7" x 1-1/4" Trailer Electric Brake Assembly
Name: 7" x 1-1/4" Trailer Electric Brake Assembly
Capacity: For 2,000 lbs. Axle
Trailer Galvanized Electric Brake Part No.: EN07B
Description: 7 inch x inch trailer electric backing plate is electrophoretic-coated.
7" x 1 1/4" Trailer Brake Assembly are usually installed to torsion axles with max capacity of lbs . These brakes are mostly for light trailers which axles do not need leaf springs.
Features
7 inch electric brakes are easy to install and control.
Needs only an electric brake controller to work.
E-coated backing plates resist corrosion.
Periodic manual adjustment required.
Brake mounting bolts are included.
Exchange with most trailer axles not over 2200 lbs, including Dexter, AL-KO and many others.
Specifications Electric Brake Assembly
Dimension: 7 inch x 1 1/4 inch
Axle Capability: 2200 lbs Axle
Mounting Flange Bolt Pattern: 4 bolts
Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Trailer Galvanized Electric Brake Product Composition
7” x 1 1/4" Brake Shoe Set x 1
E-coat Backing Plate x 1
Round Magnet with White Wire x 1
Magnet Lever x 1
Returning Springs x 1
Adjuster x 1
Yingtu specializes in offering trailer parts to . and replacement market. We work mainly on light and heavy duty suspension components, especially Axles, Brakes, Calipers and Drums. Sales team always responds customers with patience and passion. More information please view here.
10" x 2-1/4" Trailer Electric Brake Assembly
Name: 10" x 2-1/4" Trailer Electric Brake Assembly
Capacity: For 3,500 Axle
Part No.: EN10B
Trailer Galvanized Electric Brake Description: 10 inch x inch trailer electric backing plate is electrophoretic-coated.
10'' electric brakes are usually work with the same size brake drum for lbs trailer axles. Our factories produce these products in huge quantity and sold million pcs per year.
Features
10 inch electric brakes are easy to install and control.
Needs only an electric brake controller to work.
No need actuator or hydraulic lines.
E-coated backing plates resist corrosion.
Periodic manual adjustment required.
Brake mounting bolts are included.
Electric brake assembly can exchange with most trailer axle 3500 lb, including Dexter, AL-KO, Hayes, and many others.
Specifications
Dimension: 10 inch x 2 1/4 inch
Axle Capability: 3500 lbs Axle
Mounting Flange Bolt Pattern: 4 bolts
Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition Trailer Galvanized Electric Brake
Ø 10” x 2 1/4" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø Green Wire Magnet x 1
Ø Magnet Lever x 1
Ø Springs x 2
Ø Adjuster x 1
Our company hot selling hydraulic disc brakes and electric backing plate. We have a whole set of quality management system. If you have interested in our trailer axles, please feel free to contact us
|
√ |
off road trailer axle |
√ |
Manual Adjustment |
|
√ |
With parking |
√ |
trailer brake kit |
|
√ |
12 inch electric brake |
√ |
trailer electric brake system |
|
√ |
6000 lbs trailer axle |
√ |
trailer brake kits |
ATM (Aggregate Trailer Mass)
GTM (Gross Trailer Mass)
In Australia, all trailers with ATM or GTM over 2000kg must have a Breakaway Brake setup that will immediately apply the trailer brakes in the event of the trailer becoming disconnected from the towing vehicle. Off-road electric drum brake is both with mechanical parking and with off road design. The plastic core in the magnet will reduce the vibration and the high temperature so that this brake assembly could ensure you a safe drive when you facing the extremely rough road. Meanwhile the trailer axle repair will be easy.
Features
l Electric off road brakes assembly will work with or without brake actuator.
l 12 inch x 2 inch trailer off road electric backing plate is electrophoretic-coated.
l Needs only an electric brake controller to work.
l Periodic manual adjustment required.
l 12 inch trailer brake can work with most trailer axles 6000 lbs including Dexter, Hayes and many others. With the off road design, trailers can go through the rough road freely.
