rolling door making machine
Shutter door making machine
roller shutter door roll forming machine, automatic rolling door making machine
Product Application:
This Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.
Technological process:
Uncoiler-Feeding-Leveling-hydraulic punching-Hydraulic cutting-Roll forming-Output table
Technical parameter:
Color steel sheet , galvanized steel sheet,aluminum sheet |
|
(L*W*H): |
** |
4KW with Cycloidal reducer |
|
4KW |
|
5. Hydraulic oil pump |
CB-E 310 |
Φ70-90mm |
|
1000-1250mm |
|
380V 3phase 50HZ or as the customer's requirements |
|
High grade 45# forged steel plated with hard chrome plating |
|
PLC |
|
8-12m/min(glazed tile is 2-3m/min) |
|
precision within |
(depend on design) |
blade |
Cr12 mould steel with quenched treatment |
11-20 Rollers |
|
high grade 45#steel; Cr12 quenching |
|
18. Leak frame load-bearing |
Rollers
In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.
Roller Station:11-18rows
Or custome an customer's requirements Thickness of feeding material:
Computer Control Cabinet
It adopts MITSUBISHI PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Hydraulic Station
It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.
Power of The Pump:4kw
Hydraulic oil :40#
cable bridge forming machine
Custom Design cable bridge forming machine, cable bridge forming machine Factory
Dimensions:780cmx800cmx200cm
This machine is making all kinds of cable bridge panel with holes as customer need or designing as customers' country need.
If you have detail request, pls let us know, we will do our offer and technology to you soon.
Packing:Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Plate punching marking machine
Punching marking making machine
iron aluminum plate punching making machine
Specification:
Dimension:200cmx190cmx175cm
Weight:350KG
This machine is designed as customered with different dot or pictures.
Packing:
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Supermarket shelf panel making machine
customize steel plate making machine
More details:
Size: **
Mateiral: Iron
Product Feature: this machine is making Supermarket shelf panel and support panel.
It is very popular in China and Korean market.
We can design the shape and sizes as customer need and we also have our standard designing drawing and szies.
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Down the sink pipe downpipe rain gutter cold roll forming machinery
gutter roll forming machine
Description: automatic rain gutter pipe forming machine
Dimension: 7000(L) * 1700(W) * 1600mm(H)
Machine weight: Approx. T
Frame material: 300 H steel
Thickness of steel plate: 16mm
Forming axis: diameter of 75 mm, 45 # quenched and tempered
45 # forged molding chakra: material, hard chromium plating
Drive: by wheel and chain
The computer automatic control, PLC of Siemens
Line speed: 650 m/h
Production rate: T/h (for sheet)
Coil weight: Max. 8 T
Sheet thickness: mm
Gear reducer: KW planetary cycloidal reducer
Pump station: 4 KW
Power supply: 380V, 50Hz, 3 phase
This roll forming line mainly consists of main frame, pump station, electric control panel and exit roller way etc.
Packing:
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
Cheap price small c u z roll forming machine
small c purlin roll forming machine, small u purlin roll forming machine
This machine is used to make steel C Z shape purlins for buildings. Many sizes of purlin can be produced on one machine. The line mainly consist of uncoiler , coil sheet guiding device ,flattening device ,roll forming system , punching equipment ,cutting equipment , hydraulic station ,PLC controlling and support table. We also can produce according to customer's c z purlin cold roll forming machine is a machine can produce many sizes,Generally,there are three types of machine, c purlin machine, z purlin roll forming machine, C Z Section Steel Purlin Machine. The Web width can be 60-300mm Flange height can be 30-80mm, it is adjustable from min to max. The size of holes can be design by customers. This C Z Used Roll Forming Machine consists of uncoiler,feeding and straightening,punching and cutting part, main roll forming part,cutting device and runout table.
