Long Teng horizontal slurry pump Application:
M, SH, HH series pumps contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, building etc. This kind of pump can be used in multi-stages.
slurry pump for sale body consist of replaceable metal or rubber lining and its impeller is made of wear resistant metal or rubber. HH series lining and impeller are made of wear resistant shaft seal of M, SH and HH series pump may adopt packing seal or centrifugal outlet can be spaced by 45。and installed by rotating eight different angles as per requirement.
slurry pump manufacturers SELECTION:
Selection As Per Performance Curve
@ M, SH series
High concentration, High corrosion slurry, Capacity: 40~80%
Medium concentration, Medium corrosion slurry, Capacity: 40~100%
Low concentration, Low corrosion slurry, Capacity: 40~120%
@ HH Series
Medium concentration, Medium corrosion slurry, Capacity: 40~80%
Low concentration, Low corrosion slurry, Capacity: 40~100%
(Maximum efficiency point Capacity is 100% under certain rotation speed.)
Learn more information about our pump,you can visit our website
Rubber Lined Slurry Pump
SH(R)series pumps contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy mine coal power building etc. This kind of rubber lined pumps manufacturer can be used in multi stages. SH(R) pump body consist of replaceable rubber lining and its impeller is made of wear resistant rubber. The shaft seal of SH(R) series pump may adopt packing seal or centrifugal seal.
SH(R)series Long Teng industrial pumps contain cantilever and horizontal centrifugal pumps, which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, building etc. This kind of pump can be used in multi stages.
SH(R) pump body consist of replaceable rubber lining and its impeller is made of wear resistant rubber.
The shaft seal of SH(R) series high pressure slurry pump may adopt packing seal or centrifugal seal.
Submersible Pump
SP、SPR pumps are vertical centrifugal submersible slurry pumps that is in liquid to handle abrasive large particle and high concentration slurries. centrifugal slurry pump for sale can operate normally without shaft gland and shaft gland water even lack of intake. SP pump body is made from antifriction metalthe impeller is made from antifriction metal or rubber and polyurethane. Submerged parts of the SPR pump coated rubber for transportation corrosive slurry.
Long Teng submersible mud pump Applications
The SPR and SP designs, manufactured in popular metric sizes, provide a simple, yet rugged range of sump pumps specially developed for:
Abrasive and/or corrosive slurries
Large particle size
High slurry densities
Continuous or “snore” operations
Heavy duties demanding cantilevered shafts
Design Features
Bearing Assembly -
The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly of rubber lined pumps manufacturer is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly -
Completely fabricated from mild steel. The SPR model is
elastomer covered.
Casing -
Has a simple bolt-on attachment to the base of the column. It is manufactured
from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Impeller -
Double suction impellers (top and bottom entry) induce low axial bearing
loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Upper Strainer -
Drop-in metal mesh; snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
Lower Strainer -
Bolted metal or polyurethane for SP; moulded snap-on elastomer
for SPR.
Discharge Pipe -
Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.
Submerged Bearings -
None
Agitation -
An external agitator spray connection arrangement can be fitted to the
rubber lined centrifugal pumps as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials -
Pumps can be manufactured in abrasive and corrosive resistant materials.
WQ Series Submersible Sewage Pumps
WQS series of deephigh-lift submersible sewage pump is used in Yangtze River Three Gorges Development processfull use of advanced CFD and flow field diagnostics and make a lot of experimental researchdesign and structure of the components in the hydraulic design of a conventional submersible sewage pump break through the traditional design success of the product to fill a high head sewage pump deep dive blankat advanced international levelalso the hydraulic horizontal centrifugal pump industry in China designed to enhance a new level.
self priming centrifugal pump manufacturer Use and model:
Deep type high lift submersible sewage pump with high head, wear resistant,high reliability, no congestion, automatic installation,automatic control, and can lift all the advantages of working in the high head, large subduction depth, water level changes large amplitude, the carriage with some abrasive media aspects of solid particles with unique features.