Specifications
Ø Dimension: 12 inch x 2inch
Ø Axle Capability: 6000 lbs Axle
Ø Mounting Flange Bolt Pattern: 5 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
Ø 12” x 2" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø Off-Road Magnet x 1
Ø Magnet Lever x 1
Ø Handbrake x 1
Ø Springs x 2
Ø Adjuster x 1
Ø Mechanical park brake lever
Our company wholesale boat trailer Brake Assembly, we have a whole set of quality management system. If you have interested in our boat trailer brakes, please feel free to contact us. More information please view here.
12" x 2" Trailer Electric Brake Assembly
Name: 12" x 2" Trailer Electric Brake Assembly
Trailer Galvanized Electric Brake Capacity: For 5,200 -7,000 Axle
Part No.: EN12B
Description: 12 inch x 2 inch trailer electric backing plate is electrophoretic-coated.
12" drum brake assemblies are usually work with the same size brake drum for 6k lbs trailer axles. This basic trailer brake assembly are produced in huge quantity and sold million pcs per year to America and Canada. The original design for 12’’ electric brake assembly are fit for those trailer axles with the load of 6000 pounds, but with the reinforced black wire magnet, the brake assembly could work on 7000 lbs trailer axles.
Features
l Electric drum brakes are easy to install and control.
l Needs only an electric brake controller to work.
l No need actuator or hydraulic lines.
l 12" electric backing plate is electrophoretic-coated to resist corrosion.
l Periodic manual adjustment required.
l Electric brake assembly can exchange with most 5 lug trailer axles 6000 lbs, including Dexter, Hayes and many others.
Specifications 5 Hole Trailer Brake Assembly
Ø Dimension: 12 inch x 2inch
Ø Axle Capability: 6000 lbs Axle
Ø Mounting Flange Bolt Pattern: 5 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition 12" Drum Brake Assemblies
Ø 12” x 2" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø White/Black Wire Magnet x 1
Ø Magnet Lever x 1
Ø Springs x 2
Ø Adjuster x 1
Trailer Electric Backing Plate, Marine Trailer Mechanical Disc Brake, Hydraulic Trailer Brakes Wholesaler.
12" x 2" Trailer Electric Brake Assembly with Parking
Name: 12" x 2" Trailer Electric Brake Assembly with Parking
Capacity: For 6,000 Axle
Trailer Galvanized Electric Brake Part No.: EP12B
Description: 12 inch x 2 inch trailer electric backing plate with parking is electrophoretic-coated.
ATM (Aggregate Trailer Mass)
GTM (Gross Trailer Mass)
In Australia, all trailers with ATM or GTM over 2000kg must have a Breakaway Brake setup that will immediately apply the trailer brakes in the event of the trailer becoming disconnected from the towing vehicle. trailer axles with electric brakes always equipped with handbrake to meet the Australia Standard.
Features
l Electric brake assemblies with hand brake make you a better trip.
l Needs only an electric brake controller to work.
l 12" backing plate is electrophoretic-coated to resist corrosion.
l Periodic manual adjustment required.
l 12" x 2" Trailer Electric Brake Assembly with Parking can work with most electric trailer brake system 5200 lbs trailer axle, 6000 lbs trailer axle and 7000 lbs axle, including Dexter, Hayes and many others.
Specifications Electric Trailer Brake System
Ø Dimension: 12 inch x 2inch
Ø Axle Capability: 5200 lbs/6000 lbs/7000 lbs Axle
Ø Mounting Flange Bolt Pattern: 5 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition 12" Backing Plate
Ø 12” x 2" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø White/Black Wire Magnet x 1
Ø Magnet Lever x 1
Ø Handbrake x 1
Ø Springs x 2
Ø Adjuster x 1
Trailer Galvanized Electric Brake, Boat Trailer Mobile Home Backing Plate, Hydraulic Disc Brake Caliper Supplier
9" x 1-3/4" Trailer Hydraulic Brake Assembly
Name:9” x 1-3/4” Trailer Hydraulic Brake Assembly
Capacity: 13"-14" Wheel 1,450 kgs Axle
15"-16" Wheel 1,200 kgs Axle
Part No.: HN09B
Trailer Galvanized Electric Brake Description: 9 inch inch trailer hydraulic backing plate is electrophoretic-coated.
