1500mm high 20cm width 3mm thick Steel formwork
Steel formwork is used for concrete pouring. In addition to steel formwork, there are wooden formwork, plywood formwork, etc.
Golden Deer Steel formwork is widely used in construction projects due to its multiple use and beautiful appearance of concrete pouring.
Steel formwork Description
It is an artificial support provided under and around precast or cast-in-place concrete works. The template is usually made of steel or wood. Formwork construction and casting are crucial in the concrete industry. It bears a lot of specific costs.
Waterproof, it should be sturdy and reusable, and the contact surface should be even, according to the size of the component.
Round 6000mm high ,300mm,400mm,500mm diameter Steel Pipe
hollow section 400mm diameter steel pipe Description
The steel pipe has a hollow section and its length is much larger than the diameter or circumference of the steel. According to the cross-sectional shape, it is divided into round, square, rectangular and special-shaped steel pipes; according to the material, it is divided into carbon structural steel pipes, low-alloy structural steel pipes, alloy steel pipes and composite steel pipes; steel pipes are not only used to transport fluids and powdered solids, and exchange Heat energy, manufacturing mechanical parts and containers, it is also an economical steel
The inner and outer surfaces of the pipeline must be smooth, free of cracks, cracks, material coverage, and non-metallic inclusions. After removing the defects generated in the production process, small scratches, bumps, dents, thin layers of welding slag or traces are allowed to prevent the wall thickness from falling to the minimum allowed range. The weld must be compact, continuous, and free of cracks or other defects, which will reduce the weld resistance of the base metal.
200mmheight, 200mm width Galvanized square and round tubes
Galvanized square tubes Specification:
200mmhei,200mm width,4mm-15mm thickness Galvanized square and round tubes. Mainly used in curtain wall, construction, machinery manufacturing, steel construction projects
Galvanized Steel Round Tubing Description
Galvanization provides a protective zinc coating that prevents premature rust and corrosion on your tubing. With this protective coating, galvanized round tubing will not only last longer but will also require less maintenance.
In order to better meet your needs, we offer an extensive inventory of galvanized steel tubing in a variety of sizes, including hard-to-find and specialty sizes. We know that it can be a challenge to find the right size for your unique specifications, and we want to find the perfect galvanized steel round tubing for your application, no matter the size.
Scaffolding fasteners
,1.6kg , ,2kg Scaffolding fasteners, Used for fixing steel pipe scaffold with outer diameter of 48mm
Scaffolding fasteners Description
considerably longer than is need when the nut has been tightened. This excess length is required to allow the clamp half to be opened even while the nut is retained on the screw. To do so, the screw and nut arrangement engages a slot in the clamp half. This excess length of screw then protrudes into the area around the scaffolding system where it can cause a considerable hazard to people and equipment. For example, an operative walking pass the clamp can snag a part of their body or a part of their equipment on the screw, causing direct injury or indirect injury, perhaps when a loose strap catches on the screw and pulls the operative off balance, or causes an item of equipment to fall towards the ground where it could hit another operative but also at least damage the equipment and other equipment/supplies on the ground.
50-60cm high, 18-20cm diameter top support
Golden Deer Top support, the building is used for the bottom and top supports of the scaffolding. Both the top and bottom supports are adjustable for the integrity of the screw. The screw consists of a screw, a nut, a ball, a preloader, a commutator and a dust protection device. Its function is to convert rotary motion into linear motion, which is a further extension and development of Akem screw. An important aspect of this development is the change from sliding to rolling motion of the bearings.
