SUMBER JAYA ELECTRONIC STORE

Broad range of applications
CR 30-X is a highly versatile digitizer. It offers an ideal solution for any private and decentralized CR environment. CR 30-X can handle general radiology anddental applications.
Full data
The CR 30-X makes no compromises in image quality: it reads imaging plates at the high resolution of 10 pixels/mm for all image plate sizes.
Table-top
With its table-top size, the CR 30-X digitizer can be placed easily at any location. It works with dedicated cassettes and was designed with ease of use in mind, for optimal handling, comfort and maintenance. When combined with the optionally available universal X-ray shielding, the CR 30-X can be used inside the X-ray room.
Low total cost of ownership
Installing the CR 30-X can be done in a single day. With the special LED technology in the erasure unit, no additional electricity is required, so standard electrical outlets are sufficient. No preliminary electrical work means a lower set-up cost and simpler installation. With its modular, component-based design, it offers faster, easier and more cost-effective maintenance.

NX
CR 30-X is available in combination with NX, Agfa’s image identification and quality control tool, for the most efficient and optimized radiology workflow.

Cassettes with memory
CR 30-X uses dedicated cassettes with an embedded memory that stores the data entered during identification. The built-in antenna card identifies the data by no-touch radiofrequency tagging. ID data and images are linked from the beginning throughout the entire electronic processing system.

CASSETTES SIZES: CR MD4.0T general CASSETTES :

WE SELL PRODUCT :
- Binoculars
- Camcoder
- Camera
- Coffee machine
- Medical Electronics
- Mining Equipment Bitcoin
- Print Head
- Printers
- Scopes
- Toys

1. Specifications of the Antminer D3 are as follows:
a) Hash rate: 15 GH/s (Variation of ±5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11

2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

3. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.

4. We advise you to research and prepare in advance for the customs' clearance in your country to avoid delays or unexpected costs.

5. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

6. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

WE SELL PRODUCT :
- Binoculars
- Camcoder
- Camera
- Coffee machine
- Medical Electronics
- Mining Equipment Bitcoin
- Print Head
- Printers
- Scopes
- Toys

Armasight Extended Battery Pack (for All Armasight Digital and Thermal Devices)

The Armasight Extended Battery Pack is a external battery power supply with rechargeable batteries for extended operational time for all Armasight high performance Digital and Thermal devices. It takes two 18650 (included) type rechargeable batteries or four CR123A Lithium batteries or CR123 type rechargeable batteries. Up to 8 hours of extended operational time.

DRYSTAR  5302 is a dual media size, direct medical imager

Excellent reliability, minimum maintenance
DRYSTAR 5302 offers all the benefits of Direct Digital Imaging. This solid-state technology avoids the use of complex optical components, making the imager reliable and durable by design. Moreover, DRYSTAR 5302 is ecological and user-friendly. No more wet processing, no darkroom, no complicated adjustments or cleaning procedures. Chemicals, waste handling and disposal costs are things of the past.

Two media sizes on-line
Despite its compact size, DRYSTAR 5302 features 2 media sizes  on-line,  with  5 media  sizes  available.  The  imager thus  offers  enhanced  flexibility  and convenience,  as  it  is not  necessary  to  constantly  load a  new  media  format  for different image sizes.   With   its   ultra-short   access   time for  the  first  film  and  its  throughput  of  75  sheets  per  hour (14   x   17   inch),   DRYSTAR   5302   offers   versatility   and improved workflow for almost all radiology applications.

Next-to-application imaging
The    unit’s    small    footprint  means that convenient next-to-application installation is possible in even the most  space-restricted environments.  DRYSTAR   5302’s freedom    of  placement,  combined  with  its  low  investment and    running costs,  make it the perfect match for many modalities.

A total, one-stop imaging solution
Through  its  intelligent  matching  of  Direct  Digital  Imaging technology, media    and    imager,    DRYSTAR    5302    isdesigned   to   stand   at   the   heart   of   Agfa   HealthCare’s integrated    solutions.    Combined    with    state-of-the-art DRYSTAR   DT2    media,    diagnostic    quality    greyscale hardcopies   of   the   highest  standard   are   delivered   time after    time.    Because    it    is    heat-sensitive   rather    than light-sensitive,   DT2   brings   the   added   convenience   of daylight loading

Enhancing imaging quality
As part of our continual drive to provide you with perfect image quality, our award winning Direct Digital Imaging (DDI) technology has been enhanced to include A# Sharp technology. This technology intensifies imaging capability, enabling DDI to    provide sharper image quality across all applications.

