Concrete Pole Machine, Concrete Pipe Making Machine, Button Head Machine Factory
The centrifuge is in the implementation international JC/T882 1,996 foundations, especially for the production annular reinforced concrete telephone pole
Specifications:
The centrifuge is in the implementation international JC/T882 1,996 foundations, especially for the production annular reinforced concrete telephone pole, distribution, and drainage pipe manufactures. Its principle is in makes the centrifugal force using the object which the circular motion produces, causes the concrete to carry on the synthesis dense processing,
enables in the unit concrete mixture through the centrifuge high
speed rotation to
obtain the quite big dense energy,
can enable the concrete compactness in a shorter time to meet the anticipated requirements.
Loses the design manufacture which, the discharge pipe gentrifugalism
takes shape to refer to the JC363 - 86 reinforced concrete to lo
Technical Parameter
top end inner diameter (mm) |
Tread (mm) |
Running wheel diameter (mm) |
Length (m) |
150 |
2000 |
600 |
7-12 |
170 |
2000 |
600 |
7-12 |
190 |
2000 |
650 |
7-15 |
230 |
2000 |
650 |
6-9 |
300 equal diameter |
2000 |
600 |
6-9 |
350 equal diameter |
2000 |
650 |
6-12 |
310 |
2000 |
650-780 |
6-15 |
Features
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.
Product Description
Centrifugal spinning machine for prestressed spun concrete electrical pole is a kind of mold equipment, which is used for producing reinforced concrete poles and other cement products with a variety of different diameter and length.
Centrifugal spinning machine for prestressed spun concrete pole is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes are good of quality.
The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are well sealed and reliable, long service. Random electric control equipment is complete and easy to operate.
Pole Mold Diameter (mm) |
Spinning wheel pitch(mm) |
Running wheel diameter (mm) |
Mold Length (m) |
150 |
2000 |
600 |
7-12 |
170 |
2000 |
600 |
7-12 |
190 |
2000 |
650 |
7-15 |
230 |
2000 |
650 |
6-9 |
300 equal diameter |
2000 |
600 |
6-9 |
350 equal diameter |
2000 |
650 |
6-12 |
30 |
2000 |
650-780 |
6-15 |
Saving a great deal of steel, about 30~70% (employ cold-drawn steel wire can save 30%~60%; employ high stress steel wire can save 40%~69%).
Crack resistance can increase by about 3~5 times.
Rigidity increases 1~3 times.
Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
Good durability, can delay the existence and expansion of cracks.
Protect the environment on which human beings depend on for existence, and reduce the deforestation.
Adding the slurry into the steel mold for concrete pole, it is driven quickly and rotating at the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
The speed of separation is slow when the viscosity of slurry is high.
It is good for centrifugal sedimentation when the slurry density is different in each component.
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.
Product Description
For the consistence feeding of concrete into mold, Automatic Concrete Feeding Machine is the solution. The feeding machine for concrete pole mainly consists of running gear, feeding system, pneumatic and electric control. The installation of groove rail in the running gear can avoid the blocking of scattered stones. The adoption of chain drive in transmission avoid the slip of the pulley; spiral feeding device can be configured according to user's application of symmetrical operation. In order to realize the distant wireless remote control, the wireless remote controller is installed so that reduce the working strength and promote production efficiency in pole production line.
Durable and reliable
Shortened working time
Reduce manpower
Efficient output to increase productivity
Improves consistency of concrete feeding
Smooth flow of concrete from feeder pipe into mold
Easy operation
Design according to customer requirement
Shandong Shengya supply Concrete Pole Machine, which include Concrete Pipe Making Machine, Button Head Machine, Our concrete electric pole machines have high quality and competitive prices.
Product Description
135G type lifting jack is a newly developed tensioning equipment by our company with a totally new concept. It mainly applies in the process of prestressed concrete pipe, telegraph pole, well pipe etc. Its application range nearly covers all common types of prestressed concrete pipe, pole,well pipe. The advancements of the equipment result from the adoption of the equal number to prestressed tendons of tension of small equipment and converting the concentrated force of pipe pile plank to uniform force, raising the tension effect of prestressed tendons of concrete pipe ,pole,well pipe obviously; By turning the large-tonnage jacks to several small-tonnage jacks, the work strength of tensioning will be lightened; with a set of equipment you can fulfill the tension of many kinds of concrete pipes,poles, well pipes, the investment of equipment will be also less. YC135G jack consists of main engine,rod components and fixed screw bolt components. It has the characters of compact size, light weight, easy operation and wide range of application.