Top support Description
The upright pole and the crossbar connecting the upright pole are connected by a roulette wheel at the position where the upright pole is connected to the crossbar, with a jack on the roulette wheel and a crossbar plug perpendicular to the crossbar at both ends of the crossbar. The crossbar plugs and the wheels connect the crossbar to the riser bar in a way that is not only very stable but also easy to install. When erecting wheeled scaffolding, the crossbar plugs can be inserted directly into the sockets of the wheel, and the connection of the plugs and sockets is self-locking, making it more stable during construction. The connection structure of the plugs and sockets is self-locking
110mm inner diameter 145mm outer diameter bearing
Golden Deer Bearings are a crucial tribological component of many types of machinery and exist in a variety of forms and shapes. They can be defined as a component that supports/permits only a specific type of motion (restriction of degrees of freedom) in a system that may be under static or dynamic loading.
The main purpose of bearings is to prevent direct metal to metal contact between two elements that are in relative motion. This prevents friction, heat generation and ultimately, the wear and tear of parts. It also reduces energy consumption as sliding motion is replaced with low friction rolling.
They also transmit the load of the rotating element to the housing. This load may be radial, axial, or a combination of both. A bearing also restricts freedom of movement of moving parts to predefined directions as discussed above.
Rolling element bearings contain rolling elements in the shape of balls or cylinders. We know that it is easier to roll a wheel than slide it on the ground as the magnitude of rolling friction is lower than sliding friction. The same principle is in work here. Rolling element bearings are used to facilitate the free movement of parts in rotational motion.
diameter,Unlimited height,the black tie wire
Cutting wire is to cut off various metal wires such as bright iron wire, fired wire, electro-galvanized wire, hot-dip galvanized wire, plastic-coated iron wire, painted iron wire, etc. according to customer requirements.
Golden Deer Cutting wire is made of annealed wire, galvanized wire, coated wire, paint wire and other wire, according to customer requirements straighten the cut after the cut. Products with easy to transport, easy to use features. Widely used in the construction industry, handicrafts, daily civilian and other fields. According to the specific requirements of customers,processing customized all kinds of special specifications products.
high,5mm diameter drill tail wire
the drill tail wire specifications:
The head type has flat head / round head / large flat head / The hexagonal head and the tail wire have been tested for tension, torque, screwing and salt spray, and fully meet the requirements of the corresponding standards.
The tail of the drill tail nail is mostly in the shape of a drill tail or a sharp tail, which quickly occupies the market due to its simple use and easy operation. The drill tail nail can be used for drilling holes on various basic materials to realize quick splicing and assembly, has strong adhesive force, is not easy to loosen and fall off, is very simple and convenient to use, and has high safety factor. In construction and decoration projects, various materials can be tightly combined, resulting in less cost and higher reliability. It is the most economical metal fastener. Widely applicable to various fields and materials.
The following points are the product drill tail wire features:
has good toughness: SUS410 with low carbon content is adopted and heat treatment technology is adopted to avoid fracture caused by hard inside of the drill tail nail.
Mobile Crusher
The mobile crushing station is mainly used for metallurgy, chemical industry, building materials, hydropower and other materials that often require relocation operations, especially for mobile stone operations such as highways, railways, and hydropower projects. The advantages of the mobile crushing
station: strong mobility, lower material transportation costs, direct and effective operation, flexible combination, and strong adaptability.
Mobile Crusher Machine Description
Mobile crusher is a new crushing machine for meeting people's high-standard requirements. The outstanding feature is that the mobile crusher can move freely according to the progress of the project.
100mm height, 5mm width Expansion bolt
Golden Deer Expansion screws are flat after use due to small drilling, large tension, and can be removed at will if they are not used. The advantages of keeping the wall flat are obvious and widely used in various decoration occasions.
Given the fastening mechanism, it's clear that expansion bolts are typically employed in applications where the standard threading cannot be created. In spite of the numerous similarities that it shares with the nail-in anchors featuring nylon sleeves, these bolts are utilized in heavy-duty applications such
as stadium seating or securing pews. There are several expansion bolt assemblies available, each serving a different role:
Lifetime Expansion Bolts: As their name suggests, these fasteners are designed to never be removed. They can be identified by the steel cone covering the head of the bolt.
Permafix Security Expansion Bolts: Commonly used to secure bars and grilles in place.