Long Teng vertical slurry pump Conditions of Use
maximum media temperature is +40℃
value is 5 to 9
Deep type high lift horizontal centrifugal slurry pump model shows some examples:
WQS190-80-115(example)
Deep type high lift submersible sewage pump
190 m3/h Rated flow m3/H
80 m Rated lift m
115 KW Motor power KW
50-500m3/h, 40-110m,380V,50HZ.
The series of centrifugal pumps for sale flow rate range of 50-500m3/h,head range of 40-110m power less than 115KW,Rated voltage of 380V,frequency 50HZ.
Perferred Use:
Deep type high lift pump submersible sewage pump coaxial,compact wet system uses automatic coupling and installation of high accuracy of the system can be easily installed within 100 meters high and upgrade pump,no installation or maintenance staff to enter pools,fast and convenient and safe!The system uses a special base,fixed to the bottom of the pool,connected with a specific bracket,along the rail down position to reach the export base through the pump weight,automatic coupling seals, more information please click here.
ZJL Pump
ZJL pump is a single-stage single-suction vertical type centrifugal slurry pump wholesale. The ZJL series pumps use international advanced solid-liquid two-phase flow theory and are designed using the Minimum-Wear Principle. Geometry of flow passage components accords with flow state of medium and reduces hydraulic loss partially in vortex impact or along the way reducing the wear of flow passage components improving hydraulic efficiency and reducing running noise and vibration; the series of flow passage components are made of high hard alloy cast iron which has high antiwear property corrosion resistance and impact resistance improving the service life.
ZJL slurry pumps manufacturer doesn't need any shaft seal and seal water when it generally immerses the pool or pit to work, and. The series of submerged pump with lengthening shaft is suitable for working condition with deep liquid level. The series of power Slurry Pump is suitable for conveying abrasive and corrosive slurry with solid particles in mining, metallurgy, power, coal, chemical industry, building materials and other industries, and maximum weight concentration of solid-liquid mixture is: Mortar 45%, ore pulp 60%.
Pump Parts
100% Interchangeable with AH(R) HH G Long Teng Slurry Pumps.
Both metal or rubber slurry pump parts are available
High chrome white iron with different
Cr content or rubbers for different applications.
AH: ~20/18
HH: ~6/4
slurry pump spare parts M/L: 200mm~50mm
G: 6/4 ~14/12
SP:
All OEM no. or symbols are only for reference
For more information,please don't hesitate to contact us now!
Long Teng Slurry Pump
The current Horizontal Slurry Pump China is commonly utilized in mining, electrical power, metallurgy, environmental protection, petrochemical, new structure products and also various other markets to transport slurry including strong fragments
The wholesale slurry pump has a vast efficiency array, good cavitation efficiency and also high effectiveness. Multi-stage tandem technology can be used to fulfill long-distance transportation. There are a range of steels available for overcurrent parts, as well as boost the deepness. Using numerous rates and also several versions allows the slurry pump for sale to run in a better industrial and mining setting. It has a long life span and also high operating effectiveness, and also can meet many kinds of harsh transportation problems.
Slurry pumps for sale
Slurry pumps are primarily made use of in dredging, mining, metallurgy, metropolitan, electric power, coal, thermal power flue gas desulfurization, petroleum, chemical, and also structure products sectors to transfer slurry consisting of abrasive solid particles. Such as beneficiation in a mine
The transportation of medium slurry, the hydraulic ash removal of thermal nuclear power plant, the coal slurry and also hefty tool transport of coal cleaning plants, as well as the transportation of some corrosive slurry having crystals in the chemical industry.
On top of that, in the field of seawater sand selection, the application fields of slurry pumps wholesale have likewise raised. Yet pick sand in the sea as well as dig sand in the river. Slurry pumps are called gravel pumps and also dredging pumps. Although they are called in different ways, they can all be called China slurry pumps in terms of architectural attributes and pump performance characteristics. Slurry pumps are commonly made use of in different sectors.
