ZIJIE TRADING COMPANY

ZIJIE TRADING COMPANY

Company Product

  • 80 ton pneumatic hydraulic jack
  • 80 ton pneumatic hydraulic jack

    80 ton pneumatic hydraulic jack

    This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 80 Ton. 

    can be used for safely lifting, trailers, heavy trucks, buses, construction vehicles and agricultural vehicles. also easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

    With a minimum height of just cm, almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up.

    ZIJIE supply pneumatic hydraulic jack which include 50 ton pneumatic hydraulic jack, 60 ton pneumatic hydraulic jack, pneumatic hydraulic beam jack and 80 ton pneumatic hydraulic jack. Our products have high quality and competitive prices.

    • Quality jack with two large rubber wheels and a long handle with soft rubber grips
    • First-class powder coating on entire construction, attractive and functional
    • Minimum jacking height cm and a narrow profile
    • Operates with reliable hold-to-run joystick
    • Shortcut for quick coupling of the air hose
    • The jack can be moved,  raised and dropped using the handle
    • The handle can be locked in 4 positions; 0 º-45º-90º-180º
    • The body has a 620 mm long reach
    • Increased load stability with wide base
    • The robust chassis is made from mm steel plate and provides ultimate protection of the internal parts
    • Internal and external hard-chrome cylinders resistant to wear and corrosion
    • Each cylinder is fitted with two seals to prevent any oil loss
    • Fast lifting by means of pneumatic high-pressure pump
    •  hook on the side of the chassis for the extensions
    • Screw cap on the chassis for maintaining and repairing .
    • Outside oil filling port for  easy oil refilling
    • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

     

    Lifting Weight:  

    80 Ton

    Working pressure:  

    Mpa

    Minimum Height:

    210mm

    Lifting Height:50ton:

    181mm,100ton:92mm

    Extension  Rod:

    38mm+60mm

    Working Pressure: 

    Net Weight:

     98Kg

     

    Final test

    Every air hydraulic floor jack is fully tested at the factory before being packed along with its documentation, ready for shipment!

     

    Warranty

    The extra low garage jacks are delivered with a one year warranty.

    Even after the warranty period expires, the test-department stands ready to assist you with technical support and information

     

    Included in your order

    • 100ton air hydraulic floor jack with wheels and handle
    • instructions for use
    • 38mm and 60 mm extension attachments
    • Pre-filled with hydraulic fluid
    • Packed weight is 108 kg with wooden case, 10 peices of handles with foam in one case ,handles case weights 95kg
    • Dimensions are L 725 x W 340 x H 330 mm
  • Send Inquiry
  • 60 ton pneumatic hydraulic jack(long body)
  • 60 ton pneumatic hydraulic jack(long body)

    60 ton pneumatic hydraulic jack(long body)

    This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 60 Ton. 

    can be used for safely lifting, trailers, heavy trucks, buses, construction vehicles and agricultural vehicles. also easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

    With a minimum height of just cm(can be customized by cm), almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up.

    ZIJIE supply pneumatic hydraulic jack which include 50 ton pneumatic hydraulic jack, 60 ton pneumatic hydraulic jack, pneumatic hydraulic beam jack and 80 ton pneumatic hydraulic jack. Our products have high quality and competitive prices.

     

     

    • Quality jack with two large rubber wheels and a long handle with soft rubber grips
    • First-class powder coating on entire construction, attractive and functional
    • Minimum jacking height cm and a narrow profile
    • Operates with reliable hold-to-run joystick
    • Shortcut for quick coupling of the air hose
    • The jack can be moved,  raised and dropped using the handle
    • The handle can be locked in 3positions; 90º-135º-180º
    • The body has a 860 mm long reach
    • Increased load stability with wide base
    • The robust chassis is made from mm steel plate and provides ultimate protection of the internal parts
    • Internal and external hard-chrome cylinders resistant to wear and corrosion
    • Each cylinder is fitted with two seals to prevent any oil loss
    • Fast lifting by means of pneumatic high-pressure pump
    • Hook on the side of the chassis for the extensions
    • Screw cap on the chassis for maintaining and repairing .
    • Outside oil filling port for  easy oil refilling
    • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

     

    Lifting Weight:  

    60 Ton

    Working pressure:  

    Mpa

    Minimum Height:

    185mm(can be customized of 170mm)

    Lifting Height:30ton:

    195mm,60ton:97mm

    Extension  Rod:

    38mm+60mm

    Working Pressure: 

    Net Weight:

     65Kg

     

    Final test

    Every air hydraulic floor jack is fully tested at the factory before being packed along with its documentation, ready for shipment!

