Medanelectronic

Komodo Features:

• The Komodo RTR body is fully trimmed and finished in a dark grey finish, and when the included scale accessories are added, it gives the body a realistic look that cannot be matched by other RTR scalers.
• G-Transition Aluminum Oil Shocks with Internal Springs
• MT-1903 x " Tires & NR02 Beadlock Wheels with Center Hubs
• Full Time 4WD
• One Piece Graphite Axle Housings & Metal Gear Covers
• Solid Spool Locked Differentials
• Dust Proof Transmission
• Metal Motor Mount
• Full Bearings
• Universal Driveshafts

Specifications:
Width: 236mm
Height: 247mm (with roof rack)
Length: 506mm
Wheelbase: 287mm
Ground Clearance: 65mm
Weight: kg (no electronics)

Needed to Complete:

• NiMH - LiPo Battery & Compatible Charger
• AA Batteries for Transmitter

Specifications: 

Width: 290mm ( inch)
Height: 190mm ( inch)
Length: 440mm ( inch)
Wheelbase: 310mm ( inch)
Wheels: 56mm ( inch) Dual side beedlock wheels
Tire Height: 136mm ( inch)
Tire Width: 59mm ( inch)
Tire Inner Diameter: 56mm ( inch)
Axle Ground Clearance: 55mm ( inch)
Center Ground Clearance (Droop Set-up): 75mm (3 inch)
Center Ground Clearance (Sprung Set-up): 95mm ( inch)

Needed To Complete:

• NiMH or LiPo Battery pack with T-style connector & compatible battery charger 
• AA Batteries for the transmitter

Specifications: 

Chassis: " (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Muffler: High-flow tuned
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 FHSS radio system with failsafe
Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, seconds/60°, SF-20W throttle servo
Body: Pre-painted custom polycarbonate body panels
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH
Ball Bearings: Full set
Wheels: Front x " (119 x 61mm), rear x 3" (119 x 76mm) with beadlock mount
Tires: HB Rodeo SC
Wheelbase: " (571mm)
Ground Clearance: " (61mm)

Includes:

• Baja 5B Sidewinder Sand Rail SX5 Buggy w/Kraken RC Sidewinder X5 Conversion
• K26 Gasoline Engine
• 3-ch Radio
• Steering & Throttle Servos
• 100cc bottle of 2-Stroke Oil
• RX Battery
• Instruction Manual

Features:

• Factory-assembled Ready-To-Run large scale gas-powered buggy
• Fitted with HPI105409 D-Box 2 Adjustable Stability Control System
• Latest Heavy-Duty drivetrain option parts installed
• Updated paint scheme
• FHSS radio system with failsafe
• Extra-thick aluminum monocoque chassis
• Powerful 23cc 2-stroke engine
• Torx T27 engine screws
• 700cc fuel tank provides 45 minutes of driving
• High flow muffler
• 8,000 RPM performance clutch
• VVC/HD externally adjustable shock absorbers
• Long-travel extra-durable suspension
• Viscous torque differential
• All-terrain racing tires
• Super-durable real beadlock wheels
• Long wheelbase
• Enclosed radio box
• External battery charging plug
• Adjustable heavy duty racing rear wing
• Durable roll cage protects engine
• Gunmetal anodizing for super-cool looks
• Complete set of ball bearings
• 100cc of 2-stroke oil included
• 6V 3000mAh receiver pack and wall charger included
• 4 AA batteries for transmitter included

Includes:

• Pre-Assembled 1/5th scale 2WD buggy
• Fuelie 23cc gasoline engine
• DSSS radio system
• 6V receiver battery & multi region charger
• Painted body
• Comprehensive instruction manual

Needed to Complete:

• Pump Gasoline
• Fuel Can

Features:

• Factory-assembled Ready-To-Run large scale gas-powered muscle car
• Fitted with pre-painted officially licensed 1970 Ford Boss Mustang large scale body
• Beadlock 8-spoke satin chrome wheels fitted with black heavy duty beadlock rims
• Real rubber Tarmac Buster tires with retro styled tread pattern
• Latest Heavy-Duty drivetrain option parts installed
• FHSS radio system with failsafe
• 4mm aluminum monocoque chassis with zero kick-up for optimal on-road performance
• Powerful 23cc gasoline 2-stroke engine
• Torx T27 engine screws
• 700cc fuel tank provides 45 minutes of driving
• High flow muffler
• 8,000 RPM performance clutch
• VVC/HD externally adjustable shock absorbers
• Lowered front and rear shock mounts
• Lowered front and rear hub carriers
• Extra-durable suspension derived from the Baja 5B, 5T and 5SC
• Large dense foam bumper mounted to extra-thick bumper mount
• Body specific front, rear and side body mounts for enhanced rigidity
• Viscous torque differential
• Enclosed radio box
• External battery charging plug
• Durable roll cage protects engine
• Gunmetal anodizing for super-cool looks
• Complete set of ball bearings
• 100cc of 2-stroke oil included for treating 1 gallon/5 liters of gasoline/petrol
• 6V 3000mAh receiver pack and universal, multi-region wall charger included
• 4 AA batteries for transmitter included

Specifications:
Wheelbase: 570mm [ A ]
Length: 1040mm [ B ]
Height: 280mm [ C ]
Width: 510mm
Weight: (without fuel)

Includes:

• (4) AA Batteries for Transmitter
• 3000mAh Receiver Pack
• Multi-region receiver pack charger
• 100cc bottle of 2-stroke oil

Needed to Complete:

• 1 gallon/5 Liter of Pump Gasoline/Petrol
• 1 gallon/5 Liter Fuel Can

Features:

• Baja 5T-1 Truck Body
• VVC/HD Shock Set
• Outlaw Truck Wheels
• High Flow Muffler
• Anodized Aluminium Parts
• Front & Rear Sway Bars
• Modified Rear Shock Tower Brace
• Double Wishbone Suspension
• SFL-11MG Metal Gear Steering Servo
• Heavy Duty Beadlock Wheels
• Moulded Rear Spoiler
• Heavy Duty Rear Dogbones
• Disc Brake System
• Full Ball Bearings
• 8000 RPM Clutch
• Aluminium Alloy Diff Case
• Extended Roll Cage

Includes:

• Pre-Assembled 1/5th scale 2WD truck with Fuelie 26cc gasoline engine
• radio set and SFL-11MG servo
• (4) "AA" Batteries (for Transmitter)
• 3000mAh Receiver Pack
• Multi region Battery Charger

Needed To Complete:

• Gasoline
• 2 Stroke Engine Oil
• 5 Litre Fuel Can

Features:

• Factory-assembled RTR large scale gas buggy
• Fully functional modular polymer roll cage
• Custom, pre-painted polycarbonate body panels
• Heavy duty 24mm front hex hubs
• Super HD driveshafts
• Single piece rear hub
• TF-45 FHSS radio system with failsafe
• Powerful pull start 26cc 2-stroke engine
• 4mm Aluminum monocoque chassis
• 700cc fuel tank for up to 45 minute runs
• High flow tuned muffler
• Sand rail fitted with off-road tires
• TSK-b Class 1 buggy fitted with HB Rodeo SC tires
• 6V, 3000mAh receiver pack with wall charger
• Big bore shocks with 6mm diameter shafts
• 8000 RPM performance clutch
• Full ball bearings

Specifications:
Chassis: " (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Muffler: High-flow tuned
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 FHSS radio system with failsafe
Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, seconds/60°, SF-20W throttle servo
Body: Pre-painted custom polycarbonate body panels
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH
Ball Bearings: Full set
Wheels: Front x " (119 x 61mm), rear x 3" (119 x 76mm) with beadlock mount
Tires: HB Rodeo SC
Wheelbase: " (571mm)
Ground Clearance: " (61mm)

Includes:

• Baja 5B TSK-b Class 1 Buggy w/Kraken RC Sidewinder X5 Conversion
• K26 Gasoline Engine
• 3-ch Radio
• Steering & Throttle Servos
• 100cc bottle of 2-Stroke Oil
• RX Battery
• Instruction Manual

Features: 