More information via
HH Slurry Pump
The slurry pump is a vertical single-stage single-suction cantilever centrifugal pump framework. The impeller is a semi-open impeller, as well as there is a mixing blade at the extension of the suction side of the impeller. It is gotten in touch with the motor via the flexible combining, and the Long Teng Vertical Sump Pump revolves clockwise from the instructions of the prime mover. Mainly made use of in environmental management, metropolitan engineering, thermal power plants, coal gas coking plants, oil refineries, steel mills, mining plants, cement plants, food plants, printing as well as coloring markets and also various other sectors to pump focused liquid, hefty oil, oil residue, dirty liquid, mud, Mortar, mire and flowing sludge in city sewer channels, along with liquids and also corrosive fluids including mud and also sand residues.
Large-scale Professional Slurry Pumps Manufacturer do daily upkeep work, such as:
( 1) Keep the tools tidy, dry, without oil and also leakage.
( 2) Check whether the pump's running noise is typical, whether there is vibration or leakage, etc., and also if any troubles are found, they ought to be managed in time.
( 3) Check whether the oil degree in the brace is appropriate everyday. The proper oil degree is near the oil level line and also should not go beyond ± 2mm.
( 4) It is strictly forbidden to operate in the state where the slurry in the swimming pool is evacuated, due to the fact that the slurry pump working in the evacuated state will certainly not only vibrate significantly, but additionally influence the life of the pump.
More information please click here.
Metal Slurry Pump
Long Teng horizontal slurry pump Application:
M, SH, HH series pumps contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, building etc. This kind of pump can be used in multi-stages.
slurry pump for sale body consist of replaceable metal or rubber lining and its impeller is made of wear resistant metal or rubber. HH series lining and impeller are made of wear resistant shaft seal of M, SH and HH series pump may adopt packing seal or centrifugal outlet can be spaced by 45。and installed by rotating eight different angles as per requirement.
slurry pump manufacturers SELECTION:
Selection As Per Performance Curve
@ M, SH series
High concentration, High corrosion slurry, Capacity: 40~80%
Medium concentration, Medium corrosion slurry, Capacity: 40~100%
Low concentration, Low corrosion slurry, Capacity: 40~120%
@ HH Series
Medium concentration, Medium corrosion slurry, Capacity: 40~80%
Low concentration, Low corrosion slurry, Capacity: 40~100%
(Maximum efficiency point Capacity is 100% under certain rotation speed.)
Learn more information about our pump,you can visit our website
Rubber Lined Slurry Pump
SH(R)series pumps contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy mine coal power building etc. This kind of rubber lined pumps manufacturer can be used in multi stages. SH(R) pump body consist of replaceable rubber lining and its impeller is made of wear resistant rubber. The shaft seal of SH(R) series pump may adopt packing seal or centrifugal seal.
SH(R)series Long Teng industrial pumps contain cantilever and horizontal centrifugal pumps, which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, building etc. This kind of pump can be used in multi stages.
SH(R) pump body consist of replaceable rubber lining and its impeller is made of wear resistant rubber.
The shaft seal of SH(R) series high pressure slurry pump may adopt packing seal or centrifugal seal.
We can offer China Slurry Pump, Slurry Pump Parts, Sand Dredging Pump, Learn more information about our pump, via
Submersible Pump
SP、SPR pumps are vertical centrifugal submersible slurry pumps that is in liquid to handle abrasive large particle and high concentration slurries. centrifugal slurry pump for sale can operate normally without shaft gland and shaft gland water even lack of intake. SP pump body is made from antifriction metalthe impeller is made from antifriction metal or rubber and polyurethane. Submerged parts of the SPR pump coated rubber for transportation corrosive slurry.
Long Teng submersible mud pump Applications
The SPR and SP designs, manufactured in popular metric sizes, provide a simple, yet rugged range of sump pumps specially developed for:
Abrasive and/or corrosive slurries
Large particle size
High slurry densities
Continuous or “snore” operations
Heavy duties demanding cantilevered shafts
Design Features
Bearing Assembly -
The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly of rubber lined pumps manufacturer is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly -
Completely fabricated from mild steel. The SPR model is
elastomer covered.