ZB type high-pressure oil pump is a plunger type metering pump, also the power sources of the prestressed equipments like jacks. Its highest oil pressure can reach 63Mpa. YBZ type oil pump is a improved product of ZB type. Under the same power, same oil pressure, flow raises to 80 and selector valve is plane rotary valve with easy operation, meanwhile reducing the pressure fluctuation. YBZ4/50 oil pump has an additional stop valve which is also applicable to other kinds of hydraulic machinery of low flow,high pressure facilitating to keep the system at a certain pressure value. Accompanied with a multiplex control valve, a hydraulic pump station can be set up.
Parameter |
YBZ1/50 |
YBZ4/50 |
YBZ8/50 |
ZB2×2/50 |
Rated Oil Pressure(MPa) |
50 |
50 |
50 |
50 |
Motor Model |
YS802-4B5 |
Y100L2-4B5 |
2XY100L2-4B5 |
Y100L2-4B5 |
Motor Power(KW) |
3 |
2×3 |
3 |
|
Oil Pressure Capacity(L) |
8 |
50 |
100 |
50 |
Wight(Oil-free)(kg) |
25 |
106 |
160 |
120 |
External Dimension(mm) |
400×240×500 |
745×494×758 |
720×420×980 |
660×494×1080 |
YC135G Type Jack Machine |
|
Rated Oil Pressure |
50MPa |
Rated Pressure |
135KN |
Tension Area |
2700mm2 |
Working Stroke |
90mm |
Center Hole Diameter |
Φ |
Weight |
Shandong Shengya supply Concrete Pole Machine, which include Concrete Pipe Making Machine, Button Head Machine, Our concrete electric pole machines have high quality and competitive prices.
Hopper lift concrete batching plant belongs to compulsory and efficiency equipment, it can produce various kinds of concrete including
Product Description
Hopper lift concrete batching plant belongs to compulsory and efficiency equipment, it can produce various kinds of concrete including quaking concrete and hard concrete, with high produce efficiency, it is widely used medium scale building works, road and bridge works and concrete products prefabrication plants, and is an ideal equipment to produce commercial used concrete.
The main machine of this series use JS series double shaft compulsory mixer, it can mix concrete evenly, with a short period of mixing, long time wearing parts, it can be operated and maintained conveniently, it used control technology with newest deign concept, for example: electric weighing, computer control, digital display, etc. Electric weighing has been equipped with buffer device and auto compensation function and the measure precision is high.
The sand and stone feeding system use flat belt or herringbone belt, and equipped with maintenance sidewalk, it is the ideal selection for the construction units to produce high quality concrete.
Our machine with the best quality and the lowest price.
The plant is widely used in many field.
Concrete batching machine contain concrete batching equipment, material supply, batching system ,electric weighing, steel structure, and computer control.
It is ideal equipment for building project, building ground and precast product factory.
The machine adopts JS concrete mixer, it has good mixing quality and high efficiency.
The batching machine adopts PLD series, it is measuring nicety and high produce efficiency. The cement is store in cement silo and feeding by screw conveyor. The water supply system is composed by water tank, water pump and water wager.
The whole batching machine and mixing course is automatism by electrical control system(it also can be controlled by hand).
The structure is easy and simple to install and debug .It is adopts advanced system and imports component with high dependability.
Type |
HZS25 |
HZS35 |
HZS50 |
HZS75 |
Capacity (m3/h) |
25 |
35 |
50 |
75 |
Mixing Time (s) |
60 |
60 |
60 |
60 |
Max Aggregate Size(mm) |
60/80 |
60/80 |
60/80 |
60/80 |
Discharging Height(mm) |
3800 |
3800 |
3800 |
3800 |
Total Power (kW) |
60 |
70 |
80 |
90 |
Total Weight (Ton) |
25 |
30 |
50 |
54 |
Total Dimensions (m) |
15×8×12 |
18×10× |
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.
The bridge crane is a hoisting equipment to hoist materials across over the workshop, warehouse and stock ground. The bridge shape results from its two ends sitting on the high concrete pillars or metal holders. The crane span structure moves longitudinally on the rails laying on the elevated holder of two sides facilitating the full use of the space below the span structure to hoist the materials without the block of ground equipments. It's one of the most widespread used and largest hoisting equipment.
The machine structure mainly consists of main beam, cross beam, gantry travel mechanism and trolley travel mechanism. The crane is a light and heavy type hoisting crane and the working system is applicable to A3-A7. Working environmental temperature within-25℃-40℃; lifting wight is 2t-550t; applicable to the span of the operating forms of electrical equipment include wireless and wired ground operation and cab operation.