9” x hydraulic trailer drum brake comes complete with shoes, springs and hydraulic cylinder ready to bolt on. The maximum capacity of one 9" hydraulic trailer drum brake kit is 1200 kg for 15” or 16” wheel, and 1450 kg is for 13” or 14” wheel. 9” hydraulic backing plate mounts on standard 4 bolt flange. 9” trailer brake assemblies are most often used to tow boat trailers and most RVs in saltwater. The 9 inch hydraulic brakes need less ongoing maintenance than 9 inch mechanical brakes, but be more expensive to install or replace.
Features
l Requires Wheel Cylinder and hydraulic lines (sold separately).
l E-coated backing plates resist wear and corrosion.
l Less ongoing maintenance.
l These 9” hydraulic trailer brakes exchange with most axle brands including AL-KO and many standard brakes.
l Fully Assembled; Quick and easy installation.
SpecificationsBoat Trailer Hydraulic Disc Brake Caliper
Ø Dimension: 9 inch x 1 3/4 inch
Ø Axle Capability: 1200 kg Axle (15”/ 16” Wheel), 1450 kg Axle (13” / 14” Wheel)
Ø Mounting Flange Bolt Pattern: 4 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition 9" Trailer Hydraulic Backing Plate
² 9” x 1 3/4" Brake Shoe Kit x 1
² E-Coated Back Plate x 1
² Wheel Cylinder x 1
² Long spring x 1
² Short spring x 1
Our company hot selling hydraulic disc brakes and electric backing plate. We have a whole set of quality management system. If you have interested in our trailer axles, please feel free to contact us.
12” x 2” hydraulic free backing brakes have left hand (driver’s side) and right hand (passenger’s side). The 12" drum brake assemblies require manual adjustment and mount to 5-bolt flange. Customers call these hydraulic brake assembly 5200 lb to 7000 lb (, 6k, 7k), they are same and work with 12 inch trailer brake drums. The free-backing plates will allow your trailer to back up without having the brakes lock up. We are the trailer hydraulic backing plate factory in China, all of our trailer brakes are up to OEM quality.
Features
l Using with surge trailer brake actuators.
l Regular manual adjustment required
l The trailer rolls free when backing up, even if the actuator is activated.
l E-coated backing plates provide corrosion protection.
l Single plunger design.
l This brakes exchange with most standard hydraulic brakes, such as Dexter, Titan, Demco, Axletek, etc.
Specifications
Ø Dimension: 12 inch x 2 inch
Ø Axle Capability: 5200 - 6000 - 7000 lbs Axle (, 15", 16”, Wheel)
Ø Mounting Flange Bolt Pattern: 5 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12” x 2" Bonded Free Backing Brake Shoe Kit x 1
² E-Coated Back Plate x 1
² Single-Servo Wheel Cylinder x 1
² Springs x 2
Our company hot selling hydraulic disc brakes and electric backing plate. We have a whole set of quality management system. If you have interested in our trailer axles, please feel free to contact us. More information please view here.
10" x 2-1/4" Trailer Hydraulic Uni-Servo Brake Assembly
Name: 10" x 2-1/4” Trailer Hydraulic Uni-Servo Brake Assembly
Capacity: For 3,500 lbs. Axle
Trailer Galvanized Electric Brake Part No.: HU10B
Description: 10 inch x inch trailer hydraulic uni-servo backing plate is electrophoretic-coated.
