Electric resistivity :
Bending strength: >=
Elastic Modulus: <=14
Bulk density:
Ash:<=
CTE:
Ultra high power graphite electrode is a graphite electrode with allowable current density greater than 25A/cm2 . UHP graphite electrode mainly used in ultra-high power steelmaking electric arc furnace.
Physical and Chemical Index of Ultra high Power Graphite Electrode |
|||||
Item |
Unit |
UHP |
|||
300~500 |
550~600 |
700~800 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
~ |
Nipple |
~ |
~ |
~ |
||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
≥ |
Nipple |
≥ |
≥ |
≥ |
||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
≤ |
≤ |
Nipple |
≤ |
≤ |
≤ |
||
Bulk Density |
Electrode |
G/cm3 |
~ |
~ |
|
Nipple |
~ |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
||
Nipple |
|||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
~ |
|
Nipple |
~ |
~ |
UHP Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
UHP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
15000~22000 |
20~30 |
14 |
350 |
20000~30000 |
20~30 |
16 |
400 |
25000~40000 |
19~30 |
18 |
450 |
32000~45000 |
19~27 |
20 |
500 |
38000~55000 |
18~27 |
22 |
550 |
45000~65000 |
18~27 |
24 |
600 |
50000~75000 |
18~26 |
28 |
700 |
70000~120000 |
18~25 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length |
|||||
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=14
Bulk density:
Ash: <=
CTE:
Ultra high power graphite electrode is a graphite electrode with allowable current density greater than 25A/cm2 . UHP graphite electrode mainly used in ultra-high power steelmaking electric arc furnace.
Ultra High Power Graphite Electrode Current Carrying CapacityUltra High Power Graphite Electrode Current Carrying Capacity
Physical and Chemical Index of Ultra high Power Graphite Electrode |
|||||
Item |
Unit |
UHP |
|||
300~500 |
550~600 |
700~800 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
~ |
Nipple |
~ |
~ |
~ |
||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
≥ |
Nipple |
≥ |
≥ |
≥ |
||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
≤ |
≤ |
Nipple |
≤ |
≤ |
≤ |
||
Bulk Density |
Electrode |
G/cm3 |
~ |
~ |
|
Nipple |
~ |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
||
Nipple |
|||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
~ |
|
Nipple |
~ |
~ |
UHP Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
UHP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
15000~22000 |
20~30 |
14 |
350 |
20000~30000 |
20~30 |
16 |
400 |
25000~40000 |
19~30 |
18 |
450 |
32000~45000 |
19~27 |
20 |
500 |
38000~55000 |
18~27 |
22 |
550 |
45000~65000 |
18~27 |
24 |
600 |
50000~75000 |
18~26 |
28 |
700 |
70000~120000 |
18~25 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=14
Bulk density:
Ash: <=
CTE:
Ultra high power graphite electrode is a graphite electrode with allowable current density greater than 25A/cm2 . UHP graphite electrode mainly used in ultra-high power steelmaking electric arc furnace.
