| Product Code | MP Series |
|---|---|
| BrandName | Hongtek |
| Country of Origin | China |
| Keywords | high flow pleated cartridges, high flow cartridges, pleated high flow cartridges, high flow cartridge filters,High Flow Pleated Filter Cartridges, High Flow Pleated Filters, High Flow Filters, High Flow Filter Cartridges, High Flow Water Filters, Water filter elements, Pleated filter element, Pleated filter cartridges, Pleated water filter cartridges, Pleated water filters, High flow cartridges, Pleated high flow filter |
| Price | USD 88.72 Piece |
| Min. Order | 2 Piece |
| Payment Terms | L/C,T/T |
| Send Inquiry | |
MP Series Pleated High Flow Cartridges Replace to 3M Cuno High Flow Filters
Description
High Flow Pleated Cartridges have high particle removal efficiency and strong contaminant holding capability. PP pleated high flow cartridges utilize polypropylene end caps, outer netting and inner hard core help to protect the radial pleated structure integrity and provide consistent performance and good quality for effective particle retention. Pleated high flow cartridges can directly 100% replace to 3M Cuno 7000 and 740B high flow series filter element.
Feature
Application
| Filter Media | Polypropylene |
| Length | 20"(508mm), 40"(1016mm), 60"(1524mm) |
| Outside Diameter | 6 inch () |
| Inside Diameter | 3 inch () |
| Filtration Rating | 1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 70μm |
| Support/Drainage | Polypropylene(PP) |
| End Cap Material | Glass fiber reinforced Polypropylene(PP) |
| Seal Material | EPDM, Buna-N, Silicon |
Operation Data for MP Series High Flow Pleated Cartridges
| Suggested Maximum Flow Rate | 1560 LPM |
| Maximum Operating Temperature | 80℃ |
| Maximum Forward Differential Pressure | 50 psid @ 68°F ( bar @ 20°C) |
| Recommended Change-out Differential Pressure | 35 psid @ 68° ( bar @ 20°C) |
Flow Rate for MP Series 5 micron High Flow Pleated Cartridges
| Show Detail for High Flow Pleated Cartridges | ||
|
● Considerate designed handle easily for install and change out ● "Twist to lock" seating mechanism design to provide a positive seal ● 100% replace 3M Cuno 7000 and 740B high flow series filter element ● A large diameter core allows up to 500 gpm for per high flow pleated cartridges ● 2-3 times larger surface area than normal diameter 6" vertical pleated high flow cartridges |
||
| High Flow Pleated Cartridges vs Depth & Pleated Cartridges | ||
|
● The High Flow System requires 90% fewer filter cartridges as competitive " cartridge systems for a requested flow rate. ● The High Flow Housings are 33% to 50% smaller than competitively sized housings for a requested flow rate, and save much space for when using pleated high flow cartridges. ● High efficiency filtration of high flow cartridge filters is a user-friendly high flow system, means fewer filters and faser change-outs than competitive cartridges. |
||
| Installtion Example for MP Series High Flow Pleated Cartridges | ||
|
● Long service life and easy to replace, reduced cartridge handling ● High flow rate & low delta pressure, nominal rated filters are designed ● Cartridges are suitable to installed in standard high flow filter housings ● Radial pleated structure, large filtration area and high dirt holding capacity ● High flow pleated cartridges have rock-steady structure and reliably good sealing |
||
| MP | Material | Length | Filtration Rating | End Caps | O-ring Material |
|
MP Series High Flow Pleated Cartridges |
P = Polypropylene | 20 = 20" | 1 = 1μm | A = Type A End Caps | E = EPDM |
| 3 = 3μm | |||||
| 40 = 40" | 5 = 5μm | N = Buna-N | |||
| 10 = 10μm | B = Type B End Caps | ||||
| 60 = 60" | 20 = 20μm | S = Silicon | |||
| 50 = 50μm | |||||
| 70 = 70μm |
For Example:
MP-P-40-5-A-E
MP Series High Flow Pleated Cartridges - Material = PP - Length = 40" - Filtration Rating = 5μm - Type A End Caps - O-ring Material = EPDM