Feature
Support EPON and GPON Mode, and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support WIFI Interface and multiple SSID
Support QoS and DBA
Support port Isolation and port vlan configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration
Support Port Forwarding and Loop-Detect
Support TR069 remote configuration and maintenance
Support CATV interface for Video Service
Support POTS interface for Voip Service
Specialized design for system breakdown prevention to maintain stable system
Specification
Technical item | Details |
PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
Receiving sensitivity: ≤-27dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | Tx: 1310nm, Rx: 1490nm |
Optical Interface | SC/UPC Connector |
LAN Interface | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
LED | 8, For Status of POWER, LOS, PON, SYS, LAN , WPS, Internet |
Push-Button | 3,For Function of Reset, WLAN, WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60 |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/500mA |
Power Consumption | ≤6W |
Dimension |
155mm×92mm×34mm(L×W×H) |
Net Weight |
Item | EPON 4 PON Port |
Service Port | 4 * PON port, 8 * GE RJ45, 4*GE SFP optical |
Redundancy Design | Dual Voltage Regulators |
Power Supply | AC: input100~240V * 2 47/63Hz |
Power Consumption | ≤45W |
Dimensions (Width x Depth x Height) |
440mm×44mm×260mm |
Weight (Full-Loaded) | ≤ |
Environmental Requirements | Working temperature: -10°C~55°C Storage temperature: -40°C~70°C Relative humidity: 10%~90%, non-condensing |
Item | EPON OLT 4 PON Port | |
PON Features | IEEE EPON China Telecom/Unicom EPON Maximum 20 Km PON transmission distance Each PON port supports the max 1:64 splitting ratio Uplink and downlink triple churning encrypted function with 128Bits Standard OAM and extended OAM ONU batch software upgrade, fixed time upgrade, real time upgrade |
|
L2 Features | MAC | MAC Black Hole Port MAC Limit 16K MAC address |
VLAN | 4K VLAN entries Port-based/MAC-based/protocol/IP subnet-based QinQ and flexible QinQ (StackedVLAN) VLAN Swap and VLAN Remark PVLAN to realize port isolation and saving public-vlan resources |
|
Spanning Tree | STP/RSTP Remote loop detecting |
|
Port | Bi-directional bandwidth control for onu Static link aggregation and LACP(Link Aggregation Control Protocol) Port mirroring |
|
SecurityFeatures | User’s Security |
Port Isolation MAC address binding to the port and MAC address filtering |
Device Security |
Anti-DOS attack(such as ARP, Synflood, Smurf, ICMP attack), ARP SSHv2 Secure Shell Security IP login through Telnet Hierarchical management and password protection of users |
|
Network Security |
User-based MAC and ARP traffic examination Restrict ARP traffic of each user and force-out user with abnormal ARP traffic Dynamic ARP table-based binding IP+VLAN+MAC+Port binding L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet Port-based broadcast/multicast suppression and auto-shutdown risk port |
|
Service Features | ACL | Standard and extended ACL Time Range ACL Flow classification and flow definition based on source/destination MAC address, VLAN, , ToS, DiffServ, source/destination IP(IPv4) address, TCP/UDP port number, protocol type, etc packet filtration of L2~L7 deep to 80 bytes of IP packet head |
QoS | Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and Priority remark to port or self-defined flow and provide , DSCP priority and Remark Packet mirror and redirection of interface and self-defined flow Super queue scheduler based on port or self-defined flow. Each port flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR. Congestion avoid mechanism, including Tail-Drop and WRED |
|
IPv4 | DHCP Relay DHCP Server Static Routing |
|
Multicast | IGMPv1/v2/v3 IGMPv1/v2/v3 Snooping IGMP Fast leave |
|
Reliability | Loop Protection |
Loopback-detection |
Link Protection | RSTP LACP |
|
Device Protection |
1+1 power hot backup | |
Maintenance | NetworkManagement | Port real-time, utilization and transmit/receive statistic based onTelnet Ethernet OAM RFC 3164 BSD syslog Protocol Ping and Tracerout |
DeviceManagement | CLI, Console port, Telnet and WEB RMON (Remote Monitoring)1, 2, 3, 9 groups MIB NTP Network management System (NMS) |
Product Overview:
EPON OLT is a high integration and medium capacity cassette EPON OLT designed for operators’ access and enterprise campus network. It follows the ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements . EPON OLT series possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction.