Main Parameter of Roll Forming Machine:
No. Item
1. Processing Material: PPGI,GI
2. Material Width(mm): 1220
3. Processing Thickness(mm) :
4. Material of Rollers: 45# steel,with hard chrome coated
5. Diameter of Shaft: Ф80mm
6. Production Speed :8---12m/min
7. Cutting Model :Hydraulic Profile Cutting
8. Control Style: PLC
9. Total Power :15kw
10. Operation Model :380V 50HZ or as buyer's request
11. The size :
Name: Hydraulic Station
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Name:Computer Control Cabinet
It adopts MITSUBISHI PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Light Steel Keel Making Machine ,Furring Roll Forming Machine
Light Steel Keel Making Machine Supplier, lightweight building board molding machine
Main Technic Parameter:
Light keel roll forrming machine |
||
No. |
Item |
Specifications |
1 |
Coil Width |
according to profile |
2 |
Diameter of shaft |
80mm |
3 |
Forming Speed |
8-12meters/min |
4 |
Middle plate |
18mm |
5 |
Material of shaft |
45#steel with tempering |
6 |
forming thickness |
|
7 |
material of rollers |
Bearing steel |
8 |
Cutting type |
hydraulic -cutting |
9 |
Main power |
11kw |
10 |
Main frame |
300H steel |
11 |
Control system |
PLC |
12 |
Brand of electrical parts |
Delta |
13 |
Manual decoiler |
5 tons |
14 |
Power |
3 Phase,380 Voltage,50Hz |
15 |
Dimensions(L*W*H) |
About 8**M |
16 |
Weight |
about 5 tons |
High quality rollers will help to produce the beautiful and high quality profile. That will satisfy your customers.
Using high quality 95mm thick shaft, the strength is more durable.
Automatic Uncoiler With moving car
It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by automatic.
Loading capacity:5T
Inner diameter: 450-508mm
Glazed Tile Roll Forming Machine
Glazed Roof Tile Board Forming Machine
This machine can be used to produce Color Steel Roof Tile Board, Corrugated Wall Panel, Metal Sheet Roof Board, Metal Sheet Wall Panel Board, Color Steel Roof Sheet, Glazed Roof Tile Board, Color Steel Wall Panel Board, Color Steel Roof Tile Panel, Metal Ridge Cap, Iron Steel Ridge Sheet Roll, PPGI Corrugated Roof Tile, Color Glazed Steel Roof Tile, Steel Corrugated Roof Tile, Corrugated Color Steel Roof Tile, Wall Panel, Corrugated Wall Panel Board, Corrugated Sheet Panel etc.
Glazed steel tile roll forming machine
Feeding width |
1000mm. |
Cover width |
828mm |
Yield stress |
235Mpa (33KSI) ~ 345Mpa (50KSI). |
Roll forming Speed |
15-18 m/min |
Cutting Tolerance |
+/(length≤5000mm); +/(5000mm<length≤10000mm). |
Manual Uncoiler |
Max. Capacity: 5000kgs. |
Coil inner diameter |
508mm. |
Voltage |
380V,3 Phase,50HZ,Or As per customer's request. |
Numbers of stands |
17 stations |
Type of cutting |
Roll-formed and length-set profile cutting. |
Feeding platform
decking floor making machine
floor decking roll forming machine, decking floor roll forming machine
The product produced by these series machine is used for floor decking in building. We need't dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, we neednt decorate the ceiling again, due to it is beautiful enough. This series product is suitable for streel structure factory and public big building.
Technical parameter
|
Items |
Specifications |
Material of coil |
Material Width |
1250mm |
Material Thickness |
||
Uncoiler |
5 tons manual |
|
Forming system |
Rolling Speed |
6-15m/min |
Roller Stations |
14 stations |
|
Roller Material |
45# steel, Electroplating |
|
Material of shaft |
45 steel |
|
Shaft DIA |
D76mm |
|
Maim Motor Power |
15kw |
|
Hydraulic cutting Power |
||
Cutting system |
Material Of Cutting |
CR12Mov |
Tolerance |
+ |
|
Electrical control system |
Electric Source |
380V, 50HZ,3 phase |
Control System |
PLC (Panasonic) |
|
Way Of Drive |
single chain |
Rollers
In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.
Roller chrome coated thickness: mm.
roof wall panel double layer roll forming machine
roll forming machine
double layer roll forming machine
This type of roof sheet has advantage inclouding beautiful, classical appearance and grace taste.
It can be widely used in village, hotel, exhibition, vocation vallage, family construction and outdoor decorate.
