The 10” x hydraulic free backing brake has two coated, dacromet and galvanized, it’s 3500 lbs axle hydraulic brake uses 4 bolt mounting flanges. Because 10" free backing brake assembly lacks electrical parts, there are a pair of rivered brake shoes and stainless-steel springs, a trailer with hydraulic brake can safely be backed into water. So this 10" trailer brake perfect for boat trailers.
Features
l Using with a surge-type trailer brake actuator.
l Dacromet / Galvanized coated delivers better corrosion protection than standard finish.
l Periodic manual adjustment required.
l Mounting bolts and hardware sold separately
l This brake fits on lb axles with hydraulic drum brakes, such as Dexter, Axis, Rockwell, Atwood etc.
Specifications
Ø Dimension: 10 inch x 2 1/4 inch
Ø Axle Capability: 3500 lbs Axle (13”, 14”, 15” Wheel)
Ø Mounting Flange Bolt Pattern: 4 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 10” x 2 1/4" Riveted Free Backing Brake Shoe Kit x 1
² Dacromet / Galvanized Back Plate x 1
² Single-Servo Aluminum Wheel Cylinder x 1
² Stainless Steel Springs x 2
12” x 2” hydraulic uni-servo brakes are replacement for one – 7k lbs axle with 5 bolt pattern. The brakes are heavy duty application for 7000 lbs trailer axles. Every 12 inch hydraulic trailer brake assemblies have two pieces of non- asbestos semi metal brake shoes, bonded and riveted are available. The matched drums are 6 bolt or 8 bolt 12” brake drums. Technicians always recommend the customers to use hydraulic brake kit for tandem axles & torsion axles of boat trailers.
Features
l 12" hydraulic uni-servo brakes use with a surge-type trailer brake actuator (sold separately).
l Manual adjustment – using fine tooth brake adjustment.
l E-coated backing plates provide corrosion protection.
l Pre-assembled and easy installation.
l This trailer backing plate exchange with most standard hydraulic brakes, such as Dexter, Titan, Demco, Axletek, etc.
Specifications
Ø Dimension: 12 inch x 2 inch
Ø Axle Capability: 5200 lbs Axle / 6000 lbs Axle/ 7000 lbs Axle (, 15", 16”, Wheel)
Ø Mounting Flange Bolt Pattern: 5 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12” x 2" Bonded Uni-Servo Brake Shoe Kit x 1
² E-Coated Back Plate x 1
² Single-Servo Wheel Cylinder x 1
² Springs x 2
Trailer Galvanized Electric Brake, Boat Trailer Mobile Home Backing Plate, Hydraulic Disc Brake Caliper Supplier
√ |
Trailer Brakes |
√ |
9,000 lb. – 12,000 lb. |
√ |
Electric Backing Plate |
√ |
Trailer Brake Assembly |
√ |
Self-Adjusting |
√ |
Electric Drum Brake |
The 12 1/4" x 3 1/2" electric brakes can fit AL-KO/Hays axles, but not for Dexter axles.
Features
l x Electric Brakes fit 5 mounting flange for 9k lb. to 12k lb. trailer axles.
l Self-adjusting electric brake assembly keeps the brake adjusted automatically.
l Fully assembled, compatible with most trailer axle manufacturers.
l Fits 15" or larger wheels.
Specifications
Ø Dimension: inch x inch
Ø Axle Capability: 9000 lbs to 12000 lbs Axle
Ø Mounting Flange Bolt Pattern: 5 bolts (Mount plate has 6 holes, but normally only 5 are used)
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12 1/4” x 3 1/2" Electric Brake Shoe Set x 1
² 5 Bolt Mounting Cast Backing Plate x 1
² Magnet Lever x 1
² Magnet x 1
² Brake Adjuster x 1
² Long Spring x 1
² Short Spring x 2
Yingtu is a China supplier of boat trailer axles. We have a high-tech work shop. We have a complete quality management system. Choose our trailer brake assembly, you can be get most careful and thoughtful service!
9" mechanical trailer drum brake kit is suitable for caravans, camper trailers, boat trailers, horse floats and box trailers. The 9” mechanical brake assembly with lever brake has two identical shoes, there is no primary shoe or secondary shoe as in electrical brake assemblies. The recommended maximum load of 9” x trailer mechanical brakes for 15”-16” wheel is 1200 kg, and 1450 kg for the axles of 13” and 14” wheel. It is worth noting that the matched drums have 5 or 6 bolt patterns. Most of 9 inch trailer mechanical backing plate wholesaler in Australia and New Zealand market.