The product is a regular crane mainly used to load and unload materials in the places of mechanical manufacturer, coal mine and chemical industry.
The products is not suitable to work in the medium of inflammable or explosive and the places with high humidity and corrosive gases and also the work of hoisting molten metal, poisonous substances and inflammable substances.
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.
Block Making Machine, Interlocking Block Machine, Concrete Pole Machine FactoryVertical coal-fired boiler, A head, drum, top Furnace, Furnace, bending pipe and other components.
Vertical coal-fired boiler, A head, drum, top Furnace, Furnace, bending pipe and other components. Vertical bending the structural features of water-tube boilers are: Furnace that has the curved pipe, increasing the radiation heating surface. However, a larger Furnace water level, lower the oven temperature, therefore, generally suitable for burning high quality coal. Such as the increase in the furnace refractory bricks, to maintain a high temperature, can also use the low quality coal species. Better water circulation.
Using double-grate combustion chamber, heating quickly, can burn once again, to achieve full combustion, eliminating smoke, dust removal effect. Reasonable layout of the boiler structure, good heat transfer.
The boiler design is reasonable, simple structure, convenient operation, easy maintenance, small footprint, low investment and production of steam and heating can be used for enterprises and units.
the furnace compared with the old vertical boiler, heating area bigger, faster step-heating, less coal consumption, higher thermal efficiency, can save 25-30% of coal.
a multi-purpose boiler, the furnace production of steam can be used in canteens steaming rice, tableware disinfection, baths heating, steam production, room heating and so on.
the furnace uses natural ventilation, do not blowers and induced draft fan and no noise.
compact structure, easy installation, simple operation, easy maintenance, can whole removal, the unit for mobile use.
baths with steam heating, food, heating, steam rice, etc., work pressure can not exceed the design pressure,does not allow super-pressure operation.
LD type series of heading machine is a special equipment for construction of prestressed project, and it can heading steel wire with the nominal diameter of Φ4、Φ5~Φ. The diameter of upper heading is more than times than the one of the steel wire. The use of hydraulic heading, hydraulic return in LD200C,LD300,LD400A,LD600 raises the return speed of the heading. AS all sliding seals use the Gled Ring and step seal as seals, the sealed effect is better, and the bearing capacity is higher, what's more, the resistance to wear gets better, the maintenance cost is very low and the service life is longer. The two-body design of heading mold facilitates the change of parts and improve the durability.
LD100A is a improved product on the basis of LD100. After improving, it can heading the steel wire with the specification of Φ4,Φ5 and increase the clamping force as well as improve the ability of clamping piece to clamp steel wire so that avoid the failure of threaded connection.
LD200C is a special heading machine for heading Φ7 prestressed steel wire.
LD300 is a special heading machine for heading Φ9 prestressed reinforcing steel(SBPL1275/1420).
LD400A is a special heading machine for heading Φ prestressed steel bar(SBPL1275/1420).
LD600 is a special heading machine for heading Φ prestressed steel bar(SBPL1275/1420).
Concrete Pipe Making Machine (SY1000):
Technique Parameter:
1)Rated Power:
2)Standard: GB11836-89
3)Tube Specification: 200-1000mm
4)Concrete tube and pipe making machinery
Intrduction of SY1000 Concrete tube making machinery
SY Series Tube Machines are ideal equipment for producing concrete tubes, now. It is reasonable in design, beautiful in appearance, reliable in performance and convenient in operating. Its quality is up to State Standards of GB11836-89. With this series of machines, the concrete tubes with specifications of 200 -1000mm can be produced by using pulverized coal ash, slag, sands and crushed stone pulsing little quantity of cement.
The tubes produced with this series machines are even in their wall thickness, smooth on surface, high in compression strength, convenient and firm in connection, and excellent in anti-seeping, which are widely used in agricultural irrigation and draining projects in cities.
Power |
22 kw |
Overall Size |
2200×1600×4150mm |
Vibration Frequency |
|
Electrical source |
380V/50Hz |
Total Mass |
3000kg |
Introduction for SY tube making machine:
Concrete Pipe Making Machine is a kind of perfect machine and equipment to produce reinforced concrete pipes and Pre-stressed concrete pipe.
This machine is capable to make pipes with diameter from 300-2000mm and with length from2-4meters.
We can design many kinds of the pipe joint, including flush joint, socket& spigot joint.
And all the concrete pipes are widely used in administrative drainage, agricultural field irrigation, road culvert and deep water well.