There are two kinds of specifications OLT. The OLT provides 4/8 downlink ports, 8 * GE LAN Ethernet ports and 4 *10G SFP for uplink. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU hybrid networking.
Item | EPON OLT 4/8 PON Port | |
PON Features | IEEE EPONChina Telecom/Unicom EPONMaximum 20 Km PON transmission distance
Each PON port supports the max. 1:64 splitting ratio Uplink and downlink triple churning encrypted function with 128Bits Standard OAM and extended OAM ONU batch software upgrade, fixed time upgrade, real time upgrade |
|
L2 Features | MAC | MAC Black HolePort MAC Limit16K MAC address |
VLAN | 4K VLAN entriesPort-based/MAC-based/protocol/IP subnet-basedQinQ and flexible QinQ (StackedVLAN)VLAN Swap and VLAN Remark
PVLAN to realize port isolation and saving public-vlan resources |
|
Spanning Tree | STP/RSTPRemote loop detecting | |
Port | Bi-directional bandwidth control for onuStatic link aggregation and LACP(Link Aggregation Control Protocol)Port mirroring | |
SecurityFeatures | User’s Security | Port IsolationMAC address binding to the port and MAC address filtering |
Device Security | Anti-DOS attack(such as ARP, Synflood, Smurf, ICMP attack),ARPSSHv2 Secure ShellSecurity IP login through Telnet
Hierarchical management and password protection of users |
|
Network Security | User-based MAC and ARP traffic examinationRestrict ARP traffic of each user and force-out user with abnormal ARP trafficDynamic ARP table-based bindingIP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet Port-based broadcast/multicast suppression and auto-shutdown risk port |
|
Service Features | ACL | Standard and extended ACLTime Range ACLFlow classification and flow definition based on source/destination MAC address, VLAN, , ToS, DiffServ, source/destination IP(IPv4) address, TCP/UDP port number, protocol type, etcpacket filtration of L2~L7 deep to 80 bytes of IP packet head |
QoS | Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor andPriority remark to port or self-defined flow and provide , DSCPpriority and RemarkPacket mirror and redirection of interface and self-defined flow
Super queue scheduler based on port or self-defined flow. Each port flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR. Congestion avoid mechanism, including Tail-Drop and WRED |
|
IPv4 | ARP ProxyDHCP RelayDHCP ServerStatic Routing
OSPFv2 |
|
Multicast | IGMPv1/v2/v3IGMPv1/v2/v3 SnoopingIGMP Fast leaveIGMP Proxy | |
Reliability | Loop Protection | Loopback-detection |
Link Protection | RSTPLACP | |
Device Protection | 1+1 power hot backup | |
Maintenance | Network Maintenance | Port real-time, utilization and transmit/receive statistic based on Telnet Ethernet OAMRFC 3164 BSD syslog Protocol
Ping and Traceroute |
Device Management | CLI, Console port, Telnet and WEBRMON (Remote Monitoring)1, 2, 3, 9 groups MIBNTP
Network management |
Purchase Information:
Product name | Product description |
EPON OLT 8PON L3 |
8 * PON port, 8 * GE, 4 * 10G SFP, double AC power supply |
EPON OLT 4PON L3 |
4* PON port, 8 * GE, 4 * 10G SFP, double AC power supply |
Application :
With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
Technical Parameters
Technical Parameters for 10/100M Adaptive Fast Ethernet Optical Media Converter |
||||||||||
Number of Network Ports | 1 channel | |||||||||
Number of Optical Ports | 1 channel |
|
||||||||
