STRONG ELECTRONICS&TECHNOLOGY LIMITED

STRONG ELECTRONICS&TECHNOLOGY LIMITED

Company Product

  • StrongFirst SAW Filter & Duplexer For Mobile Phone & GPS
  • StrongFirst SAW Filter & Duplexer For Mobile Phone & GPS

    StrongFirst SAW Filter & Duplexer For Mobile Phone & GPS

    As a result of the particularity of inner structure of SAW products, it easy to be breakdown by electrostatic, so we should pay attention to ESD protect in the test.

    1. The static voltage between the signal load and the ground may cause device deterioration and damage. Please avoid electrostatic voltage.
    2. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning.
    3. Only leads of component may be soldered. Please avoid soldering another part of component.

    There is a close relationship between the device's performance and matching network. The specifications of this device are based on the test circuit shown above. L and C values may change depending on board layout. Values shown are intended as a guide only.

    StrongFirst SAW Filter for GPS & Mobile Phone is one of our main product. There is a close relationship between the device's performance and matching network, you can contact us to help you solve any problems.

     

    Part Number System

    S

    S

    F

    1950

    W01

    S2520

    1

    2

    3

    4

    5

    6

    1

    STRONG Brand Marking

    2

    SAW

    3

    F:FILTER;B:Both FiltersD:Duplexer;X:Diplexed DualFilter

    4

    CENTER FREQUENCY

    5

    SERIAL NUMBER

    6

    PACKAGE

    Strong Electronics & Technology Limited is a Hi-tech company specialized in development, production and sales of SAW Devices, Crystal Devices, LTCC series, Dielectric Devices, Ceramic Devices and IC in China.

     

    The main products are widely applied in Smart Auto; Video game; iOT; Remote control & Car Alarm; Computer; Server; Smart TV; Smart phone; Smart wearable device; Tablet Pcs; AR / VR; Mobile Telecom; Cable networking; Radar & RF Device;Satellite communication navigation and GPS; Aerospace & Defence application etc.

  • Send Inquiry
  • Dielectric Resonator StrongFirst
  • Dielectric Resonator StrongFirst

    Dielectric Resonator StrongFirst

     

    Dielectric Resonator components include three different modes, such as TEM mode, TE mode, and TM mode. They are not only have advantageous of high Q value, serialization of temperature coefficient, and serialization of dielectric constant; but also, with design flexibility for customization. Because of these advantages, dielectric resonator elements are commonly designed for LNB, Doppler response, base stations, and Repeaters....

    StrongFirst Dielectric Resonator Reduces the size of microwave devices. Low loss and high dielectric constant.

    1. High purity, high density ceramics minimize wastage.

     

    1. High dielectric constant makes possible the miniaturization of microwave circuits. Temperature-compensated dielectric constant enables stable microwave oscillators.

     

    1. The high purity and smooth surface of the ceramics make them ideal for MIC applications.

     

    1. Various shapes are available to meet the needs of a custom application.
    • Satellite antenna (BS/CS Converters)

     

    • Burglar alarms

     

    • Multichannel microwave communication system
    • Radar systems

     

    • Speed guns

     

    • Mobile phone systems

     

    • CATV converters

     

    • Measuring equipment

    dielectric resonator manufacturer:StrongFirst

    The microwaves are confined inside the resonator material by the abrupt change in permittivity at the surface, and bounce back and forth between the sides. At certain frequencies, the resonant frequencies, the microwaves form standing waves in the resonator, oscillating with large amplitudes.

    PART NO. SYSTEM:Dielectric Resonator(TE01 Mode Higher Resonator)

    S

    DR

    XXXXX

    X

    XXX

    X

    X

    /XX

    XXX

    1

    2

    3

    4

    5

    6

    7

    8

    9

     

    :

    1

    STRONG Brand Marking

    2

    Dielectric Resonator

    3

    ResonantFrequency:MHZ

    4

    (Mode:Stepped): B（Step with support)C（RING)D（DISK)

    5

    Outer Diameter:mm

    6

    Relative Dielectric Constant(D F I)

    7

    Temperature Coefficient(1,2,5,10): 1.(.):1+/-1 ppm/C. 2.(.):2+/-1 ppm/C. 5.(.):5+/-1 ppm/.(.):10+/-1 ppm/C.

    8

    Support Height:mm
  • Send Inquiry
  • StrongFirst SAW Resonator
  • StrongFirst SAW Resonator

    StrongFirst SAW Resonator

     

    The surface-acoustic-wave (SAW) resonator is the surface-wave equivalent of the crystal resonator now used extensively for stable frequency sources and filters.

    a result of the particularity of inner structure of SAW products, it easy to be breakdown by electrostatic, so we should pay attention to ESD protect in the test.

    1. Static voltage between signal load and ground may cause deterioration and destruction of the component. Please avoid static voltage.

     

    1. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning.

     

    1. Only leads of component may be soldered. Please avoid soldering another part of component.

     

    There is a close relationship between the device's performance and matching network. The specifications of this device are based on the test circuit shown above. L and C values may change depending on board layout. Values shown are intended as a guide only.

     

  • Send Inquiry
  • SAW Filter For 4G / 5G Telecommunication
  • SAW Filter For 4G / 5G Telecommunication

    SAW Filter For 4G / 5G Telecommunication

    1. As a result of the particularity of inner structure of SAW products, it easy to be breakdown by electrostatic, so we should pay attention to ESD protect in the test.

     

    1. The static voltage between the signal load and the ground may cause device deterioration and damage. Please avoid electrostatic voltage.
    2. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning.

     

    1. Only leads of component may be soldered. Please avoid soldering another part of component.

     

    The performance of the device is closely related to the matching network. The specification of the device is based on the above test circuit. The values of L and C may vary depending on the veneer layout. The values shown are for reference only.

    SAW Filter for Mobile Phone StrongFirst

    PART NO. SYSTEM:

    S

    S

    F

    1950

    W01

    S2520

    1

    2

    3

    4

    5

    6

    1

    STRONG Brand Marking

    2

    SAW

    3

    F:FILTER;

    B:Both Filters

    D:Duplexer;

    X:Diplexed DualFilter

    4

    CENTER FREQUENCY

    5

    SERIAL NUMBER

    6

    PACKAGE

    More information you can click here

  • Send Inquiry
  • StrongFirst SAW Filter for Low Power System, Car Alarm, Remote control
  • StrongFirst SAW Filter for Low Power System, Car Alarm, Remote control

    StrongFirst SAW Filter for Low Power System, Car Alarm, Remote control

     

    What are SAW filters used for?

    SAW filters can be designed to provide high selectivity and low distortion for military communication & aerospace applications. They also help provide a lower cost and size compared to other filter technologies.

     

    1. As a result of the particularity of inner structure of SAW products, it easy to be breakdown by electrostatic, so we should pay attention to ESD protect in the test.

     

    1. Static voltage between signal load and ground may cause deterioration and destruction of the component. Please avoid static voltage.

     

    1. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning.

     

    1. Only leads of component may be soldered. Please avoid soldering another part of component.

    SAW Filter for Car Alarm StrongFirst

    There is a close relationship between the device's performance and matching network. The specifications of this device are based on the test circuit shown above. L and C values may change depending on board layout. Values shown are intended as a guide only.

  • Send Inquiry