Siti halimah

Company Product

  • 2021 BMC ROADMACHINE 01 FRAMESET
  • ROADMACHINE 01 FRAMESET SPECIFICATIONS

    • Bottom Bracket Type PF86 Required
    • Frame Material TCC 01 Premium Carbon, Angle Compliance Technology
    • Fork Roadmachine 01 Premium Carbon, Integrated Cockpit
    • Headset Integrated
    • Seatpost Roadmachine 01 "D" Premium Carbon, 15mm offset
    • Front Derailleur Type Braze-On Required
    • Stem BMC ICS 01 - Integrated Cockpit Design

    ROADMACHINE 01 FRAMESET INFORMATION

    With the new Roadmachine 01, BMC is redefining what an endurance bike can be. It’s faster than a typical endurance bike, faster than BMC’s own Granfondo, something you see in stiffness and aerodynamics. At the same time, it offers greater comfort than a racing bike. The bike is only offered with disc brakes, making it easy to fit 30mm tires for off-roading. And the geometry reflects the desires of the engineers. It’s racy but stable, and the front end is adaptable, even with the integrated stem. They think of this as the one-bike collection.

    The stem is not only a looker, but shows how thoroughly BMC rethought the front end. The brake hoses run through the stem and into the frame without seeing daylight. The front brake  hose comes out of the fork leg just above the flat mount. The rear hose goes into the downtube and out on the left chainstay. Hydraulic brakes only. If you’re running Shimano Di2, the wire runs internally and the battery in the seatpost. If you’re running mechanical shifting or hydraulic, the cabling goes around the head tube. Different covers are provided.

    And the stem sits atop what BMC is referring to as a cone. The standard has 2cm of stack and gives you a stack equivalent to their GF bikes. There’s a second low-stack cone, purchase separately, that has zero cm of rise. An extra 10mm spacer comes with the bike and stem, but any 1 1/8” round spacer will work. Stem lengths are 90mm for the 47 & 51, 100mm for the 54, 110mm for the 56, 120mm for the 58 and 61. The stem clamps to a standard round diameter handlebar. And BMC is working on integrated mounts for computers and cameras.

    As with any endurance bike, comfort and stiffness need to be baked in. Both layup and shaping play important roles. That’s why there’s the beefy 1 1/2” lower end of the tapered steerer and beefy fork crown atop slim fork legs. Likewise, at the back, the angle compliance seat stays attach low on the seat tube. The shaping here results in vertical compliance that is greater than the Teammachine but less than the Gran Fondo. The D-shaped seatpost,  designed specifically for the Roadmachine, is carbon, and engineered for compliance as well. 15mm setback, btw.

    In terms of both bottom bracket stiffness and head tube stiffness, the Roadmachine sits between both bikes as well, stiffer than the GF and not as stiff as the Teammachine. You can see the work with the elongated head tube, the notch for the fork, and the massive bottom bracket juncture as well as chainstays that start off beefy and slim down, similar to the design of the fork blades. The BB standard is PF86, and atop it sits an integrated chain guide, designed to eliminate dropped chain.

    The geometry furthers the cause of a super-fast endurance bike. The chainstays are shorter than you’ll find on the GF. With the wheel better tucked underneath you, accelerations are easier. There’s 63mm of trail, a bit longer than a racing bike, but helps with stability. The bottom bracket drop is a generous 71mm, meaning you’ve got a low center of gravity, which makes both slow grinding climbs, and speedy descents easier.

    And with disc brakes, they’ve opened up tire selection. Up to 30mm in diameter will fit. As mentioned earlier, the frame is designed for hydraulic brakes only. You can run 160 or 140mm in front thanks to BMC’s proprietary mount. With the rear, you can mount a 140mm via direct mount and 160mm with flatmount adapter. The hubs roll on 12mm thru-axles, both front (100mm) and rear (142mm). The thru-axle design improves stiffness, drops weight, and makes wheel changes easier.

    The Roadmachine 01 is high-speed fun for those who want a fleet of one.

  • Send Inquiry
  • 2021 BMC TIMEMACHINE 01 TRI ROAD FRAMESET
  • BMC’s timemachine is such a fast performer, BMC needed four years to find a way to improve it. The new timemachine 01 is faster with no wind, faster in crosswinds, and easier to fit. In addition, if you need to carry stuff on the bike, there’s more room for it with less aerodynamic penalty. And the frame is UCI-legal across their size run.