Physical and Chemical Index of Ultra high Power Graphite Electrode |
|||||||||
Item |
Unit |
UHP |
|||||||
300~500 |
550~600 |
700~800 |
|||||||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
~ |
||||
Nipple |
~ |
~ |
~ |
||||||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
≥ |
||||
Nipple |
≥ |
≥ |
≥ |
||||||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
≤ |
≤ |
||||
Nipple |
≤ |
≤ |
≤ |
||||||
Bulk Density |
Electrode |
G/cm3 |
~ |
~ |
|||||
Nipple |
~ |
~ |
|||||||
Ash Content |
Electrode |
% |
≤ |
||||||
Nipple |
|||||||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
~ |
|||||
|
Nipple |
|
~ |
~ |
UHP Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
UHP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
15000~22000 |
20~30 |
14 |
350 |
20000~30000 |
20~30 |
16 |
400 |
25000~40000 |
19~30 |
18 |
450 |
32000~45000 |
19~27 |
20 |
500 |
38000~55000 |
18~27 |
22 |
550 |
45000~65000 |
18~27 |
24 |
600 |
50000~75000 |
18~26 |
28 |
700 |
70000~120000 |
18~25 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=13
Bulk density:
Ash: <=
CTE:
High power graphite electrode is a graphite electrode with allowable current density between 18-25A/cm2. HP graphite electrode mainly used in high power steelmaking electric arc furnace.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=13
Bulk density:
Ash: <=
CTE:
High power graphite electrode is a graphite electrode with allowable current density between 18-25A/cm2. HP graphite electrode mainly used in high power steelmaking electric arc furnace.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus:<=9
Bulk density:
Ash:<=
CTE:
Regular power graphite electrode is a graphite electrode with allowable current density lower than 17A/cm2. RP graphite electrode is mainly used in the ordinary power electric furnace for steelmaking, silicon smelting and yellow phosphorus refining etc.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength:>=
Elastic Modulus: <=9
Bulk density:
Ash: <=
CTE:
Regular power graphite electrode is a graphite electrode with allowable current density lower than 17A/cm2. RP graphite electrode is mainly used in the ordinary power electric furnace for steelmaking, silicon smelting and yellow phosphorus refining etc.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Graphite heaters are widely used in various industrial furnace heating systems. They are characterized by high temperature resistance, uniform heating, resistance to chemical corrosion and long service life. It is the best choice for high temperature heating above 2300 ℃. We can produce different shapes of graphite heater according to the demands of the user.
Graphite heating element is widely used in kinds of heating system of industrial furnace. Ithas advantages of high temperature resistant, temperature uniformity, chemical resistance, long working life and so on. It is the best choice to high-temperature heating (above 2300*0). And we can produce heating elements with different shapes according to users* demands.
Graphite mold is widely used in all kinds of precision casting. It has the characteristics of high temperature resistance, high machining precision, uniform heat conduction and easy demoulding. With the development of science and technology, graphite mold will be used more widely in many fields.
Graphite mold is widely used in kinds of precision casting. It has advantages of high tempera-ture resistant, high machining accuracy, temperature welldistributed, easy demould and so on. With the development of science and technology, graphite mold will be bound to apply in more fields
Furnace rectangular is mainly used in electrode graphitization furnace, carborundum smelting furnace and so on. The graphiterectangularelectrode produced by our factory has the advantages of low resistivity, good thermal conductivity, high density and good oxidation resistance.
Graphite rectangular electrode is mainly used in electrode graphitization furnace, carborundum melting stove, our products have the characters as low resistivity, high density, good performance of electric and thermal conduction,and good anti-oxidant.
The main types of Medium-grain specialty graphite are graphite disk, graphite ring and graphite block, which are mainly used in graphite anode, graphite spout, graphite support plate, Thermal insulation cover for photovoltaic industry, heater and insulating heater, and so on. It has the characteristics of dense and uniform structure, high temperature resistance, oxidation resistance, low resistivity and high density.
It's main varieties include the graphite disk round and block. Mainly apply to field such as graphite anode、graphite pallet、the heat cover and heat element in the PV industry etc. have the characteristics of fine regulai structure,lower spcific resistance,high density.
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=14
Bulk density:
Ash:<=
CTE:
Ultra high power graphite electrode is a graphite electrode with allowable current density greater than 25A/cm2 . UHP graphite electrode mainly used in ultra-high power steelmaking electric arc furnace.
Physical and Chemical Index of Ultra high Power Graphite Electrode |
|||||
Item |
Unit |
UHP |
|||
300~500 |
550~600 |
700~800 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
~ |
Nipple |
~ |
~ |
~ |
||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
≥ |
Nipple |
≥ |
≥ |
≥ |
||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
≤ |
≤ |
Nipple |
≤ |
≤ |
≤ |
||
Bulk Density |
Electrode |
G/cm3 |
~ |
~ |
|
Nipple |
~ |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
||
Nipple |
|||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
~ |
|
Nipple |
~ |
~ |
UHP Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
UHP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
15000~22000 |
20~30 |
14 |
350 |
20000~30000 |
20~30 |
16 |
400 |
25000~40000 |
19~30 |
18 |
450 |
32000~45000 |
19~27 |
20 |
500 |
38000~55000 |
18~27 |
22 |
550 |
45000~65000 |
18~27 |
24 |
600 |
50000~75000 |
18~26 |
28 |
700 |
70000~120000 |
18~25 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length |
|||||
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=14
Bulk density:
Ash: <=
CTE:
Ultra high power graphite electrode is a graphite electrode with allowable current density greater than 25A/cm2 . UHP graphite electrode mainly used in ultra-high power steelmaking electric arc furnace.