     

    Warranty

    The extra low garage jacks are delivered with a one year warranty.

    Even after the warranty period expires, the test-department stands ready to assist you with technical support and information

     

    Included in your order

    • 60ton air hydraulic floor jack with wheels and handle
    • CE certificate and instructions for use
    • 38mm and 60 mm extension attachments
    • Pre-filled with hydraulic fluid
    • Packed weight is 74 kg with wooden case, 10 peices of handles with foam in one case ,handles case weights 95kg
    • Dimensions are L 855x W 325 x H 235 mm
  • Send Inquiry
  • Pneumatic hydraulic beam jack
  • Pneumatic hydraulic beam jack

    Pneumatic hydraulic beam jack

    This hydraulic jack requires compressed air from an air compressor to lift  automobile beam loads up to 50 Ton. 

    Can be used for safely lifting, trailers, heavy trucks, construction easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

    With a minimum height of 550mm or 650mm,. This allows an entire range of vehicles beam to be jacked up.

     Our company export pneumatic hydraulic jack, combi bead breaker, tyre equipment, 80 ton pneumatic hydraulic jack, air hydraulic pump with combi bead breaker and 60 ton pneumatic hydraulic jack. If you have interested in our products, please feel free to contact us.

     

    • Quality jack with two large rubber wheels and a long handle with soft rubber grips
    • First-class powder coating on entire construction, attractive and functional
    • Minimum  height 550 mm and 650mm can be choose
    • Operates with reliable hold-to-run joystick
    • Shortcut for quick coupling of the air hose
    • The jack can be moved,  raised and dropped using the handle
    • The handle can be locked in 3positions; 90º-135º-180º
    • Increased load stability with wide base
    • The whole body is made from mm steel plate and provides ultimate protection of the internal parts
    • Internal and external hard-chrome cylinders resistant to wear and corrosion
    • Each cylinder is fitted with two seals to prevent any oil loss
    • Fast lifting by means of pneumatic high-pressure pump
    • Hook on the side of the chassis for the extensions
    • Screw cap on the chassis for maintaining and repairing.
    • Outside oil filling port for  easy oil refilling
    • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

     

    Lifting Weight:  

    50 Ton

    Working pressure:  

    Mpa

    Minimum Height:

    or 650 mm

    Max  Height:

    1150mm

    Extension  Rod:

    38mm+60mm

    Working Pressure: 

    Net Weight:

     103Kg
  • Send Inquiry
  • 60 ton pneumatic hydraulic jack
  • 60 ton pneumatic hydraulic jack

    60 ton pneumatic hydraulic jack

    This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 60 Ton. 

    Can be used for safely lifting, trailers, heavy trucks, buses, construction vehicles and agricultural vehicles. also easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

    With a minimum height of just cm, almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up.

     Our company export pneumatic hydraulic jack, combi bead breaker, tyre equipment, 80 ton pneumatic hydraulic jack, air hydraulic pump with combi bead breaker and 60 ton pneumatic hydraulic jack. If you have interested in our products, please feel free to contact us.

     

    • Quality jack with two large rubber wheels and a long handle with soft rubber grips
    • First-class powder coating on entire construction, attractive and functional
    • Minimum jacking height cm and a narrow profile
    • Operates with reliable hold-to-run joystick
    • Shortcut for quick coupling of the air hose
    • The jack can be moved,  raised and dropped using the handle
    • The handle can be locked in 4 positions; 0 º-45º-90º-180º
    • The body has a 620 mm long reach
    • Increased load stability with wide base
    • The robust chassis is made from mm steel plate and provides ultimate protection of the internal parts
    • Internal and external hard-chrome cylinders resistant to wear and corrosion
    • Each cylinder is fitted with two seals to prevent any oil loss
    • Fast lifting by means of pneumatic high-pressure pump
    • Hook on the side of the chassis for the extensions
    • Screw cap on the chassis for maintaining and repairing .
    • Outside oil filling port for  easy oil refilling
    • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

     

    Lifting Weight:

    60 Ton

    Working pressure:

    Mpa

    Minimum Height:

    210mm

    Lifting Height30ton:

    195mm,60ton:97mm

    Extension  Rod:

    38mm+60mm

    Working Pressure:

    Net Weight:

    65Kg

     

    Final test

    Every air hydraulic floor jack is fully tested at the factory before being packed along with its documentation, ready for shipment!