Casing -
Has a simple bolt-on attachment to the base of the column. It is manufactured
from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Impeller -
Double suction impellers (top and bottom entry) induce low axial bearing
loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Upper Strainer -
Drop-in metal mesh; snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
Lower Strainer -
Bolted metal or polyurethane for SP; moulded snap-on elastomer
for SPR.
Discharge Pipe -
Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.
Submerged Bearings -
None
Agitation -
An external agitator spray connection arrangement can be fitted to the
rubber lined centrifugal pumps as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials -
Pumps can be manufactured in abrasive and corrosive resistant materials.
Learn more information about our pump,you can visit our website
WQ Series Submersible Sewage Pumps
WQS series of deephigh-lift submersible sewage pump is used in Yangtze River Three Gorges Development processfull use of advanced CFD and flow field diagnostics and make a lot of experimental researchdesign and structure of the components in the hydraulic design of a conventional submersible sewage pump break through the traditional design success of the product to fill a high head sewage pump deep dive blankat advanced international levelalso the hydraulic horizontal centrifugal pump industry in China designed to enhance a new level.
self priming centrifugal pump manufacturer Use and model:
Deep type high lift submersible sewage pump with high head, wear resistant,high reliability, no congestion, automatic installation,automatic control, and can lift all the advantages of working in the high head, large subduction depth, water level changes large amplitude, the carriage with some abrasive media aspects of solid particles with unique features.
Long Teng vertical slurry pump Conditions of Use
maximum media temperature is +40℃
value is 5 to 9
Deep type high lift horizontal centrifugal slurry pump model shows some examples:
WQS190-80-115(example)
Deep type high lift submersible sewage pump
190 m3/h Rated flow m3/H
80 m Rated lift m
115 KW Motor power KW
50-500m3/h, 40-110m,380V,50HZ.
The series of centrifugal pumps for sale flow rate range of 50-500m3/h,head range of 40-110m power less than 115KW,Rated voltage of 380V,frequency 50HZ.
Perferred Use:
Deep type high lift pump submersible sewage pump coaxial,compact wet system uses automatic coupling and installation of high accuracy of the system can be easily installed within 100 meters high and upgrade pump,no installation or maintenance staff to enter pools,fast and convenient and safe!The system uses a special base,fixed to the bottom of the pool,connected with a specific bracket,along the rail down position to reach the export base through the pump weight,automatic coupling seals, more information please click here.
ZJL Pump
ZJL pump is a single-stage single-suction vertical type centrifugal slurry pump wholesale. The ZJL series pumps use international advanced solid-liquid two-phase flow theory and are designed using the Minimum-Wear Principle. Geometry of flow passage components accords with flow state of medium and reduces hydraulic loss partially in vortex impact or along the way reducing the wear of flow passage components improving hydraulic efficiency and reducing running noise and vibration; the series of flow passage components are made of high hard alloy cast iron which has high antiwear property corrosion resistance and impact resistance improving the service life.
ZJL slurry pumps manufacturer doesn't need any shaft seal and seal water when it generally immerses the pool or pit to work, and. The series of submerged pump with lengthening shaft is suitable for working condition with deep liquid level. The series of power Slurry Pump is suitable for conveying abrasive and corrosive slurry with solid particles in mining, metallurgy, power, coal, chemical industry, building materials and other industries, and maximum weight concentration of solid-liquid mixture is: Mortar 45%, ore pulp 60%.
Pump Parts
100% Interchangeable with AH(R) HH G Long Teng Slurry Pumps.
Both metal or rubber slurry pump parts are available
High chrome white iron with different
Cr content or rubbers for different applications.
AH: ~20/18
HH: ~6/4
slurry pump spare parts M/L: 200mm~50mm
G: 6/4 ~14/12
SP:
All OEM no. or symbols are only for reference
For more information,please don't hesitate to contact us now!