Wall/roof roll forming machine |
|
Suitable to Process |
Color steel sheet Galvanized sheet Iron sheet Aluminum sheet Stainless steel sheet |
Width of raw material |
1000mm/1200mm/12500mm (according to customer requirements) |
Rollers |
customized |
Dimensions |
7000*1550*1300mm |
Power |
|
Thickness of sheet |
|
Material of cutting blade |
Cr12 |
Diameter of the roller |
customized |
Voltage |
380V(Customized according to customer requirements ) |
weight |
5T |
Productivity |
10-18m/min |
Control system |
PLC control |
sandwich panel roll forming machine
EPS sandwich panel roll forming machine, roll forming machine,composite board making machine
This production line adopts superior technology by pneumatic,electricity,and mechanism,which is the specialized machine for producing color steel sandwich production speed can be adjusted by stepless speed complete line includes uncoiling machine,forming machine,compositing machine(ribs forming,rubber coating,warming processing,pneumatic auto cutting),It’s necessary for making wall and roof panel of workshop,storage and so on.
Technical parameter:
Overall power equipment: |
36 kw |
Size of the line: |
overall length of the line is 28000mm |
Voltage |
380V,50Hz or as customer need |
Produced panel thickness |
50-200mm |
Overall width of the line: |
2200mm(max) |
Overall height of the line: |
2100mm |
Overall weight of the line: |
~20 t |
rolling door making machine
Shutter door making machine
roller shutter door roll forming machine, automatic rolling door making machine
Product Application:
This Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.
Technological process:
Uncoiler-Feeding-Leveling-hydraulic punching-Hydraulic cutting-Roll forming-Output table
Technical parameter:
Color steel sheet , galvanized steel sheet,aluminum sheet |
|
(L*W*H): |
** |
4KW with Cycloidal reducer |
|
4KW |
|
5. Hydraulic oil pump |
CB-E 310 |
Φ70-90mm |
|
1000-1250mm |
|
380V 3phase 50HZ or as the customer's requirements |
|
High grade 45# forged steel plated with hard chrome plating |
Custom Design cable bridge forming machine, cable bridge forming machine Factory
Dimensions:780cmx800cmx200cm
This machine is making all kinds of cable bridge panel with holes as customer need or designing as customers' country need.
If you have detail request, pls let us know, we will do our offer and technology to you soon.
Packing:Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Plate punching marking machine
Punching marking making machine
iron aluminum plate punching making machine
Specification:
Dimension:200cmx190cmx175cm
Weight:350KG
This machine is designed as customered with different dot or pictures.
Packing:
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Supermarket shelf panel making machine
customize steel plate making machine
More details:
Size: **
Mateiral: Iron
Product Feature: this machine is making Supermarket shelf panel and support panel.
It is very popular in China and Korean market.
We can design the shape and sizes as customer need and we also have our standard designing drawing and szies.
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
gutter roll forming machine
Description: automatic rain gutter pipe forming machine
Dimension: 7000(L) * 1700(W) * 1600mm(H)
Machine weight: Approx. T
Frame material: 300 H steel
Thickness of steel plate: 16mm
Forming axis: diameter of 75 mm, 45 # quenched and tempered
45 # forged molding chakra: material, hard chromium plating
Drive: by wheel and chain
The computer automatic control, PLC of Siemens
Line speed: 650 m/h
Production rate: T/h (for sheet)
Coil weight: Max. 8 T
Sheet thickness: mm
Gear reducer: KW planetary cycloidal reducer
Pump station: 4 KW
Power supply: 380V, 50Hz, 3 phase
This roll forming line mainly consists of main frame, pump station, electric control panel and exit roller way etc.
Packing:
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
small c purlin roll forming machine, small u purlin roll forming machine
This machine is used to make steel C Z shape purlins for buildings. Many sizes of purlin can be produced on one machine. The line mainly consist of uncoiler , coil sheet guiding device ,flattening device ,roll forming system , punching equipment ,cutting equipment , hydraulic station ,PLC controlling and support table. We also can produce according to customer's c z purlin cold roll forming machine is a machine can produce many sizes,Generally,there are three types of machine, c purlin machine, z purlin roll forming machine, C Z Section Steel Purlin Machine. The Web width can be 60-300mm Flange height can be 30-80mm, it is adjustable from min to max. The size of holes can be design by customers. This C Z Used Roll Forming Machine consists of uncoiler,feeding and straightening,punching and cutting part, main roll forming part,cutting device and runout table.