10 inch hydraulic drum brakes are rated lbs per pair. 10” x ” trailer hydraulic backing plate is fully assembled for a quick and easy installation. The hydraulic drum brakes for trailers are ready to bolt to the 4-hole mounting flange. These hydraulic trailer brake kit interchanges with most major brands of axles, without modifying the axle or mounting flange, such as Demco, Atwood, Axletek, Lippert and Dexter. Please note that the hydraulic brake assembly will deliver 20 percent braking when traveling in reverse.
Features
l Hydraulic drum brake assemblies are designed for use with a surge-type trailer brake actuator (sold separately).
l Fully Assembled; Quick and easy installation.
l E-coated backing plates resist wear and corrosion.
l Periodic manual adjustment required.
l These 10" hydraulic uni-servo trailer brakes exchange with most axle brands including Dexter, AL-KO, etrailer, Demco and many others.
Specifications Marine Trailer Brakes
Ø Dimension: 10 inch x 2 1/4 inch
Ø Axle Capability: 3500 lbs Axle (13", 14”, 15" Wheel)
Ø Mounting Flange Bolt Pattern: 4 bolt
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition 10 Inch Hydraulic Drum Brakes For Trailers
² 10” x 2 1/4" Bonded Uni-Servo Brake Shoe Kit x 1
² E-Coated Back Plate x 1
² Single-Servo Wheel Cylinder x 1
² Springs x 2
² Adjuster X 1
Hot Sale Various High Quality Trailer & Boat Trailer Axles and Suspension from China leading manufacturer. Our trailer brake kits are efficient, cost effective and deliver more benefits. Welcome to choose us!
Name: Mechanical Forward Pull Brake Caliper
Capacity: 13"-14" wheels 1550 kg Axle
15"-16" wheels 1450 kg Axle
Trailer Hydraulic Disc Brake Caliper is also called mechanical disc brake, is made of cast iron material dacromet coated. The stainless steel material is available. It’s for boat trailer and utility trailers.
This mechanical forward pull disc brake caliper is old type. Every caliper body has two matels, cast iron (dacromt treatment) and stainless steel. The trailer mechanical disc brake calipers have two configurations, forwarder pull and centre pull. The forward pull is commonly used on beam/spring axle, and he centre pull is used on independent/torsion axle.
This mechanical forward pull disc brake is old version, it is usually called as boat trailer mechanical brake caliper. It has a hot dip galvanized cast iron caliper body with two pieces non-asbestos semi-metal brake pads and a straight lever. Cast iron and stainless steel are available. All trailer brake calipers provide corrosion resistance and rust protection, which are advantageous to prolong the service of marine trailers.
Features
l Requirement of disc hubs and rotors: Thicknesses from 12 mm to 15 mm.
l Galvanized coated and stainless steel accessories can prevent the corrosion of seawater.
l Mounting bolts and pads are included. Quick and easy installation.
l Mechanical Disc Brakes are more affordable than hydraulic disc brakes.
l This mechanical disc brake calipers exchange with AL-KO calipers.
Specifications
Ø Axle Capability: 1700 kg (15”/16” wheel), 2000 kg (13”/14” wheel)
Ø Mounting Bolts: 12 mm
Ø Bolt Spacings: mm ()
Ø Max cable pull input (kg) per brake: 300 kg
Product Composition
² Non-asbestos semi-metal brake pads x 2
² Galvanized Cast Iron Brake Caliper Body x 1
² Slide Pin Kit x 1
² Slide Dust Boot x 2
² Straight Lever x 1
Name: Stainless Steel Disc Hydraulic Brake Caliper
Capacity: 13"-14" wheels 1600 kg Axle
15"-16" wheels 1400 kg Axle
Part No.: BCH-SS
Trailer Hydraulic Disc Brake Caliper Description: This hydraulic disc brake is made of stainless steel material. It has stainless steel brake pads. Yingtu is a manufacturer of Recreational Vehicles Brake Caliper .We have a high-tech work shop. We have a complete quality management system. Choose us, you can be get most careful and thoughtful service! More information please view here.