• GT15C 15cc 2-stroke Octane engine with pull-start; .91 ci of power
• Massive 300cc fuel tank for over 20 minutes of runtime per tank
• Savage XL extended chassis with 3mm thick TVP plates
• 4-shoe Quadra clutch system with cooling fan
• All-metal shaft drivetrain for durability
• 3-speed transmission for aggressive action
• Machined steel spur gear
• Heavy duty clutch bell and dog bone outdrives and axles
• Machined brake hubs and triple-disc brake system for impressive stops
• Extra-large Big Bore oil-filled shocks on each corner
• Low fuel costs using pump gasoline and 2-stroke oil
• Water-resistant receiver and battery box
• Waterproof steering and throttle servos
• Fully equipped with ball bearings for maximum efficiency
• radio system for hassle-free performance
• All-terrain tires with standardized Savage 17mm hex hubs

Specifications:
Length: in (585mm)
Width: in (445mm)
Weight: lbs (7076g)
Height: in (265mm)'
Wheelbase: in (395mm)

Included Accessories: 

• (2) 1200mAh Battery Packs
• (1) Wall Charger
• "AA" Batteries for transmitter

Features:

• Factory-assembled & pre-painted electric-powered full-time 4WD 1/10 scale off-road truck
• Officially licensed replica Toyota FJ Cruiser body with functional roof rack plus side mirrors
• Front bumper features brush guard, light mounts, D-ring shackles and swing-away rear spare tire mount
• Adjustable rock rail side sliders help the truck get over tough obstacles
• Steel C-channel chassis rails
• Front-mount motor and transmission position for ultimate scale realism and front weight bias to improve climbing traction and provides more realistic driving
• All-metal gear drivetrain for extreme durability
• Central transfer case with slider driveshafts to front and rear differentials prevents motor stall for the best climbing action and also straightens & lowers center driveshafts for more efficient power transfer
• Axles feature locked differentials with small diff case and aluminum differential pumpkin cover
• HPI water-resistant SS-20WR high torque steering servo with CMS (Chassis Mounted Servo) realistic steering setup
• HPI waterproof SC-3sWP2 Crawler Edition adjustable electronic speed control
• HPI 35-turn crawler spec motor provides speed as well as crawling torque
• 12mm hex hubs to fit any available crawler wheels
• Shock towers have multiple shock mounting positions to allow for wheelbase options
• BTA (Behind The Axle) steering linkage for improved approach and departure angles
• Panhard bar with aluminum panhard mount for scale looks and optimized geometry with zero bump steer
• Zero Ackermann high steer knuckle design for improved obstacle clearance and tighter turning radius
• 3-link front and triangulated 3-link rear suspension
• Oil-filled aluminum coilover shock absorbers (63-90mm stroke) with adjustable threaded shock bodies for quick ride height changes and dual-stage shock springs
• Aluminum lower link/shock mounts
• Adjustable fully braced body mounting to fit any style of off-road body
• All-terrain Rockthorn 109mm x 38mm soft S-Compound tires with chunky tread blocks
• Beadlock style CR-10 ten-spoke wheels
• HPI TF-40 radio system with carry handle
• HPI waterproof receiver in protective case
• Full set of ball bearings
• Includes NiMH battery and charger and 4 AA batteries for radio transmitter

Specifications:

• Dimensions
• Length: 527mm (")
• Width: 227mm (9")
• Height: 238mm (") with roof rack, 217mm (") without (will vary depending on tire choice and suspension settings)
• Wheelbase: 311mm (")
• Front overhang: 101mm (")
• Rear overhang: 135mm (")
• Weight
• Running weight: (lbs)
• Weight without battery: ()
• Capability
• Break-over angle: degrees
• Approach angle: 55 deg
• Departure angle: deg
• Max climb angle: 49 deg
• Max tilt angle: 28 deg
• Axle articulation: 30 deg
• Ground clearance: 68mm capable (")
• Ground clearance at standard ride height: 60mm (")
• Axle ground clearance: 32mm (")
• Gearing
• Drivetrain ratio:
• Transmission gearing:
• Axle gearing:
• Transfer case gearing:

Features:

• On power handling and stability
• Smooth and easy, yet sufficient steering
• Staying upright over bumps
• High grip cornering

Needed to Complete:

• 2-channel, 2-servo R/C System for cars
• 21-class Engine & Tuned Pipe
• Engine starting tools
• Shock & Diff fluid
• Air Filter fluid
• Batteries for R/C system
• Tires, Inserts & CA Glue 
• Fuel & Fuel Bottle
• Polycarbonate Paint for Body
• Tools for Assembly

Note: Completed vehicle shown for illustrative purposes only and is not included.