Main Parameter of Roll Forming Machine:
No. Item
1. Processing Material: PPGI,GI
2. Material Width(mm): 1220
3. Processing Thickness(mm) :
4. Material of Rollers: 45# steel,with hard chrome coated
5. Diameter of Shaft: Ф80mm
6. Production Speed :8---12m/min
7. Cutting Model :Hydraulic Profile Cutting
8. Control Style: PLC
9. Total Power :15kw
10. Operation Model :380V 50HZ or as buyer's request
11. The size :
Name: Hydraulic Station
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Name:Computer Control Cabinet
It adopts MITSUBISHI PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Light Steel Keel Making Machine ,Furring Roll Forming Machine
Light Steel Keel Making Machine Supplier, lightweight building board molding machine
Main Technic Parameter:
Light keel roll forrming machine |
||
No. |
Item |
Specifications |
1 |
Coil Width |
according to profile |
2 |
Diameter of shaft |
80mm |
3 |
Forming Speed |
8-12meters/min |
4 |
Middle plate |
18mm |
5 |
Material of shaft |
45#steel with tempering |
6 |
forming thickness |
|
7 |
material of rollers |
Bearing steel |
8 |
Cutting type |
hydraulic -cutting |
9 |
Main power |
11kw |
10 |
Main frame |
300H steel |
11 |
Control system |
PLC |
12 |
Brand of electrical parts |
Delta |
13 |
Manual decoiler |
5 tons |
14 |
Power |
3 Phase,380 Voltage,50Hz |
15 |
Dimensions(L*W*H) |
About 8**M |
16 |
Weight |
about 5 tons |
High quality rollers will help to produce the beautiful and high quality profile. That will satisfy your customers.
Using high quality 95mm thick shaft, the strength is more durable.
Automatic Uncoiler With moving car
It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by automatic.
Loading capacity:5T
Inner diameter: 450-508mm
Glazed Tile Roll Forming Machine
Glazed Roof Tile Board Forming Machine
This machine can be used to produce Color Steel Roof Tile Board, Corrugated Wall Panel, Metal Sheet Roof Board, Metal Sheet Wall Panel Board, Color Steel Roof Sheet, Glazed Roof Tile Board, Color Steel Wall Panel Board, Color Steel Roof Tile Panel, Metal Ridge Cap, Iron Steel Ridge Sheet Roll, PPGI Corrugated Roof Tile, Color Glazed Steel Roof Tile, Steel Corrugated Roof Tile, Corrugated Color Steel Roof Tile, Wall Panel, Corrugated Wall Panel Board, Corrugated Sheet Panel etc.
Glazed steel tile roll forming machine
Feeding width |
1000mm. |
Cover width |
828mm |
Yield stress |
235Mpa (33KSI) ~ 345Mpa (50KSI). |
Roll forming Speed |
15-18 m/min |
Cutting Tolerance |
+/(length≤5000mm); +/(5000mm<length≤10000mm). |
Manual Uncoiler |
Max. Capacity: 5000kgs. |
Coil inner diameter |
508mm. |
Voltage |
380V,3 Phase,50HZ,Or As per customer's request. |
Numbers of stands |
17 stations |
Type of cutting |
Roll-formed and length-set profile cutting. |
Feeding platform
decking floor making machine
floor decking roll forming machine, decking floor roll forming machine
The product produced by these series machine is used for floor decking in building. We need't dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, we neednt decorate the ceiling again, due to it is beautiful enough. This series product is suitable for streel structure factory and public big building.
Technical parameter
|
Items |
Specifications |
Material of coil |
Material Width |
1250mm |
Material Thickness |
||
Uncoiler |
5 tons manual |
|
Forming system |
Rolling Speed |
6-15m/min |
Roller Stations |
14 stations |
|
Roller Material |
45# steel, Electroplating |
|
Material of shaft |
45 steel |
|
Shaft DIA |
D76mm |
|
Maim Motor Power |
15kw |
|
Hydraulic cutting Power |
||
Cutting system |
Material Of Cutting |
CR12Mov |
Tolerance |
+ |
|
Electrical control system |
Electric Source |
380V, 50HZ,3 phase |
Control System |
PLC (Panasonic) |
|
Way Of Drive |
single chain |
Rollers
In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.
Roller chrome coated thickness: mm.