Ultra High Power Graphite Electrode Current Carrying CapacityUltra High Power Graphite Electrode Current Carrying Capacity
Physical and Chemical Index of Ultra high Power Graphite Electrode |
|||||
Item |
Unit |
UHP |
|||
300~500 |
550~600 |
700~800 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
~ |
Nipple |
~ |
~ |
~ |
||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
≥ |
Nipple |
≥ |
≥ |
≥ |
||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
≤ |
≤ |
Nipple |
≤ |
≤ |
≤ |
||
Bulk Density |
Electrode |
G/cm3 |
~ |
~ |
|
Nipple |
~ |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
||
Nipple |
|||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
~ |
|
Nipple |
~ |
~ |
UHP Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
UHP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
15000~22000 |
20~30 |
14 |
350 |
20000~30000 |
20~30 |
16 |
400 |
25000~40000 |
19~30 |
18 |
450 |
32000~45000 |
19~27 |
20 |
500 |
38000~55000 |
18~27 |
22 |
550 |
45000~65000 |
18~27 |
24 |
600 |
50000~75000 |
18~26 |
28 |
700 |
70000~120000 |
18~25 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=14
Bulk density:
Ash: <=
CTE:
Ultra high power graphite electrode is a graphite electrode with allowable current density greater than 25A/cm2 . UHP graphite electrode mainly used in ultra-high power steelmaking electric arc furnace.
Physical and Chemical Index of Ultra high Power Graphite Electrode |
|||||||||
Item |
Unit |
UHP |
|||||||
300~500 |
550~600 |
700~800 |
|||||||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
~ |
||||
Nipple |
~ |
~ |
~ |
||||||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
≥ |
||||
Nipple |
≥ |
≥ |
≥ |
||||||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
≤ |
≤ |
||||
Nipple |
≤ |
≤ |
≤ |
||||||
Bulk Density |
Electrode |
G/cm3 |
~ |
~ |
|||||
Nipple |
~ |
~ |
|||||||
Ash Content |
Electrode |
% |
≤ |
||||||
Nipple |
|||||||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
~ |
|||||
|
Nipple |
|
~ |
~ |
UHP Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
UHP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
15000~22000 |
20~30 |
14 |
350 |
20000~30000 |
20~30 |
16 |
400 |
25000~40000 |
19~30 |
18 |
450 |
32000~45000 |
19~27 |
20 |
500 |
38000~55000 |
18~27 |
22 |
550 |
45000~65000 |
18~27 |
24 |
600 |
50000~75000 |
18~26 |
28 |
700 |
70000~120000 |
18~25 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=13
Bulk density:
Ash: <=
CTE:
High power graphite electrode is a graphite electrode with allowable current density between 18-25A/cm2. HP graphite electrode mainly used in high power steelmaking electric arc furnace.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus: <=13
Bulk density:
Ash: <=
CTE:
High power graphite electrode is a graphite electrode with allowable current density between 18-25A/cm2. HP graphite electrode mainly used in high power steelmaking electric arc furnace.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength: >=
Elastic Modulus:<=9
Bulk density:
Ash:<=
CTE:
Regular power graphite electrode is a graphite electrode with allowable current density lower than 17A/cm2. RP graphite electrode is mainly used in the ordinary power electric furnace for steelmaking, silicon smelting and yellow phosphorus refining etc.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Electric resistivity :
Bending strength:>=
Elastic Modulus: <=9
Bulk density:
Ash: <=
CTE:
Regular power graphite electrode is a graphite electrode with allowable current density lower than 17A/cm2. RP graphite electrode is mainly used in the ordinary power electric furnace for steelmaking, silicon smelting and yellow phosphorus refining etc.