The trailer brake caliper is stainless steel material, it has a phenolic piston and two pieces of ceramic material stainless steel backing plate brake pads. Upgraded trailer calipers have high rust-protection, high corrosion resistance and excellent anti-wear performance. The hydraulic trailer brake calipers suitable for boat trailers, box trailers and car trailers. This caliper will fit AL-KO trailer hydraulic disc brakes that use a 5 or 6 lug trailer disc rotor. Other specifications are same as the cast iron trailer hydraulic disc brake type.
Features
l Used with IQ7 or hydraulic over ride couplings (the load weights exceeding 2000 kg).
l Requirement of disc hubs and rotors: Thicknesses from 12 mm to 15 mm.
l Stainless steel caliper body and pads backing plate can prevent the corrosion of seawater.
l Mounting bolts, spring washers and pads are included. Quick and easy installation.
l This hydraulic disc brake calipers exchange with AL-KO and Trojan calipers, but have different appearance.
Specifications
Ø Axle Capability: 1400 kg (15”/16” wheel), 1600 kg (13”/14” wheel)
Ø Mounting Bolts: 12mm . x 45mm
Ø Bolt Spacings: ()
Ø Recommended operating pressure: mpa (1000psi)
Product Composition
² Non-asbestos semi-metal brake pads x 2
² Galvanized Cast Iron Brake Caliper Body x 1
² Bleed Screw x 1
² Phenolic Resin Piston x 1
² Piston Seal x 1
² Piston Dust Boot x 1
² Slide Pin Kit x 1
² Slide Dust Boot x 2
Yingtu is a manufacturer of Recreational Vehicles Brake CaliperWe have a high-tech work shop. We have a complete quality management system. Choose us, you can be get most careful and thoughtful service! More information please view here.
The trailer mechanical disc brake calipers have two configurations, forwarder pull and centre pull. The forward pull is used on beam axle, and he centre pull is used on independent rubber suspension.
These trailer mechanical disc brakes are designed to suit the toughest marine environment, regularly for boat trailers. These light duty forward pull trailer brake calipers are easy to cooling and washed after dunked in corrosive salt water. This trailer mechanical brake caliper is hot dip galvanized cast iron caliper body with two pieces non-asbestos semi-metal brake pads, dacromet coated and stainless steel are available. The bushes, springs and bolts etc. are made from stainless steel.
Features
l Requirement of disc hubs and rotors: Thicknesses from 12 mm to 15 mm.
l Galvanized coated and stainless steel accessories can prevent the corrosion of seawater.
l Mounting bolts and pads are included. Quick and easy installation.
l Mechanical Disc Brakes are more affordable than hydraulic disc brakes.
l This mechanical disc brake calipers exchange with AL-KO calipers.
Specifications
Ø Axle Capability: 1000 kg (15”/16” wheel), 1300 kg (13”/14” wheel)
Ø Mounting Bolts: 7/16 UNF
Ø Bolt Spacings: ()
Ø Max cable pull input (kg) per brake: 200 kg
Product Composition
² Non-asbestos semi-metal brake pads x 2
² Galvanized Cast Iron Brake Caliper Body x 1
² Inner & Outer Bushes x 2
² Return Spring x 1
² Straight Lever x 1
This mechanical disc brake is made of cast iron material dacromet coated. The stainless steel material is available. It’s for boat trailer and utility trailers. More information please view here.
This hydraulic disc brake is made of cast iron material dacromet coated. The galvanized trailer hydraulic disc brake caliper is made from cast iron, has a phenolic piston and two pieces of non-asbestos semi-metal brake pads. Having excellent anti-rust, anti-corrosion, and anti-wear performance. This trailer hydraulic disc brakes fit the hubs / rotors which have 5 x PCD, 5x PCD, 5 x PCD or 6 x PCD, they suitable for installations where more than one axle is used. This trailer hydraulic brake caliper applies to boat trailers, caravans, car trailers and box trailers. The hydraulic brake caliper is easy to install, it can replace the AL-KO hydraulic calipers.
