Hongtek Filtration Co., Ltd.

PF series High Flow Cartridge Filters Parker Mega-flow high flow filter replacement

Description

Pleated High Flow Filters are made of advanced polypropylene microfiber, pleated filters are Parker high flow water filters replacement. Pleated high flow filters can directly replace Parker Megaflow and Fulflo series high flow pleated filters for high flow applications water filtration system. The water treatment volume for per pleated high flow filter cartridge equals to 10 pcs standard 40 inch length and " outer diameter water filter cartridges,inner single O-ring and double O-rings end caps insure no bypass and handle design makes more easier to install and change out.

Feature

1. Good performance with consistent good filtration efficiency and long service life
2. High flow pleated filters are high dirt holding capacity, high flow rates and low pressure drops
3. High flow filter cartridges are wide chemical compatibility for different applications
4. Pleated high flow filters are easier install and replace to Parker Megaflow and Fulflo series high flow filters
5. Per high flow filter equals to 10pcs 40 inch length and " outer diameter standard filters,save costs and workplace

Application

1. Petrochemical,refineries
2. Food and beverage filtration
3. Power plant water treatment
4. Paints, inks, magnetic media
5. Sea water desalination and RO pre-filtration
6. API,solvents, and water filtration in biopharm market

Specification

Filter Media	Polypropylene Pleated
Length	20"(508mm), 40"(1016 mm), 60"(1524mm)
Outside Diameter	6 inch(152mm)
Filtration Rating	1μm, 3μm, 5μm, 6μm,10μm, 20μm, 40μm, 70μm, 100μm
Support/Drainage	Polypropylene (PP)
End Cap Material	Glass fiber reinforced Polypropylene (PP)
Seal Material	EPDM, Viton
Outside	Netting

Performance

Operation Data for PF Series Pleated High Flow Filters

Maximum Operating Temperature	82℃
Maximum Differential Pressure	@ 82℃
Suggested Maximum Flow Rate	20"(508mm) - 30m³/h
	40"(1016mm) - 50m³/h
	60"(1524mm) - 70m³/h

Flow Rate for Length: 40" PF Series Pleated High Flow Filters

Tech Support

Installation Example for PF Series Pleated High Flow Filters

● Pleated high flow filters have stable structure and reliably sealing ● High flow pleated filters are installed in standard high flow filter housings ● Long service life and easy to replace to Parker Megaflow and Fulflo series ● Geometry pleated structure, large filtration area and high dirt holding capacity ● High flow rate & low delta pressure, filters are designed for high filtration efficiency

Order Information

PF	Material	Length	Filtration Rating	Open End Type	O-ring Material
PF Series Pleated High Flow Filters	P = Polypropylene	20 = 20"(508mm)	1 = 1μm	S = Single O-ring	E = EPDM
			3 = 3μm
			5 = 5μm
		40 = 40"(1016mm)	6 = 6μm
			10 = 10μm	D = Double O-rings	V = Viton
			20 = 20μm
		60 = 60"(1524mm)	40 = 40μm
			70 = 70μm
			100 = 100μm

For Example:

PF-P-40-5-D-E

PF Series Pleated High Flow Filters - Polypropylene - 40" (1016mm) - 5μm - Double O-rings - EPDM