T-shaped blade cross-section. Though sharp at the tip, the seat of the blade must be prepared with a seating chisel with the corresponding cross-section. The shaft of the plate is slightly thicker than that of the broad, straight plate and can withstand higher stresses. The dynamic compression holes are arranged in an offset mode, same as the straight broad plates. These holes accept mm cortex screws; the round holes in some kinds of plates will accept mm cancellous bone screws. for axial compression of fractures of the femur, it is often essential to use the articulated tension device instead of the self-compressing DCP holes. Because of its special design, the insertion of the angled blade plate requires great precision. Preoperative planning is necessary to determine the exact placement of the plate. The blade must be accurately placed in both the frontal and sagittal planes, and the shaft must line up with the axis of the femur. The anatomical landmarks must be known, and guide wires inserted for orientation at the time of surgery. Misplacement of the plate may lead to valgus, varus, or rotational deformities. All plates are available in , LVM & Ti. Alloy.
The Herbert screw (invented by Timothy Herbert) is a variable pitch cannulated screw typically made from titanium for its stainless properties as the screw is normally intended to remain in the patient indefinitely. It became generally available in 1978. It is also called as headless compression screw and is used to achieve interfragmentary compression through its differential pitch (distance between adjacent threads of screw). It is used in scaphoid, capitellum, radial head and in osteochondral fractures. Other uses include osteochondritis dissecans & small joint arthrodesis.
Jindal Medi Surge are OEM / BRAND manufacturers of high quality Large Cannulated Cancellous Screw System which is intended for fixation of fractures, fusions, and osteotomies of large and small bones and consists of screws, washers, and accessories. The system comprises partially or fully threaded screw implants using a cancellous thread form. The partially threaded screws can be used to “lag” one bone fragment to another where the bone fragment is captured by the threads of the screw and pulled toward the fragment piece closest to the headed end of the screw. Fully Threaded screws are intended to stabilize fractures where little to no compression across the fracture site is needed. All screw are available in , LVM & Ti. Alloy.
Jindal Medi Surge's Large Fragment Implants and Instruments are used to fix fractures of various long bones, such as Humerus, Femur and Tibia. These are also used in fixation of Periprosthetic fractures, Osteopenic bone and fixation of Non-unions or Malunions in adult patients. Large Fragment System comprises Safety Locking and Standard implants and Plates are classified according to their functions. All implants are available in , LVM & Ti. Alloy.
Oral and maxillofacial surgery specializes in treating many diseases, injuries and defects in the head, neck, face, jaws and the hard and soft tissues of the oral and maxillofacial region. It is an internationally recognized surgical specialty.
We are Mini Fragment Implants Manufacturers and Suppliers in India, Internal fixation of fractures in the foot and the hand has gained favour in recent years. The goal of providing the stability required for early postoperative mobilization in large bones also applies to smaller bones. The same basic principles of stable internal fixation and open reduction apply, only the size of implants varies. The trend toward using small implants has led to the development of many different sizes and types. All the implants are now available in stainless steel as well as in titanium. The implants are delicate as are the instruments required for their application. They are designed to be handled with skill, not the force. The mini fragment screws, , , and mm cortex screws, are used as plate fixation screws or as lag screws. In small-sized bones the cancellous bone is rather dense, allowing the use of cortex screws also in the epiphyseal and metaphyseal areas. Now, mm and mm locking head screws are also available in Star Head Drive. mm and mm Locking plates are available only in titanium.
indal Medi Surge's Pins are used in fixation of fractures where minimal bone and soft tissue damage are involved, they provide provisional fixation leaving room for additional hardware placement. The provisional fixation is planned to avoid faulty permanent fixation. Depending on the diameter, pins may also be used as guide wires for cannulated screw fixation. Jindal Medi Surge are manufacturer's of widest range & sizes of Wire Implants, used in various trauma/orthopedic surgeries. All Wires are made from raw material. Jindal Medi Surge's Staples are used for fragment fixation, where inter-fragmental screw fixation is difficult. They are an effective internal fixation method and are widely used in foot and ankle surgery. The staples are also used in fixation of soft tissues to bone.
Jindal Medi Surge is leading OEM / Brand manufacturer of Orthopedic Bone Screw. We are having wide range in Orthopedic Bone Screw like Small Cannulated Cancellous Screws , mm Dia Full Thread - Self Tapping. All product are available in Ti. 5G, & LVM. All products are designed under the Machinery 5 Axis, VMC & CNC. All sizes are available in best quality & reasonable prices.
Jindal Medi Surge are actively engaged in manufacturing wide range of orthopedic implants and instruments thereby enabling us to offer small fragment implants and instruments also. Under Small fragment implants, we manufacture, cortical screw, cortical screw self tapping, cancellous screws short threaded, cancellous screws fully threaded, washer for cancellous screws, one third tubular plate with collar, calcaneal plate, one third tubular plate, dcp plate, small t plate, straight pelvic reconstruction plate, clavicle plate, curved reconstruction plate, small t plate oblique angled for right and left radius, y reconstruction plate, lcp-dcp, cloverleaf plate and hook plate. In addition, we also manufacture instruments for small fragment including drill bit – quick coupling end, bone tap quick coupling end, drill bit – plain shank, bone tap with t-handle, hexagonal screwdriver, small plate bender, plate bender for reconstruction plate, small depth gauge, quick coupling handle, counter sink with t-handle, quick coupling adaptor for drill bit, tap sleeve, guide wire introducer with four pegs, k. wire bender, wire passer, plier cum wire bender, flat nose plier, triple drill guide, wire cutter, steinmann pin introducer with chuck & key, bone awl forceps, hohmann retractor and much more. All Implants are available in Medical Grade , LVM, Ti. Alloy.
Jindal Medi Surge Mini Fragment Locking System contains the mm and mm locking implants and related instruments required for locked plating. Features Dedicated equipment designed for LCP plating Locking instruments fit in standard instrument case. The Locking System consists of: Mini Fragment Locking Instrument Set, Mini Fragment Locking Implant Set. All Implants are available in , LVM & Ti. Alloy.
Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.
Jindal Medi Surge has a wide range of External Fixators made from Carbon Fiber Material (which is a great alternative to Stainless Steel as it is lighter & stronger). Our products are precisely engineered & are used for External Fixation in Humans (Adult / Pediatric) & Veterinary. All the products are categorized as following:-
Joint calcaneal, bone, and other distractors are used during orthopedic surgical procedures to separate two joint surfaces while protecting ligaments. Popular patterns include Calcaneal, Caspar bodies and blades, Kaufman, Femur, Sereff ankle distractors, small bone distractors, and pin distractors. Jindal Medi Surge are OEM / Brand Manufacturer of the said devices, available in Stainless Steel & Titanium Alloy.
Jindal Medi Surge are manufacturers of widest and the highest quality Rail & Dynamic External Fixators from Medical Grade Aluminium. Rail & Dynamic Fixators are used in Trauma Surgeries for both Adult & Pediatric cases. All Fixators are made from Aluminium HE30 Hard Anodized Top Medical Grade.
External fixation is a well-established technique for stabilizing a variety of fractures. The Jindal Medi Surge External Fixation System provides innovative fracture management solutions for the upper extremities through a dedicated line of external fixators. From our distal radius fracture system, to our innovative small bone fixation and distraction units, each system has been designed to provide ease of application, stability, and fracture reduction. All Fixators are available in Medical Grade Stainless Steel, Aluminium & Titanium Alloy.