     

    Warranty

    The extra low garage jacks are delivered with a one year warranty.

    Even after the warranty period expires, the test-department stands ready to assist you with technical support and information

     

    Included in your order

    • 60ton air hydraulic floor jack with wheels and handle
    • CE certificate and instructions for use
    • 38mm and 60 mm extension attachments
    • Pre-filled with hydraulic fluid
    • Packed weight is 74 kg with wooden case, 10 peices of handles with foam in one case ,handles case weights 95kg
    • Dimensions are L 725 x W 340 x H 330 mm
  • Send Inquiry
  • 50 Ton Pneumatic Hydraulic Jack
  • 50 Ton Pneumatic Hydraulic Jack

    50 Ton Pneumatic Hydraulic Jack

    This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 50 Ton. 

    can be used for safely lifting, trailers, heavy trucks, buses, construction vehicles and agricultural vehicles. also easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

    With a minimum height of just cm, almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up.

     China supplier of pneumatic hydraulic jack, 80 ton pneumatic hydraulic jack, air pneumatic bag jack, 50 ton pneumatic hydraulic jack, 60 ton pneumatic hydraulic jack. We have a complete quality management system. Choose us, you can be get most careful and thoughtful service!

    • Quality jack with two large rubber wheels and a long handle with soft rubber grips
    • First-class powder coating on entire construction, attractive and functional
    • Minimum jacking height cm and a narrow profile
    • Operates with reliable hold-to-run joystick
    • Shortcut for quick coupling of the air hose
    • The jack can be moved,  raised and dropped using the handle
    • The handle can be locked in 4 positions; 0 º-45º-90º-180º
    • The body has a 620 mm long reach
    • Increased load stability with wide base
    • The robust chassis is made from mm steel plate and provides ultimate protection of the internal parts
    • Internal and external hard-chrome cylinders resistant to wear and corrosion
    • Each cylinder is fitted with two seals to prevent any oil loss
    • Fast lifting by means of pneumatic high-pressure pump
    •  hook on the side of the chassis for the extensions
    • Screw cap on the chassis for maintaining and repairing .
    • Outside oil filling port for  easy oil refilling
    • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point
    • With double fold pole,easy to be put  in  tiny place 

     

    Lifting Weight:

    50 Ton

    Working pressure:

    Mpa

    Minimum Height:

    185mm

    Lifting Height:

    208mm,50ton:110mm

    Extension  Rod:

    38mm+60mm

    Working Pressure:

    Net Weight:

    48Kg

     

    Final test

    Every air hydraulic floor jack is fully tested at the factory before being packed along with its documentation, ready for shipment!

     

    Warranty

    The extra low garage jacks are delivered with a one year warranty.

    Even after the warranty period expires, the test-department stands ready to assist you with technical support and information

     

    Included in your order

    • 50ton air hydraulic floor jack with wheels and handle
    • CE certificate and instructions for use
    • 38mm and 60 mm extension attachments
    • Pre-filled with hydraulic fluid
    • Packed weight is 57 kg with wooden case, 10 peices of handles with foam in one case ,handles case weights 76kg
    • Dimensions are L 725 x W 365 x H 280mm
  • Send Inquiry
  • Air hydraulic pump with combi bead breaker(2)
  • Air hydraulic pump with combi bead breaker(2)

    Air hydraulic pump with combi bead breaker(2)

    product Description:

    A brand new product, the pump has been checked and tested 10,000psi pressure holding, will be use as hydraulic power unit for varieties of equipments such as agricultural wheels and one-, two- and three-piece truck tires and rims

    Complete aluminium air motor ensures durability

    Internal pressure relief valve provides overload protection

    Air exhaust muffler design for quiet pumping

    Oil containers made of aluminium, engineering steel material

    Special use for porto power and presses

    Foot pedal operated can be used with a variety of hydraulic rams and tools

    Aluminium reservoir makes this solid and unitlight and easy to move around air pressure operation

    China supplier of pneumatic hydraulic jack, 80 ton pneumatic hydraulic jack, air pneumatic bag jack, 50 ton pneumatic hydraulic jack, 60 ton pneumatic hydraulic jack. We have a complete quality management system. Choose us, you can be get most careful and thoughtful service!

    Product Parameters:

    long hose

    Used on construction wheels up to 25"

    Dimensions L x W x H (in.): 

    15 x 17 x 18

    Stroke:

    3 3/4in. 