Features
l Mechanical brakes are cheaper than hydraulic brakes.
l Requires only a cable and levers. (sold separately) - no brake cylinder or hydraulic lines necessary.
l E-coated backing plates resist wear and corrosion.
l Fully Assembled; Quick and easy installation.
l The 9" mechanical drum brake exchange with most axle brands including AL-KO, Bawa, and many others.
Specifications
Ø Dimension: 9 inch x 1 3/4 inch
Ø Axle Capability: 1200 kg Axle (15”/ 16” Wheel), 1450 kg Axle (13” / 14” Wheel)
Ø Mounting Flange Bolt Pattern: 4 Bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 9” x 1 3/4" Brake Shoe Set x 1
² 9” E-Coated Back Plate x 1
² Brake Adjuster x 1
² Brake cable x 1
² Springs x 2
Our company hot selling mechanical disc brakes and electric backing plate. We have a whole set of quality management system. If you have interested in our trailer axles, please feel free to contact us.
√ |
Trailer Electric Brakes |
√ |
12,000 lb. -15,000 lb. |
√ |
Electric Backing Plate |
√ |
Forward Self Adjusting (FSA) |
√ |
Trailer Axles |
√ |
Trailer Drum Brakes |
√ |
12 1/4” x 5” Drum |
√ |
Trailer Brake Assembly |
12-1/4" x 5" forward self adjusting trailer electric brake assembly automatically adjusts for optimum braking performance. The trailer brakes have the strongest stopping power, and can fit 12,000 lbs to 15,000 lbs trailer axles. The mounting plate is 7 hole pattern.
Features
l x 5” Trailer Drum Brakes fit 12k lb. to 15k lb. trailer axles with 7 hole flanges.
l Trailer electric brake assemblies are designed for non-marine applications.
l Completely assembled and easily installation.
l The brake linings of non-asbestos, semi-metal friction material are bonded on the brake shoes.
l Electric brakes have more moving parts for replacement than hydraulic brakes, this can offer more user control and reduce the maintenance cost.
l Fits 16" or larger wheels.
Specifications
Ø Dimension: inch x 5 inch
Ø Axle Capability: 12000 lbs – 15000 lbs Heavy Duty Axle
Ø Mounting Flange Bolt Pattern: 7 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12 1/4” x 5" Electric Brake Shoe Set x 1
² 7 Bolt Mounting Cast Backing Plate x 1
² Magnet Lever x 1
² Blue Wire Magnet x 1
² Brake Adjuster x 1
² Long Spring x 1
² Short Spring x 2
Yingtu specializes in offering trailer parts to . and replacement market. We work mainly on light and heavy duty suspension components, especially Axle, Brake, Caliper and Drum. With over 10 years’ experience, our engineer team assure only the best products reach customers.
Name: Trailer Bearing Kit
Description: We have a large variety of bearings and hub accessories apply to the different axles of the RV, utility trailer, cargo trailer & boat trailer.
Yingtu is a manufacturer of Recreational Vehicles Brake CaliperWe have a high-tech work shop. We have a complete quality management system. Choose us, you can be get most careful and thoughtful service! More information please view here.
Name: Trailer Stub Axle Spindle with Brake Flange
Description: The spindles are for boat trailer axles, it is mounting a disc brake by 2 bolts. We are a professional company to supply trailer parts and accessories. Our main products are trailer axles, trailer drum brakes, trailer disc brakes and trailer drums & hubs.
√ |
Trailer Double Axle |
√ |
Trailer Dual Axles |
√ |
Trailer Tandem Axle |
√ |
Tandem Axle Trailers |
√ |
Leaf Spring Axles |
√ |
Trailer Axles and Parts |
√ |
Heavy Duty Trailers |
√ |
Heavy Duty Axles |
Trailer tandem axle has two sets of single axles placed in close proximity to each other to help disperse the weight load of the cargo. The extra axle allows the trailer to handle more weight and to be more stable at higher speeds and highway conditions. Although tandem axle costs more money than single axle, the extra upfront cost may be worth it in the long run.
Features
l More safety and more stable on a long distance towing or at highway speeds.
l Level towing is a must for a tandem axle trailer.
l Axles come fully assembled, can compatible with most trailer manufacturers’ axles.
l The leaf spring kit is sold separately.
l The blown tyre could possibly be changed without using a jack.