Specifications: 

Type: CLASS 1500 Buggy 4WD
Scale: 1/5 - 2 Stroke Gas Vehicle
Engine Type: Zenoah 32cc G320RC with stock muffler (ARTR with Engine option)
Servos: 1/4 Scale Servos Included for both ARTRs
Length: (884mm)
Width: (580mm)
Height: (320mm)
Battery Box Dimensions L: 120mm W: 51mm H:
Ground Clearance: (50mm) adjustable to (100mm)
Wheelbase:  (608mm)
Weight: lbs ( kg) - Without Motor
Main Chassis: 5mm thick 6061 T6 aluminum
Suspension: 2 Front-Wheel Independent with Rear Solid Axle
Drivetrain: 4WD - Front and Rear Differentials with Center Transmission
Tire Type: All Terrain Dominator, heavy threads for long wear. Medium compound
Wheel Size: in  (186x74mm)
Gear Ratio: 1:

Servo Specifications:
Kraken Model: TS-555HV (Waterproof)
Operation Voltage:
Torque: 555 oz/in @6V, 694 oz/in @ using 2S LIPO
Speed: at 6V/
Rated Current: 3500mA @6V/4500mA@
Continuous Current: 600mA @6V/ 700mA @
Neutral Point: 1500us
Dimensions:
Weight: 7oz
Gears Type: Metal
Wiring White: Signal
Wiring Red:
Wiring Black: Ground
Connector Type: Futaba or JR
Ingress Protection: IPX7
Enclosure: Aluminum Anodized Case (Waterproof)
Servos Warranty: 1 YR Limited Warranty
**Warning: Kraken RC servos are incompatible with SPEKTRUM radios and may result in vehicle failure and loss of control. We highly recommend using only the following radios - Futaba 3PV, Futaba 4PL, Futaba 4PLS, 4PV, 4PX. If you want an affordable radio that works, you can use the Tactic 3TTX300

Needed To Complete:

• Radio System
• Receiver Battery Pack
• Gasoline
• 2-Stroke Oil

WARNING NOTE: Kraken RC servos are incompatible with SPEKTRUM radios and may result in vehicle failure and loss of control. We highly recommend using only the following radios - Futaba 3PV, Futaba 4PL, Futaba 4PLS, 4PV, 4PX. If you want an affordable radio that works, you can use the Tactic 3TTX300

Specifications: 

Length: 515mm
Width: 310mm
Height: 135mm
Wheelbase: 360mm
Tread (F/R): 262mm/265mm
Tire (F/R): 97mm ×40mm
Gear Ratio: 1st , 2nd
Weight: 3,650g (approx.)
Engine: KE25
Radio System: KT-331P w/KR331 receiver

Includes:

• Pre-assembled chassis installed with 2-ch, 2-servo R/C system and pre-set control linkages.
• Pre-painted factory assembled body with decals applied.
• Installed KE25 rear exhaust engine.
• Installed polished tuned muffler.
• Syncro KT-331P transmitter.
• Hex wrenches: , , , .
• Cross wrench (large) and 17mm wheel wrench.

Needed to Complete:

• (8) AA batteries for transmitter (4) and receiver (4)
• Fuel
• Engine starting tools (fuel bottle, plug heater)

Features:

• Strongest version yet of the 8 world championship winning Inferno.
• Factory assembled Readyset includes everything except fuel, batteries for transmitter and starting tools.
• Includes polished tuned muffler.
• Equipped with high speed & high torque servos.
• Original Inferno design shaft drive 3 diff full time 4WD chassis.
• Setting adjustments: wheelbase, tread, roll centre, caster angle, toe angle, and camber change ratio.
• Efficient heat sink brake disk and center diff with increased case capacity deliver stable control through to the end of the race.
• Bushings replace E-rings in the suspension structure to rationalize the setting and maintenance order.
• Mudguards prevent dirt entering the drive shaft or the wheels.
• Concave area on the side guards is compatible with the thickness of magic tape so body also prevents dirt entering the chassis.
• Stable fuel supply is delivered from fuel tank with easy hook cap.
• Uses stylish and secure hex screws on all parts.
• Features a large capacity air cleaner that extends maintenance cycle.