Adventages for SY tube making machin:
1,High production efficiency, lower labour intensity, immediately demoulding after forming so as to save time and labour.
2,One mould for multi-purpose: one mould can be used for various size pipes with process production, it reduces the pipe mould fees investment and floor space.
3,Vibration frequency adjustable is available that can result in high concrete close-grained performance and anti-water-permeability.
4,Dry concrete with high-frequency forming, no concrete segregation role.
5,Lower framework deformation, high structure, accurate size.
6, Naturally maintenance.
7,Underground forming, no potential safety hazard.
8, little environmental pollution, lower water consumption within productive process.
Working principle for SY tube making machine:
This machine uses the Roller to support the pipe mould, and produce the roller force to concrete in the mould.
When the roller rotate at a high speed, the concrete in the mould will spread in the inner wall of the pipe mould and form a cement pipe with the centrifugal force, and when the mould with the inner concrete pass on the roller, the concrete between the mould and the roller will be compacted solid to form a pipe.
Shandong Shengya supply Concrete Pole Machine, which include Concrete Pipe Making Machine, Button Head Machine, Our concrete electric pole machines have high quality and competitive prices.
Brief Introduce of QT10-15 automatic cement brick making machine
Other information for QT10-15 fully automatic brick making machine.
Shandong Shengya supply Brick Making Machine, which include Movable Block Making Machine and High Pressure Block Making Machine, and is now the leading block making machine manufacturer within the Tanzania, Nigeria.
Main advantages as follows:
Technology principle
Raw materials after screening and crushing, through pressure and vibration, become one-time and final molding blocks.
High efficiency:
it could produce 34 bricks/board every 15 seconds, as for the hollow blocks, it could produce 6 pieces. therefore, it could produce 65-70 thousand bricks every 8 hours.
Raw materials:
wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes, chemical residue, sand, stone, concent, cement, construction wastes and so on. therefore, it is a new type of machine which has the characteristics of energy conservation and environmental protection.
Shandong Shengya is One of the Manufacturer of Automatic Block Machine. We designed various new models in fully automatic Interlocking Bricks Machine.
1)Not using the clay as raw material to destroy any field.
2)Making use of three industrial wastes to change wastes into valuables.
3)Not using fire to bake blocks and not building kiln to save the energy sources and fields.
4)No chimney to protect the environment and avoid pollution.
5)Production process is simple, they can be made everywhere.
6)Low investment and achieving much faster results, customers can profit in half a year after investing.
7)The block can be produced all around the year.
8)Good looking, construction convenient, low-floor real jigsaw puzzle, and the high buildings do filler and cheap.
9)Technical criteria is better than those of red brick and green brick.
Our worker will test the machine for making blocks before we sent it out, So please rest assure.
We have our own long cooperate shipping company, they can offer the best freight. And if you would like, we can use your shipping company to sent the machines.
1)Product Name |
QT4-40 New Model!! Hydraulic Gypsum Block Making Machine |
|
2)Standards |
ISO9001/CE |
|
3)Overall-Size |
2000(L)*1500(W)*2100(H)mm |
|
4)Cycle |
40 Seconds for one sheet |
|
5)Production Capacity |
400*200*200MM(4pcs/sheet)400*150*200MM(5pcs/sheet)240*115*53MM(26pcs/sheet) |
|
6)Raw Material |
Concrete, sand, cement and others |
in your condition |
7)Carriage Size |
Plastic pallet Bamboo pallet Wooden pallet |
850(L)*470(W)*18(H)mm850(L)*470(W)*20(H)mm850(L)*470(W)*25(H)mm |
8)Vibration Frequency |
||
9)Electrical Source |
Diesel engine |
We can equip motor according to your electricity request(For the area without power supply, we can help you to buy a generator of 15 KW) |
10)Weight |
2000kg |
|
11)Packing |
Sheet iron or nude |
Depend on how many the customer order |
12)Price Term |
FOB Qingdao, China |
CFR,CIF |
11)Shipping Method |
By Sea |
|
13)Payment Terms |
T/T, L/C, West Union |
|
14)Production Time |
20-30 days after got 30% deposit |
Shandong Shengya supply Brick Making Machine, which include Movable Block Making Machine and High Pressure Block Making Machine, and is now the leading block making machine manufacturer within the Tanzania, Nigeria.
Block Making Machine, Interlocking Block Machine, Concrete Pole Machine Factory
Why is it good for you?