WE SELL PRODUCT :
- Binoculars
- Camcoder
- Camera
- Coffee machine
- Medical Electronics
- Mining Equipment Bitcoin
- Print Head
- Printers
- Scopes
- Toys

INNOSILICON, the world’s leading supplier of advanced mining ASIC, proudly presents its next generation X11 miner, A5 DashMaster, at 30.2GH performance in 750W low power mode (factory default) and can reach up to 38GH in overclocked mode. It is so advanced, so far ahead in the field that it possesses >3.2x mining efficiency and up to 2.6x Hash rate advantage over its closest competitor, which means overall >3x better, significantly longer life time, huge competitive advantage especially when hash rate increases rapidly, lower operating cost, and higher ROI in all conditions. Smart buyers know that the safest buy is to buy miners that last to make a profit instead of becoming obsolete. A5 DashMaster is the ultimate X11 miner to own and to resell for the years to come.

Hash Rate:     30.2GH/s(+/-8%, in 750w normal mode)
38 GH/s(+/-8%, in 1250w overclock mode)
Power Consumption:     750W ( normal mode, at the wall, with 93% efficiency PSU, 25°C temperature )
Chip Type:     A5 DashMaster ASIC
Dimensions:     Single tube, 400mm(L) x 135mm(W) x 158mm(H)
Weight:     4.8KG
Operating Temperature:     0°C—85°C (device junction temperature)
Network Connection:     Ethernet

WE SELL PRODUCT :
- Binoculars
- Camcoder
- Camera
- Coffee machine
- Medical Electronics
- Mining Equipment Bitcoin
- Print Head
- Printers
- Scopes
- Toys

DRYSTAR 5503 IS A HIGH-THROUGHPUT, HIGH-RESOLUTION, MULTIPLE MEDIA SIZE DIRECT DIGITAL IMAGER THAT CAN BE EASILY NETWORKED FOR OPTIMAL PRODUCTIVITY.

• Excellent imaging quality across all applications
• Multi-modality
• Multi-format with 3 media sizes on-line
• Diagnostic quality greyscale hardcopies of high quality
• Unique sorter function
• Mammography printing option

Multi-format and 3 media sizes on-line
DRYSTAR 5503 features multiple-format handling, with the three most popular media sizes and/or types permanently on-line. The imager is thus capable of delivering CT, MRI, DSA, digital R&F, CR and DR images at high speed onto different DRYSTAR DT2 media.The DRYSTAR 5503 comes with three input trays. Every input tray can use five different film formats, ranging from 8 x 10” to 14 x 17”, making the final image versatility of this stand-alone, small footprint unit remarkable. And what DRYSTAR 5503 gains in versatility, the user gains in convenience and time.

Sorting it out
In order to increase efficiency and user-friendliness, DRYSTAR 5503 has a unique sorter function. This supports that whichever modality is being served, whichever print command is currently being handled, all tasks will be carried out and sorted, according to modality or patient record, if available. With DRYSTAR 5503, high traffic density input no longer means bottlenecks and slow-speed output at the imager, virtually eliminating log jams.

Enhancing imaging quality
As part of our continual drive to provide you with perfect image quality, our award winning Direct Digital Imaging (DDI) technology has been enhanced to include A#Sharp technology. This technology intensifies imaging capability, enabling DDI to provide sharper image quality across all applications. Unique sorter eliminates high-traffic bottlenecks Three media trays for different on-line media sizes DRYSTAR 5503.

Integrated print solution
Through its intelligent matching of Direct Digital Imaging technology, media and imager, DRYSTAR 5503 is ideally suited to stand at the heart of an Agfa HealthCare integrated solution. Its leading-edge DRYSTAR DT2 media delivers excellent, diagnostic quality greyscale hardcopies. Because it is heat sensitive rather than light sensitive, DT2 offers the convenience of daylight loading. The dry imaging technology means no more wet processing, no darkroom, no complicated adjustments or cleaning procedure, and no chemical disposal costs. DRYSTAR DT2 media can be used in all formats: 8 x 10”, 10 x 12”, 11 x 14”, 14 x 14” and 14 x 17”.

Increasing performance for mammo
As an option, DRYSTAR 5503 can also print mammography images. Using our dedicated DT2 Mammo film provides you high image quality, in accordance with mammography standards. With its 508 dpi resolution and the A#Sharp technology, DRYSTAR 5503 produces sharp images, ideally suited for digital mammography.An automatic quality assurance tool is built in to help you with your daily quality checks. Images can be printed on 8 x 10” film, as well as on 10 x 12” film for modalities with larger detectors. As a third film size for mammography we also offer 11 x 14”. In the mammography mode, the DRYSTAR 5503 can print up to 160 8 x 10” mammo films per hour, fitting easily into an environment with several modalities, while supporting full performance for the mammography department.

 WE SELL PRODUCT :
- Binoculars
- Camcoder
- Camera
- Coffee machine
- Medical Electronics
- Mining Equipment Bitcoin
- Print Head
- Printers
- Scopes
- Toys