Physical and Chemical Index of Hign Power Graphite Electrode: |
||||
Item |
Unit |
HP |
||
300~500 |
550~700 |
|||
Electric Resistivity |
Electrode |
uΩ.m |
~ |
~ |
Nipple |
~ |
|||
Bending Strength |
Electrode |
MPa |
≥ |
≥ |
Nipple |
≥ |
|||
Modulus of Elasticity |
Electrode |
GPa |
≤ |
|
Nipple |
≤ |
|||
Bulk Density |
Electrode |
g/cm3 |
~ |
|
Nipple |
~ |
|||
Ash Content |
Electrode |
% |
≤ |
|
Nipple |
||||
The Coefficient of Thermal Expansion(CTE) |
Electrode |
10-6/℃ |
~ |
|
Nipple |
~ |
High Power Graphite Electrode Current Carrying Capacity |
|||
Norminal Diameter |
HP |
||
Current Carrying Capacity |
Current Density |
||
inch |
mm |
A |
A/cm2 |
12 |
300 |
13000~17400 |
17~24 |
14 |
350 |
17400~24000 |
17~24 |
16 |
400 |
21000~31000 |
16~24 |
18 |
450 |
25000~40000 |
15~24 |
20 |
500 |
30000~48000 |
15~24 |
22 |
550 |
34000~53000 |
14~22 |
24 |
600 |
38000~58000 |
13~21 |
28 |
700 |
45000~72000 |
12~19 |
32 |
800 |
/ |
/ |
Tolerance of Graphite Electrode Diameter and Length(mm) |
|||||
Nominal Diameter |
Actural diameter |
Length |
|||
in |
mm |
max |
min |
Black surface min |
|
12 |
300 |
307 |
302 |
299 |
1800/2000 |
14 |
350 |
358 |
352 |
349 |
1800/2000/2200 |
16 |
400 |
409 |
403 |
400 |
1800/2000/2200 |
18 |
450 |
460 |
454 |
451 |
1800/2000/2200 |
20 |
500 |
511 |
505 |
502 |
2000/2200/2400 |
22 |
550 |
562 |
556 |
553 |
2000/2200/2400/2700 |
24 |
600 |
613 |
607 |
604 |
2200/2400/2700/3000 |
28 |
700 |
714 |
710 |
707 |
2200/2400/2700/3000 |
29 |
800 |
816 |
812 |
809 |
2200/2400/2700/3000 |
Permissible Deviation of Graphite Electrode Length (mm) |
||||
Nominal Length |
Standard Deviation |
Short Length Deviation |
||
max |
min |
max |
min |
|
1800 |
+100 |
-100 |
-100 |
-275 |
2000 |
+100 |
-100 |
-100 |
-275 |
2200 |
+100 |
-100 |
-100 |
-275 |
2400 |
+100 |
-100 |
-100 |
-275 |
2700 |
+200 |
-150 |
-150 |
-275 |
3000 |
+200 |
-150 |
-150 |
-300 |
Graphite heaters are widely used in various industrial furnace heating systems. They are characterized by high temperature resistance, uniform heating, resistance to chemical corrosion and long service life. It is the best choice for high temperature heating above 2300 ℃. We can produce different shapes of graphite heater according to the demands of the user.
Graphite heating element is widely used in kinds of heating system of industrial furnace. Ithas advantages of high temperature resistant, temperature uniformity, chemical resistance, long working life and so on. It is the best choice to high-temperature heating (above 2300*0). And we can produce heating elements with different shapes according to users* demands.
Graphite mold is widely used in all kinds of precision casting. It has the characteristics of high temperature resistance, high machining precision, uniform heat conduction and easy demoulding. With the development of science and technology, graphite mold will be used more widely in many fields.
Graphite mold is widely used in kinds of precision casting. It has advantages of high tempera-ture resistant, high machining accuracy, temperature welldistributed, easy demould and so on. With the development of science and technology, graphite mold will be bound to apply in more fields