Features
l Used with IQ7 or hydraulic over ride couplings (the load weights exceeding 2000 kg).
l Requirement of disc hubs and rotors: Thicknesses from 12 mm to 15 mm.
l Galvanized coated can prevent the corrosion of seawater.
l Mounting bolts, spring washers and pads are included. Quick and easy installation.
l This hydraulic disc brake calipers exchange with AL-KO and Trojan MK7 calipers, but have different appearance.
Specifications
Ø Axle Capability: 1400 kg (15”/16” wheel), 1600 kg (13”/14” wheel)
Ø Mounting Bolts: 12mm . x 45mm
Ø Bolt Spacings: ()
Ø Recommended operating pressure: mpa (1000psi)
Product Composition
² Non-asbestos semi-metal brake pads x 2
² Galvanized Cast Iron Brake Caliper Body x 1
² Bleed Screw x 1
² Phenolic Resin Piston x 1
² Piston Seal x 1
² Piston Dust Boot x 1
² Slide Pin Kit x 1
² Slide Dust Boot x 2
Our company hot selling hydraulic disc brakes and electric backing plate. We have a whole set of quality management system. If you have interested in our trailer axles, please feel free to contact us. More information please view here.
Trailer Leaf Spring Axle with Idler Hubs
Name: Trailer Leaf Spring Axle with Idler Hubs - 2000 lb to 12,000 lb
Description: This spring axle work with two idler hub assemblies. We have a large variety of trailer and boat trailer axles. The axles are available in leaf spring or torsion suspension from 2,000 lbs to 1,2000 lbs capacities. What’s more, we can produce it according to customer's requests, drawings or samples.
Buy low price, high quality Car Trailer，choose our products，Yingtu is the leading utility trailers factory, Warmly welcome new and old customers to visit and patronize! More information please view here.
Name: Trailer Axles
Description: We have a large variety of trailer and boat trailer axles fit drum brakes, disc brakes or idler hubs. The axles are available in leaf spring or torsion suspension from 2,000 lbs to 1,2000 lbs capacities. What’s more, we can produce it according to customer's requests, drawings or samples.
Buy low price, high quality Car Trailer，choose our products，Yingtu is the leading utility trailers factory, Warmly welcome new and old customers to visit and patronize! More information please view here.
|
√ |
Trailer Backing Plate |
√ |
10,000 lb. |
|
√ |
Electric Brake Assembly |
√ |
Forward Self Adjusting (FSA) |
|
√ |
Trailer Drum Brakes |
√ |
Electric Drum Brakes |
|
√ |
12 1/4” x 4” Drum |
√ |
Trailer Brakes |
12-1/4" x 4" trailer electric brake assemblies are self-adjusting brakes, these inch trailer brakes fit 10,000 lbs trailer axles. The mounting plate is 7 hole pattern.
Features
l ” x 4” Trailer Drum Brakes fit 7 mounting flange for 10k lb. trailer axles.
l Self-adjusting electric brake assembly don’t need for manual brake adjustments.
l Completely assembled and easily installation, can exchange with most trailer brake manufacturers.
l The brake linings are high quality non-asbestos, semi-metal friction material.
l Fits 16" or larger wheels.
Specifications
Ø Dimension: inch x 4 inch
Ø Axle Capability: 10000 lbs Heavy Duty Axle
Ø Mounting Flange Bolt Pattern: 7 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
² 12 1/4” x 4" Electric Brake Shoe Set x 1
² 7 Bolt Mounting Cast Backing Plate x 1
² Magnet Lever x 1
² Yellow Wire Magnet x 1
² Brake Adjuster x 1
² Long Spring x 1
² Short Spring x 2
We have a large variety of trailer and boat trailer axles fit drum brakes, disc brakes or idler hubs. The axles are available in leaf spring or torsion suspension from 2,000 lbs to 1,2000 lbs capacities. What’s more, we can produce it according to customer's requests, drawings or samples. More information please view here.