Specifications:
Length: 490mm
Width: 307mm
Height: 180mm
Chassis Type: Full Time 4WD with 3 diff shaft drive
Wheelbase: 325mm (4 settings with rear hub collar position)
Tread (F/R): 254mm (change bushes for 3 rear and 2 front settings)
Tire(F/R): Micro Square Pin Type : 116 x 44mm (both F/R)
Gear Ratio: ：1
Weight: 3,370g approx.
Engine: KE21R (recoil starter installed / rear exhaust)

Includes:

• Factory assembled chassis installed with R/C system
• Printed pre-cut body complete with coloring
• Pre-installed KE21R engine with rear exhaust
• Polished tuned muffler
• Syncro KT-331P transmitter
• , 2 & Hexagonal wrench
• Cross wrench (small)
• 17mm Wheel wrench

Needed To Complete:

• (8) "AAA" Alkaline batteries (for transmitter)
• Fuel
• Fuel Bottle
• Glow Igniter

Included Option Parts:

• Shock cases - HD Coated shock cases for Front and Rear (IFW470-01/IFW471-01)
• Shock pistons - hole pistons (IF347-138)
• Wheel nuts -  serrated wheel nuts (IFW472GM)
• Front Shock Stay - short type hard front shock tower (high mount) gunmetal color (IFW464)
• Front upper suspension holder - aluminum hard front upper suspension holder (high mount) (IFW466)
• Diff bevel shaft  - light weight diff bevel shafts (IFW467)
• Front hub carrier - degree front hub carrier (IFW468)
• Spur gear -  47T spur gear (IF410-47)
• Shock bushing - light weight shock bushing (IF346-04LB)
• Brake pad - new brake pads (IFW473)
• Shock cap - aeration shock caps (IFW469)

Specifications:

Length: 490mm
Width: 307mm
Height: 180mm
Ground Clearance: 28mm
Wheelbase: 325mm (adjustable with rear hub washers)
Tread (F/R): 254mm
Tires (F/R): Sold separately
Gear Ratio:
Weight: 2,950g (approx.)
Engine: .21 Class (sold separately)

Includes:

• Unassembled kit
• Clear body
• Wheels
• Logo decals
• Window mask

Needed To Complete:

• 2ch and 2 servo R/C system for cars
• .21-class engine
• Muffler and manifold
• 1/8 tires and inserts
• Fuel and Fuel bottle
• Plug heater
• Starter box
• Batteries for R/C system
• Diff oils and air cleaner oil
• Paint for body
• Tools

Features: 

• Readyset contains a pre-assembled chassis and body, including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
• Both steering and throttle are equipped with high-torque metal geared KS5031-09MW servos.
• Precision setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
• Features a large capacity air cleaner that extends the maintenance cycle.
• Wide variety of available option parts provides extensive range for tuning on track performance.

Specifications:
Length: 490mm
Width: 307mm
Height: 180mm
Ground Clearance: 28mm
Wheelbase: 325mm (4 settings available by changing rear hub collar position)
Tread (F/R): 254mm (2 front settings and 3 rear settings available)
Tire (F/R): 116 x 44mm
Gear Ratio:
Weight: 3,370g approx.
Engine: KE21SP (recoil starter installed/rear exhaust)

Includes:

• Factory assembled chassis installed with R/C system
• Printed pre-cut body complete with decals
• Pre-installed KE21SP engine with rear exhaust
• Syncro KT-331P transmitter
• , , Hex wrenches
• Cross wrench (small)
• 17mm Wheel wrench

Needed to Complete:

• AA x 8 alkaline batteries for transmitter and receiver
• Fuel
• Starting tools (Fuel bottle, Plug heater)

Features:

• World and National Championship winning chassis design with forward battery tray for improved weight distribution
• Shaft drive system with front universals and three sealed gear differentials
• Powerful revised engine with stronger conrod and pullstarter
• Three-shoe aluminum clutch with scissor springs for strong, consistent acceleration
• High-grade, anodized aluminum chassis
• Molded composite front and rear chassis braces that allow just enough flex for superior traction
• Aluminum shock towers with durable steel upper mounting bushings
• High performance big bore oil shocks
• Turnbuckle adjustable linkages and upper suspension arms
• KT331P radio system with LCD menu-based adjustments and signal loss failsafe
• Powerful and high response KS5031-09MW metal-gear, water-proof servos
• Polished, lightweight aluminum header and tuned pipe
• 150cc fuel tank is maximum size for the longest possible run times
• Flip top filler cap allows refueling with the engine running for extended bashing or racing
• Mud guards are mounted to the rear suspension arms to protect the rear drive shafts
• Slick graphics with Unique Energy Drink logo
• Fuel bottle and glowplug igniter included (2x D-size alkaline batteries for igniter not included and required)

Specifications:
Length: in. (550mm)
Width: in. (427mm)
Height: in. (225mm)
Wheelbase: in. (355mm)
Tread (F/R): in. (289mm)
Tire Size (F/R): in. (148x66mm)
Gear Ratio: FDR
Approx. Weight: oz. (3750g)
Engine: Kyosho KE25

Includes:

• Factory assembled truck with painted, trimmed and mounted body
• KT-331P GHz radio system
• Fuel bottle
• Alkaline powered glow igniter (batteries not included)
• Instruction Manual

Needed To Complete:

• (8) AA-size alkaline batteries (4x for transmitter & 4x for receiver unit)
• (2) D-size alkaline batteries for glow igniter
• Nitro Fuel

Features:   

• Fully assembled Readyset just needs fuel and batteries to run.
• 3-speed A/T delivers maximum effectiveness from the powerband.
• Rigid front and rear axles with solid casing realize effective traction transfer.
• Large capacity 150cc fuel tank enables long run times.
• Updated design knuckles expands steering angle.
• Pre-cut and pre-painted body is complete with decals applied.
• Rear differential equipped with strengthened steel bevel gears.
• Radio box protects R/C components from dust and dirt.
• Big unidirectional pneumatic rubber tires.
• Interchangeable front and rear suspension arms provide efficient parts utilization for maintenance.
• Long wheelbase and low down suspension realize dynamic rough road performance with rock-solid straight line stability and cornering speed.
• High torque waterproof servo
• 17mm wheel hubs & nuts, compatible with Inferno series. 

Specifications:
Length: 545mm
Width: 415mm
Height: 245mm
Wheelbase: 360mm
Tread (F/R): 310mm / 310mm
Tire(F/R): 160×100mm / 160×100mm
Gear Ratio:
Weight: 4,100g (approx.)
Engine: KE25 with Recoil Starter

Includes:

• Factory assembled chassis with R/C linkage setup complete
• Pre-cut and pre-painted body complete with decals applied
• Pre-installed Synchro KT-231P R/C system
• Fuel Bottle
• Plug Heater
• Cross Wrench
• Hex Wrench

Needed To Complete:

• (4) "AA" alkaline batteries for system
• Fuel
• (2) "D" batteries for glow plug heater

Features: 

• Genuine Zenoah G320 32cc engine
• Innovative Bind-N-Drive™
• Spektrum SR6000T telemetry-ready receiver
• Improved bar style steering rack with adjustable Ackermann
• Improved center differential orientation
• Improved drive line angle
• Heavy-duty brakes
• Innovative clutch mount with gear mesh brace
• Tough throttle servo brace
• Extra-large 800cc capacity fuel tank

Specifications:
Type: 1/5th Scale 4wd Short Course Truck
Scale: 1/5
Length: In ()
Width: in (527mm)
Height: in ( mm)
Ground Clearance: in ()
Wheelbase: in ()
Weight: lbs ( kg)
Chassis: 5mm Plate, 6061-T6 Aluminum
Suspension: 4-Wheel Independent
Drivetrain: 4WD
Tire Type: Firm, Square Pin
Motor or Engine: 32cc Zenoah G320
Speed Control: SR6000T Telemetry Receiver
Radio: DSMR Compatible (Not Included)
Servos: S900S / S901T
Batteries: 2S Receiver LiPo (Not Included)
Gear Pitch: MOD
Wheel Size: () wide
Kit/RTR: BND
Shock Type: Oil-Filled, Coil-Over Springs
Body: 4 piece, Polycarbonate, Short Course with Decals
Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing
Fuel Tank Capacity: 800cc ( oz)