1, Multiusage. By changing different moulds. Different size of bricks would be made easily and quickly. For example: solid bricks, color paver bricks, lawn bricks, hollow bricks, perforated cellular bricks, curb bricks, and water conservancy revetment bricks and so on. which are widely used in the construction of municipal works, buildings, garden sand roads and its productivity is very high.
2, Multiple Materials. By making use of fly ash, cement, concrete, and other industrial wastes are available.
3, Easy operation with low consumption, equiped with reliable system, which make the machine's lifespan prolonged.
4, Suitable for the small or middle investors. Good economic profits would be made. Bricks could be piled up to 3-5 layers immediately after shaping. Pallets cost would be reduced.
5, Convenient maintenance.
Our company is engaged in manufacturing and export of semi automatic block machine, that are specially designed for concrete block making in construction industry.
Block Making Machine, Interlocking Block Machine, Concrete Pole Machine Factory
Why is it good for you?
1, Multiusage. By changing different moulds. Different size of bricks would be made easily and quickly. For example: solid bricks, color paver bricks, lawn bricks, hollow bricks, perforated cellular bricks, curb bricks, and water conservancy revetment bricks and so on. which are widely used in the construction of municipal works, buildings, garden sand roads and its productivity is very high.
2, Multiple Materials. By making use of fly ash, cement, concrete, and other industrial wastes are available.
3, Easy operation with low consumption, equiped with reliable system, which make the machine's lifespan prolonged.
4, Suitable for the small or middle investors. Good economic profits would be made. Bricks could be piled up to 3-5 layers immediately after shaping. Pallets cost would be reduced.
5, Convenient maintenance.
Our company is engaged in manufacturing and export of semi automatic block machine, that are specially designed for concrete block making in construction industry.
This egg laying block Machine is manufactured on the base of technical modifications to the original block shaping machines, that is, changing the former one-time-vibration into twice-vibrations of molding core, so, the block density becomes higher, shaping speed quicker and block strength more even, this model of machine can suitable to the customers who have any kinds of ceasing concrete working sites, and the consumption carriage can be reduced.
Buy low price, high quality movable block making machine, choose our movable concrete block machines, Shandong Shengya is the leading Electric Mobile Block Machine factory, Warmly welcome new and old customers to visit and patronize!
Advancetage of mobile block making machine QMY10-15 concrete block making machine for sale
So the block density becomes higher, shaping speed quicker and block strength more even. This model of machine can be suitable to the customers who have any kinds of existing cement working sites.
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.
Introduction of SY7502 Hydraulic interlocking block making machine:
The machine uses 4 frame types and 4 locations, so it has large worktable, cheap price, simple operation, low labor intensity and high efficiency. It can produce every kinds of building blocks less than 600 * 400 * 200mm, especially suitable for producing original color or color paving bricks, grass planting bricks, adiabatic and heat preservative bricks, surrounding tee bricks, protective lop building blocks and ditch building blocks.
SY7502 is semi automatic hydraulic brick making machine, its advatage is high press, it can reach 80-100 tons pressure.
This machine can produce high quality pavers, interlocking bricks and lego blocks.
Find here details of Shandong Shengya selling Lego Brick Machine. All the Fully Automatic Interlocking Brick Machine s with super quality and competitive price. Our company is a leader in the Paver Block Making Machine industry and we will not disappoint you.
Paving Brick Machine, Hydraulic Concrete Block Machine, Tiger Stone Machine Factory
Main advantages as follows:
Technology principle
Raw materials after screening and crushing, through pressure and vibration, become one-time and final molding blocks.
High efficiency:
It could produce 34 bricks/board every 15 seconds, as for the hollow blocks, it could produce 6 pieces. therefore, it could produce 65-70 thousand bricks every 8 hours.
Raw materials:
Wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes, chemical residue, sand, stone, concent, cement, construction wastes and so on. therefore, it is a new type of machine which has the characteristics of energy conservation and environmental protection.
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.
Movable Block Making Machine, Brick Making Machine, High Pressure Block Making Machine Supplier
SY6-400, SY5-400, SY4-400, SY3-400 Tiger stone machine; interlocking paving bricks laying machine, interlocking bricks paver machine, pavement blocks paving machine.
Tiger stone machine function is laying pavers on street, it will save time and labors. We have 4 different sizes tiger stone machine, the difference is width.
SY6-400 width is 6 meters
SY5-400 width is 5 meters
SY4-400 width is 4 meters
SY3-400 width is 3 meters
Shandong Shengya has been committed to the research and development, production and sales of block making machine and concrete pole machine with a state-of-the-art equipment, R & D center is always in interlocking block machine market development cutting-edge.