This trailer disc brake axle work with two pieces of disc brake rotors and disc brakes. We have a large variety of trailer and boat trailer axles, such as trailer axle with mechanical disc brakes and trailer axle with hydraulic disc brakes. The axles are available in leaf spring or torsion suspension from 2,000 lbs to 1,2000 lbs capacities. What’s more, we can produce it according to customer's requests, drawings or samples. More information please view here.
Self adjusting electric brake assembly is a brilliant design for trailer electric brake system. Al-KO call it Nev-R-Adjust which is mainly for the trailer axles 2000lbs to 4000lbs later than 2009. It will adjust itself when the trailer axle brakes are worn thinner. The distance between brake lining and drum will always keep a very close so that the strength you step the brake pedal will never need change till the brake shoes are worn out.
Features
l 10 inch electric brakes are easy to install and control.
l Needs only an electric brake controller to work.
l No need actuator or hydraulic lines.
l No need adjusts manually.
l Trailer brake parts are always in the perfect distance to the drums.
l Brake mounting bolts are included.
l 10’’ x self-adjust Electric brake assembly can exchange with most 4 lug trailer axles not over 4000 lbs, including Dexter, AL-KO and many others.
Specifications
Ø Dimension: 10 inch x 2 1/4 inch
Ø Axle Capability: 3500 lbs Axle
Ø Mounting Flange Bolt Pattern: 4 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
Ø 10” x 2 1/4" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø Green Wire Magnet x 1
Ø Magnet Lever x 1
Ø Self-adjust cable
Ø Springs x 2
Ø Adjuster x 1
|
√ |
Self-Adjustment |
√ |
trailer axle parts |
|
√ |
Nev-R-Adjust |
√ |
trailer axle brakes |
|
√ |
6000 lbs trailer axle |
√ |
trailer brake parts |
Self-adjusting 12" trailer drum brakes is a very nice design for trailer brake system. Al-KO call it Nev-R-Adjust. With the fine-tooth adjuster, with the adjuster cable, self adjusting electric brake assembly will adjust the distance between brake lining and trailer brake kit drum.
Features
l 12 inch electric brake assembly is easy to install and control.
l 12 inch x 2 inch trailer electric backing plate is electrophoretic-coated.
l Needs only an electric brake controller to work.
l No need manual adjustment.
l Self-adjusting 12 inch trailer brakes can work with most electric brake trailer axle 6000 lbs including Dexter, Hayes and many others.
Specifications
Ø Dimension: 12 inch x 2inch
Ø Axle Capability: 6000 lbs Axle
Ø Mounting Flange Bolt Pattern: 5 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
Ø 12” x 2" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø Black/white wire Magnet x 1
Ø Magnet Lever x 1
Ø Adjust cable x 1
Ø Springs x 2
Ø Adjuster x 1
10 inch electric trailer brake assemblies has the completely same function as RVH, but with a very different design. 10’’ x 2¼’’ electric brake with parking feature is very hot in America. It is designed to use 10" brake drums. They offer more user control than common electric brakes. With the brake cable, the brake assembly with parking brake can work in a much safer situation.
Features
l electric trailer brakes with parking brake are much more reliable and easy to control.
l No need actuator or hydraulic lines.
l 10" trailer backing plate is E-coated to resist corrosion.
l Periodic manual adjustment required.
l Brake mounting bolts are included.
l Manual parking brake lever included
l Exchange with most trailer axle 3500 pounds, including Dexter.
Specifications
Ø Dimension: 10 inch x 2¼ inch
Ø Axle Capability: 3500 lbs Axle
Ø Mounting Flange Bolt Pattern: 4 bolts
Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH
Product Composition
Ø 10” x 2 1/4" Brake Shoe Set x 1
Ø E-coat Backing Plate x 1
Ø Green Wire Magnet x 1
Ø Magnet Lever x 1
Ø Springs x 2
Ø Adjuster x 1
We have range of trailer brakes and hubs, more informations view here.