√ |
Trailer Suspension |
√ |
Independent Trailer Suspension |
√ |
Independent Trailer Axle |
√ |
Off-Road Trailer Axle |
√ |
Off-Road Trailer Suspension |
√ |
Trailer Axles |
√ |
Trailer Independent Suspension |
√ |
Independent Suspension System |
Independent suspension system allows each wheel on the trailer to move vertically, reacting to a bump on the road independent of the other wheels. In this system there is no transfer of impacts from one side of the trailer to the other, the wheels remain vertical throughout their travel and there is a greater range of movement available. This type of suspension system offers many advantages over other suspension systems such as increasing the serviceability of the system in the event of a breakdown. For those traveling offroad the lack of a cross-vehicle axle beam can also provide ground clearance advantages.
√ |
Mobile Home Axle (MHA) |
√ |
For 4500 LB - 6000 LB Axle |
√ |
12” Drum Brake |
√ |
One Time Use |
√ |
Dexter Type |
√ |
Electric Brake Assembly |
Features
l The 12” Electric Brake Assemblies are specialized for Mobile Home Axles.
l Dexter Axle Co., develop mobile home axles in order to reduce the cost of suspension system.
l This system was not approved by DOT, but approved by HUD (Housing and Urban Development).
l Assembly comes complete with magnet, arm, and weld on backing plate.
l Mobile home electric brake assembly is welded onto the beam and not intended to be field replaced.
Specifications
Ø Dimension: 12 inch x 2 inch
Ø Axle Capability: 4500 lbs to 6000 lbs Axle
Ø Installation Method: Weld On
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12” x 2" Electric Brake Shoe Set x 1
² Weld On Back Plate x 1
² Round Magnet with Spring x 1
² Magnet Arm x 1
² Brake Adjuster x 1
² Long Spring x 2
² Short spring x 1
√ |
Trailer Backing Plate |
√ |
Electric Drum Brake |
√ |
With Parking Brake |
√ |
Trailer Brake Assembly |
√ |
Off Road Electric Brakes |
√ |
With Handbrake |
√ |
1400 KG – 1600 KG Axle |
√ |
10” Brake Drum |
10" x 2 1/4" offroad trailer electric brake assembly with handbrake is specifically designed for extreme rugged conditions in Australia. The 10” electric backing plate mounts on standard 4 bolt flange, and it is used to work with slimline and parallel 10” brake drums. The obvious difference between off road electric brakes and electric brakes with handbrake is the magnet, off road magnet has a high-tech plastic core and that will reduce vibration, wear and high temperature damage, in order to prolong the life of electric brakes.
Features
l 10” x 2 1/4” Trailer Drum Brakes are recommend replacing AL-KO off road electric brakes to the caravans, campers or trailers.
l E-coated backing plates resist wear and corrosion.
l Periodic manual adjustment required.
l Fully assembled and easily installation, mostly used for Australian offroad trailers.
l Electric backing plates are an extremely efficient and reliable braking system that require minimum maintenance.
l Needs only an electric brake controller to work.
l High grade brake linings provide smooth efficient braking.
Specifications
Ø Dimension: 10 inch x inch
Ø Axle Capability: 1400 kg (13”-14” wheel) to 1600 kg (15”-16” wheel) Axle
Ø Mounting Flange Bolt Pattern: 4 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 10” x 2 1/4” Electric Brake Shoe Set x 1
² E-coat Backing Plate x 1
² Magnet Lever x 1
² Green Wire Offroad Magnet x 1
² Brake Adjuster x 1
² Long Spring x 1
² Short Spring x 1
√ |
Trailer Brake Drum Kit |
√ |
10 x 2 1/4 inch Drum |
√ |
Galvanized Trailer Brakes |
√ |
3500 lbs, |
√ |
10" Hydraulic Brakes |
√ |
Uni-Servo |
√ |
Boat Trailer Brakes |
√ |
Dacromet Hydraulic Drum Brakes |
This 10" hydraulic uni-servo brake contains one set of riveted dacromet brake shoes, dacromet backing plate, stainless steel springs and an aluminum wheel cylinder. This trailer brake assembly is built to the highest standards of the RV industry and will last a long time. Our 10 inch trailer brake has 4 holes with most major brands of axles, without modifying the axle or mounting flange. Hot dip galvanized is available.
Features
l Using with a surge-type trailer brake actuator.
l Dacromet / Galvanized coated offers the best value of protection for salt water applications.
l Fine-tooth brake adjustment gears allow for a more precise setting
l Periodic manual adjustment required.
l This brakes exchange with most quality hydraulic brakes, such as Dexter, Demco, Hayes, Titian, Atwood etc.