NIC Transmission Rate | 10/100 Mbit/s | |||||||||
NIC Transmission Mode | 10/100M adaptive with support for automatic inversion of MDI/MDIX | |||||||||
Optical Port Transmission Rate | 100Mbit/s | |||||||||
Operating Voltage | AC 220V or DC +5V | |||||||||
Overall Power | <1W | |||||||||
Network Ports | RJ45 port | |||||||||
Optical Specifications | Optical Port: SCMulti-Mode: 50/125, Single-Mode: , , 8/125,10/125um | |||||||||
Data Channel | and collision base backpressure supportedWorking Mode: Full/half duplex supported Transmission Rate: 100Mbit/swith error rate of zero | |||||||||
Some Product Modes and port Technical Parameters of Optical Port |
||||||||||
Desk Type Dual-Optical Single-Mode/Multi-Mode Media Converter |
||||||||||
P/N |
Wavelength (nm) |
Optical Port |
Electric Port |
Optical Power (dBm) |
Receiving Sensitivity (dBm) |
Transmission Range (km) |
||||
8110MA-05V-8S |
850 |
SC | RJ-45 |
-8~ -3 |
≤-19 |
|||||
8110MA-2F-3S |
1,310 |
SC | RJ-45 | -20~ -15 |
≤-34 |
2 |
||||
8110SA-10F-5S |
1,550 |
SC | RJ-45 |
-15~ -8 |
≤-34 |
10 |
||||
8110SA-20F-3S |
1,310 |
SC | RJ-45 | -15~ -3 |
≤-34 |
20 |
||||
8110SA-40F-3S |
1,310 |
SC | RJ-45 | -8~ -3 |
≤-34 |
40 |
||||
8110SA-60F-3S |
1,310 |
SC | RJ-45 | -5~0 |
≤-34 |
60 |
||||
8110SA-80D-5S |
1,550 |
SC | RJ-45 | -5~0 |
≤-34 |
80 |
||||
8110SA-100D-5S |
1,550 |
SC | RJ-45 | -3~3 |
≤-36 |
100 |
||||
8110SA-120D-5S |
1,550 |
SC | RJ-45 | 0~5 |
≤-36 |
120 |
||||
Desk Type Single-Optical Two-Way Media Converter |
||||||||||
P/N | Wavelength (nm) | Optical Port | Electric Port | Optical Power (dBm) | Receiving Sensitivity (dBm) | Transmission Range (km) | ||||
8110MB-2F-3S |
1,310 |
SC | RJ-45 | -20~ -15 |
≤-34 |
2 |
||||
8110MB-2F-5S |
1550 |
SC | RJ-45 | -20~ -15 |
≤-34 |
2 |
||||
8110SB-10F-3S |
1,310 |
SC | RJ-45 | -15~ -8 |
≤-34 |
10 |
||||
8110SB-10F-5S |
1,550 |
SC | RJ-45 | -15~ -8 |
≤-34 |
10 |
||||
8110SB-20F-3S |
1,310 |
SC | RJ-45 | -15~ -3 |
≤-34 |
20 |
||||
8110SB-20F-5S |
1,550 |
SC | RJ-45 | -15~ -3 |
≤-34 |
20 |
||||
8110SB-40F-3S |
1,310 |
SC | RJ-45 | -8~ -3 |
≤-34 |
40 |
||||
8110SB-40F-5S |
1,550 |
SC | RJ-45 | -8~ -3 |
≤-34 |
40 |
||||
8110SB-60F-3S |
1,310 |
SC | RJ-45 |
-5~0 |
≤-34 |
60 |
||||
8110SB-60D-5S |
1,550 |
SC | RJ-45 |
-5~0 |
≤-34 |
60 |
||||
8110SB-80D-3S |
1,310 |
SC | RJ-45 |
0~5 |
≤-34 |
80 |
||||
8110SB-80D-5S |
1,550 |
SC | RJ-45 |
-5~0 |
≤-34 |
80 |
||||
8110SB-100D-5S |
1,550 |
SC | RJ-45 |
-3~3 |
≤-36 |
100 |
||||
8110SB-100D-4S |
1,490 |
SC | RJ-45 |
-3~3 |
≤-36 |
100 |
||||
8110SB-120D-5S |
1,550 |
SC | RJ-45 |
0~5 |
≤-36 |
120 |
||||
8110SB-120D-4S |
1,490 |
SC | RJ-45 |
0~5 |
≤-36 |
120 |
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter |
||
Number of Network Ports | 1 channel | |
Number of Optical Ports | 1 channel | |
NIC Transmission Rate | 10/100/1000Mbit/s | |
NIC Transmission Mode | 10/100/1000M adaptive with support for automatic inversion of MDI/MDIX | |
Optical Port Transmission Rate | 1000Mbit/s | |
Operating Voltage | AC 100-220V or DC +5V | |
Overall Power | <3W | |
Network Ports | RJ45 port | |
Optical Specifications | Optical Port: LC (Optional) Multi-Mode: 50/125, Single-Mode: , , 8/125,10/125um Wavelength: Single-Mode: 1310/1550nm |
|
Data Channel | and collision base backpressure supported Working Mode: Full/half duplex supported Transmission Rate: 1000Mbit/s with error rate of zero |