    Air/hydraulic pump:

    10,000psi 

    Air:

    8000（Psi）

    Net weight:

    60lb(s)
  • Send Inquiry
  • Air hydraulic pump with combi bead breaker
  • Air hydraulic pump with combi bead breaker

    Air hydraulic pump with combi bead breaker

    Product Description:

    A brand new product, the pump has been checked and tested 10,000psi pressure holding, will be use as hydraulic power unit for varieties of equipments such as agricultural wheels and one-, two- and three-piece truck tires and rims

    Complete aluminium air motor ensures durability

    Internal pressure relief valve provides overload protection

    Air exhaust muffler design for quiet pumping

    Oil containers made of aluminium, engineering steel material

    Special use for porto power and presses

    Foot pedal operated can be used with a variety of hydraulic rams and tools

    Aluminium reservoir makes this solid and unitlight and easy to move around air pressure operation

    If you have any question on 50 ton pneumatic hydraulic jack, pneumatic hydraulic jack, air hydraulic pump with combi bead breaker, automatic hydraulic tyre changer and pneumatic hydraulic beam jack, Welcome to contact us, we will give the professional answers to you.

    Product Parameters:

    long hose

    Used on construction wheels up to 25"

    Dimensions L x W x H (in.): 

    15 x 17 x 18

    Stroke:

    3 3/4in. 

    Air/hydraulic pump:

    10,000psi 

    Air:

    8000（Psi）

    Net weight:

    60lb(s)
  • Send Inquiry
  • Automatic hydraulic tyre changer
  • Automatic hydraulic tyre changer

    Automatic hydraulic tyre changer

    to small and medium car, discouraged avaliable(explosion) tire, lower than the flat performance tires, tubeless tires are available.

    pneumatic valve piston rod assembly is made of pure steel, so the surface is more smooth and corrosion resistance, longer life. Drawer control assembly, simple structure, fast and easy maintenance.

    trapezoid colum base and housing overall box welding design, fully ensure the high intensity. Operation under the bearing structure, the overall stability and reliability.

    curved arms designed, so the top hub chuckan expand more room for operation and avoid accidental injury when clamping hub.

    is 15mm wheel chuck parts, with the function of claw size fine adjustment, claw can precise(fine) control at any position, convenient for clamp the wheel, to avoid accidentally injure.

    3mm thickness steel plate combined cabinet, firm structure, weld concealment, beautiful appearance.

    quality all-aluminum cooper motor with advantages of faster heat dissipation, low loss, high power.

    all-aluminum double-inlet tread separation cylinder, fully sealed design, low pressure supported, longer service life.

    If you have any question on 50 ton pneumatic hydraulic jack, pneumatic hydraulic jack, air hydraulic pump with combi bead breaker, automatic hydraulic tyre changer and pneumatic hydraulic beam jack, Welcome to contact us, we will give the professional answers to you.

     

    Motor power

    Power supply:

    110V/220v-1ph 220V/380V-3ph 50hz/60hz

    Operation pressure:

    dia:

    420mm

    Wheel width:

    3-13"

    Rim clamping from outside:

    10-17"

    Rim clamping from inside:

    12-20"

    Bead breaker pulling force:

    2500KG

    Packing dimensions:

    1050x850x950mm

    :

    360kgs
  • Send Inquiry
  • air (pneumatic )bag jack
  • air (pneumatic )bag jack

    air (pneumatic )bag jack

    Air bag jacks  are ideal for all makes of car, especially suited to 4x4 off road vehicles, and also for Caravans and Motorhomes. They are quick lift and down, the1arge contact surface make them more safe and stable, the soft contact surface can be used under any parts of car, and will never damage the car chassis. In addtion, they are compact and light weight for easy storage and carrying.

    ZIJIE Trading Company is specialized in produce pneumatic hydraulic jack, 80 ton pneumatic hydraulic jack, 50 ton pneumatic hydraulic jack, air hydraulic pump with combi bead breaker, automatic hydraulic tyre changer.

    Capacity:

    Working pressure:

    145Psi/10Mpa

    Min height:

    145mm

    Max height:

    420mm

    Air inlet:

    G1/4

    Lifting time :

    5 seconds

    Working temp:

    -60℃-+50℃

    Net weight：

    26kg

    Packing dimension:

    535mm*380mm*210mm

    We are pleased to deliver pneumatic hydraulic jack, 80 ton pneumatic hydraulic jack, 60 ton pneumatic hydraulic jack, pneumatic hydraulic beam jack and 50 ton pneumatic hydraulic jack. Safe payment and on time deliver time will give you.

  • Send Inquiry