Specifications
Ø Dimension: 10 inch x 2 1/4 inch
Ø Axle Capability: 3500 lbs Axle (13”, 14”, 15” Wheel)
Ø Mounting Flange Bolt Pattern: 4 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 10” x 2 1/4" Riveted Uni-Servo Brake Shoe Kit x 1
² Dacromet / Galvanized Back Plate x 1
² Single-Servo Aluminum Wheel Cylinder x 1
² Stainless Steel Springs x 2
√ |
Forward Self Adjusting (FSA) |
√ |
9,000 lb. – 10,000 lb. |
√ |
Trailer Backing Plate |
√ |
Trailer Axles |
√ |
Electric Brakes |
√ |
Electric Brake Assembly |
Features
l This electric brake assemblies fit standard 7 bolt mounting flange for 9k lb. to 10k lb. trailer axles.
l Forward Self Adjusting (FSA) electric brake assembly keeps the brakes adjusted automatically.
l Compatible with most trailer axle manufacturers.
l E-coated backing plates resist wear and corrosion
l Fits 15" or larger wheels.
Specifications
Ø Dimension: inch x inch
Ø Axle Capability: 9000 lbs to 10000 lbs Axle
Ø Mounting Flange Bolt Pattern: 7 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12 1/4” x 3 3/8" Electric Brake Shoe Set x 1
² 7 Bolt Mounting Cast Backing Plate x 1
² Magnet Lever x 1
² Yellow Wire Magnet x 1
² Brake Adjuster x 1
² Long Spring x 1
² Short Spring x 2
√ |
Electric Backing Plate |
√ |
Trailer Axles |
√ |
Trailer Electric Brakes |
√ |
For 2500 kg Axle |
√ |
Electric Brake Assembly |
√ |
15” – 16” Wheel |
√ |
12 Inch Drum |
√ |
Trailer Brake System |
This 12” x 2” electric brake assembly with handbrake is designed for the trailers, caravans and campers in Australia market, it is operated by a trailer controller and they can provide an ability for the driver to apply the trailer brakes manually. It is used for 15”-16” wheel, and the axle capacity is 2500 kg.
Features
l 12” x 2” electric brakes with hand/parking brake are very popular in Australia.
l E-coated backing plates resist wear and corrosion.
l Trailer electric brake assembly with parking brake is more independent and more reliable than the without parking brake version in some circumstances.
l This 12 inch electric brake magnet is different from 12” off road electric brake.
l Includes brake shoes, magnet, mechanical parking brake lever and backing plate, ready for installation.
l High grade brake linings provide smooth efficient braking.
Specifications
Ø Dimension: 12 inch x 2 inch
Ø Axle Capability: 2500 kg (15”-16” wheel) Axle
Ø Mounting Flange Bolt Pattern: 5 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12” x 2” Electric Brake Shoe Set x 1
² E-coat Backing Plate x 1
² Magnet Lever x 1
² Black Wire Magnet x 1
² Brake Adjuster x 1
² Long Spring x 1
² Short Spring x 1
√ |
RVH |
√ |
10 x inch drum |
√ |
With Handbrake |
√ |
Electric Brake Assembly with Parking |
√ |
utility trailer axle kits |
√ |
trailer axle repair |
√ |
3500 lb trailer axle |
√ |
trailer axle parts |
Parking brake also known as hand brake or e-brake (emergency brake). 10 inch electric drum brakes will become much safer with handbrake for light duty trailers, especially box trailers, caravan and flat trailers etc. Meanwhile trailer brake kit with handbrake will make the trailer braking system stronger. RVH is very hot in Australia for Recreation Vehicles. Enjoy a better holiday.
Features
l 3500 trailer axle equipped with RVH will offer you a better trip.
l 10 inch trailer brake is easy to install and control.
l Needs only an electric brake controller to work.
l No need actuator or hydraulic lines.
l Backing plates and the lever are E-coated to resist corrosion.
l Periodic manual adjustment required.
l World class brake linings provide smooth efficient braking .
l Exchange with most trailer axle 3500 lb, including Dexter, AL-KO, Hayes, and many others.