Includes:

• (1) Grey, Orange & White Losi 5IVE-T® BND 4WD SCT
• (1) Spektrum® SR6000T 6-Channel DSMR Slim Receiver with Telemetry
• (1) Zenoah™ 32cc Gasoline Pull-Start Engine
• (1) S900S 1/5 Scale Metal Gear Steering Servo
• (1) S901T 1/5 Scale Metal Gear Throttle Servo
• (1) Wheel Wrench
• (1) Rod End/Shock End tool
• (1) Multi Wrench
• (1) Spark Plug Wrench
• (1) Bind Plug
• (1) Exhaust Gasket
• mm, , , Allen Wrenches
• Product Manual

Needed To Complete:

• 2S Lipo Receiver Battery and Appropriate Charger
• DSMR Compatible Transmitter
• 87-92 Octane Gasoline
• 2-Cycle Oil
• Ratio Rite Measuring Cup

Desert Buggy XL "K&N" Features:

• K&N is recognized as a world leader in filter technology. Instant credibility in the motorsports world.
• Genuine K&N Air Filter, Increased air flow for increased engine performance.
• Established and proven DBXL Chassis. Affordable, durable large scale vehicle.
• 4wd performance and drivabitlity.
• 23cc Gasoline Engine. Easy to use, reliable, upgradeable.
• Roll Cage protects chassis and can be removed by taking of only 10 body clips.
• 24mm Hex Standard Hex size in 1/5th scale vehicles. Allows for use of multiple tire and wheel combinations.
• Sealed differentials last longer and provide endless tuning options.

Specifications:
Type: 4WD RTR Off-Road Gas Buggy
Scale: 1/5
Length: in (781mm)
Width: in ()
Height: in ()
Ground Clearance: in ()
Wheelbase: ()
Weight: lb ( kg)
Chassis: 4mm Plate, 6061-T6 Aluminum
Suspension: Independent
Drivetrain: 4WD
Tire Type: All-Terrain in () Diameter
Motor or Engine: Pull start 23cc gasoline
Radio: Spektrum DX2E 2-Channel
Servos: Installed 30 kg Servo
Batteries: Dynamite 1700 mah Receiver Pack
Wheel Size: in ()
Kit/RTR: RTR
Shock Type: Oil-Filled, Coil-over Springs
Body: Panels, Silkscreened
Ball Bearings: Full Ball Bearing Drivetrain
Fuel Tank Capacity: 740cc
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: No

Needed to Complete:

• 87-93 Octane Gasoline
• 2-Cycle Oil
• Gas Can
• Battery Charger

Features:

• Aluminum front spindles
• Powerful Dynamite® 2-stroke pull-start 29CC gasoline engine
• 4WD Drivetrain based on the DBXL
• AVC® Equipped Receiver with DSMR™ technology and DX2E transmitter
• Dual high torque large-scale high voltage steering servos
• Extended chassis and suspension arms
• Monster truck tires and wheels
• Large bore threaded shocks
• Dual disc brake system
• Sealed viscous differentials
• Two body color options
• Molded engine cage and body supports
• Dynamite LiPo receiver pack
• Easy access on/off switch and wiring harness

Specifications:
Type: 1/5 Scale 4WD RTR Monster Truck
Length: in (908mm)
Width: in (664mm)
Height: in ()
Ground Clearance: in ()
Wheelbase: in ()
Weight: lb ( kg)
Chassis: 4mm Plate, 6061-T6 Aluminum
Suspension: Independent
Drivetrain: 4WD
Tire Type: Losi Monster Claws
Motor or Engine: 29cc CY F29 4-bolt Gas 2-Stroke
Radio: DX2E
Servos: Yes
Batteries: 4000 mAh 2S 15C Lipo Receiver Pack
Wheel Size: in.( mm)
Kit/RTR: RTR
Shock Type: Oil-Filled, Coil-Over Springs
Body: Monster Truck, silk screened
Ball Bearings: Full Ball Bearing Drivetrain
Fuel Tank Capacity: 740cc
Experience Level: Intermediate
Recommended Environment: Outdoor
Is Assembly Required: No

Needed To Complete:

• 87-93 Octane Gasoline
• 2-Cycle Oil
• Gas Can
• Battery Charger