    The old timemachine had impressive straight line aerodynamics. The new timemachine improves on straight line aerodynamics, real world aerodynamics, and crosswind aerodynamics. The subA tube shapes have been further refined. Many profiles have been truncated, which doesn’t cost you at all in a headwind, better shrouds water bottles and gear, and is less susceptible to side-forces when riding in crosswinds. Added stability means you spend less time fighting your bike and more time laying out the watts. Shrouding water bottles is no small deal, as you need to carry water, and most wind tunnel tests do not account for this. With cage mounts on the seat tube and three bolts on the downtube, you can choose how you want your hydration. The downtube yields two positions for bottles, the lower is more aero, but if you have trouble reaching low, or want to run two bottles, use the upper position. The tube shaping makes the most dramatic improvements with round bottles, but aero bottles benefit as well.

    In addition, the integrated bar/stem combo is faster. They actually have two different combinations sitting atop the improved bayonet fork. A raised V-cockpit that comes standard with complete bikes and is better for less flexible riders. And a flat-cockpit, that can come on the frameset, or can be ordered separately for the complete bikes. With the V, the stack spacers have a range of 590-705mm in height. With the flat, the range is 530-670mm. And with the flat setup, the base bar can be flipped over, giving you a range of 40mm below the stem to 40mm above the stem.

    In both cases, particularly in the raised cockpit setup, the arm supports channel air more cleanly, reducing drag. And there are a set of top tube mounts midway back on the top tube for boxes. This might look unusual, but it worked out to be faster in the wind tunnel, so BMC departed from tradition to give you speed.

    The fork itself has widely-spaced legs, giving the air an easier time flowing past the legs and wide rims. Both the fork and rear triangle can work with rims up to 28mm wide and tires up to 27mm wide. And the horizontal rear dropouts have adjustable stops, so you can position the wheel as close to the frame as possible regardless of the tire width.

    The final aero touch is the rear storage box. This is not UCI-legal, but it is for multi-sport riders. It’s big enough to fit a tubular plus tools and inflator. The box mounts behind the seat post when the forward mounting option is employed.

    To offer the most fit options in their P2P, Position 2 Perform, system, the seat post has a rearward mount and a forward mount. In addition, the saddle clamp  has four positions. This yields a huge range of adjustment, going from a virtual to a virtual seat angle, with 124mm of total fore-aft adjustment.

    To get the maximum speed out of a frame, integration is essential. That’s why the fork has integrated brakes, and the rear brakes hide under the chain stays. But BMC wasn’t satisfied with their earlier efforts on this front. They developed a brake booster system, giving you more power at your fingertips for less effort. They also developed something they call the quick-pad cartridge system. This makes it easy for you to swap pads from your carbon-specific race pads to your aluminum training wheel pads. Pulling and replacing cartridges is as easy as swapping pads on conventional brakes.

    BMC embraces options. They have Dual Transmission Integration here. You can run electronic or mechanical, even hydraulic shifting. However, the complexity of running mechanical is such that they only offer complete bikes with electronic shifting and recommend it when you’re building up your own steed. Likewise, they utilize the BB86 bottom bracket standard.

    The BMC timemachine 01 makes it easier to go faster, both for how it allows you to find the perfect position and for how it slices through the air outside.

  • Send Inquiry
  • 2021 Specialized S-Works Diverge Frameset Road
  • Technical Specifications

    FRAME
    S-Works Diverge FACT 11r carbon, SWAT™ Door integration, Future Shock suspension, threaded BB, internal routing, 12x142mm thru-axle, flat-mount disc
    FORK
    Future Shock w/ Damper, Smooth Boot, FACT carbon, 12x100 mm thru-axle, flat-mount
    SEAT BINDER
    Alloy,
    SEATPOST
    Roval Terra Carbon Seat Post, 20mm Offset
    SWAT
    Integrated SWAT door, internal storage system

  • Send Inquiry
  • 2021 Specialized S-Works Roubaix Frameset Road
  • Technical Specifications

    FRAME
    FACT 11R, Rider First Engineered™ (RFE), FreeFoil Shape Library tubes, threaded BB, 12x142mm thru-axle, flat-mount disc
    FORK
    Future Shock w/ Smooth Boot, 12x100mm thru-axle, flat-mount disc
    SEATPOST
    S-Works Pave
    SEAT BINDER
    Hidden drop clamp
  • Send Inquiry
  • 2021 Specialized S-Works Shiv TT Disc Module Frame Road
  • Technical Specifications

    FRAME
    S-Works FACT 11r carbon, Win Tunnel Engineered, UCI Legal, internal electric only cable routing, BSA Threaded, 12x142mm thru-axle, flat-mount disc
    FORK
    S-Works FACT carbon, UCI Legal, 100x12mm thru-axle, flat-mount disc
    HANDLEBARS
    Specialized Shiv TT Integrated bar/stem aerobar
    SEATPOST
    2019 S-Works Venge aero seatpost, FACT carbon, Di2-compatible

  • Send Inquiry