Specifications
Ø Dimension: 10 inch x 2 1/4 inch
Ø Axle Capability: 3500 lbs Axle
Ø Mounting Flange Bolt Pattern: 4 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
Ø 10” x 2 1/4" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø Oval Magnet with Green Wire x 1
Ø Lever Arm x 1
Ø Long Springs x 1
Ø Adjuster x 1
√ |
Hydraulic Drum Brake Assembly |
√ |
12 x 2 inch Drum |
√ |
Trailer Hydraulic Brakes |
√ |
5200 lb, 6000 lb, 7000 lb |
√ |
Hydraulic Backing Plate |
√ |
Uni-Servo |
√ |
12" Trailer Brake Assembly |
√ |
Manual Adjustment |
The 12 inch trailer hydraulic brakes fit 14 1/2” to 16 ½” wheels. The mounting flange is 5-bolt pattern. This 12 inch trailer brake has marine -grade (galvanized or dacromet coated) steel, it offers superior corrosion resistance. Trailer hydraulic uni-servo brake wholesaler recommend these to customers who want to replace the boat trailer brakes of lbs, 6k lbs or 7k lbs axle.
Features
l Designed for use with surge-type trailer brake actuators.
l Dacromet / Galvanized coated offers the best value of protection for salt water applications.
l Uni-Servo brakes have 15 - 20 percent braking in reverse.
l Periodic manual adjustment required.
l This brakes exchange with most quality hydraulic brakes, such as Dexter, Demco, Hayes, etrailer, LCL etc.
Specifications
Ø Dimension: 12 inch x 2 inch
Ø Axle Capability: 5200 lbs, 6000 lbs, 7000 lbs Axle (", 15", 16" and "Wheel)
Ø Mounting Flange Bolt Pattern: 5 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12” x 2" Riveted Uni-Servo Brake Shoe Kit x 1
² Dacromet / Galvanized Back Plate x 1
² Single-Servo Aluminum Wheel Cylinder x 1
² Stainless Steel Springs x 2
√ |
Trailer Brake Assemblies |
√ |
12 x 2 inch Drum |
√ |
Hydraulic Trailer Backing Plate |
√ |
5200 lb, 6000 lb, 7000 lb |
√ |
Hydraulic Brake Assemblies |
√ |
Free Backing |
√ |
12" Trailer Drum Brakes |
√ |
Manual Adjustment |
The shoe dimensions on 12 inch hydraulic drum brakes are 12” x 2” and mount to the trailer's 5 hole standard brake flange for both 6 lug and 8 lug brake drum hubs. All 6000 lbs axle trailer brakes work with 6 lug 12” brake drum hubs. These free backing hydraulic brakes are ideal for use on a boat or snowmobile trailer. Full range of serviceable backing plate spare parts are available for 12" hydraulic free backing brakes. There are various types of back plates such as silver spray, dacromet and galvanized available for customers selection.
Features
l Designed for use with surge-type trailer brake actuators.
l Dacromet or Galvanized coated are durable enough for saltwater applications.
l Complete assembly readily available for 5-bolt flange mounting.
l Periodic manual adjustment required.
l No mounting bolts or nuts included.
l Free-backing design lets you reverse without trailer brakes being activated
l This brakes exchange with most name brand hydraulic brakes, such as Dexter, Lippert (LCI), and AL-KO etc.
Specifications
Ø Dimension: 12 inch x 2 inch
Ø Axle Capability: 5200 lbs, 6000 lbs, 7000 lbs Axle (", 15", 16" and "Wheel)
Ø Mounting Flange Bolt Pattern: 5 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12” x 2" Riveted Free Backing Brake Shoe Kit x 1
² Silver spray, Dacromet or Galvanized Back Plate x 1
² Single-Servo Aluminum Wheel Cylinder x 1
² Stainless Steel Springs x 2
Name: Trailer Spring Leaf
Description: We have a large variety of spring leaves apply to the trailer axles. The most popular choices of the trailer leaf springs are semi-trailer springs and double eye springs.
√ |
Heavy Duty Trailers |
√ |
Trailer Tri Axle |
√ |
Trailer Triple Axle |
√ |
Tripe Axle Trailer |
√ |
Leaf Spring Axles |
√ |
Trailer Axles and Parts |
√ |
HD Triple Axle |
√ |
Heavy Duty Axles |
Trailer triple axle has three sets of single axles placed in close proximity to each other to help disperse the weight load of the cargo. The extra axles allow the trailer to handle more weight and to be more stable at higher speeds and highway conditions. Although triple axle costs more money than single and tandem axle, the extra upfront cost may be worth it in the long run.
Features
l More safety and more stable on a long distance towing or at highway speeds.
l Axles come fully assembled, can compatible with most trailer manufacturers’ axles.
l The leaf spring kit is sold separately.
l The blown tyre could possibly be changed without using a jack.
l Tri axle trailers are popular in the construction industry.